Hello guys… I already wrote in December that I sold my A3 to Portugal. The dealer is a good friend of my dad and he said that he had some prospects, and I would get the money towards the end of January. Now my pa told me yesterday that he had telephoned with him and that 2 prospective customers did not get a loan from the bank and thus the car is still sold net. So slowly I really didn’t have a chance!!! that he would sell the guaranteed – he would know many who are looking for an 8P. To legalize the car there he has to laugh 7000 (seven!!) Teuros!!!! Now he wants me to lower my performance price. I’m really pissed and think if I should fly down there and bring back the car. (Was now 3 months without carts…. for what??? –> for nothing!!) I’m really mad! He means that he definitely sells it but that it no ch could take one or two months and so long I don’t want to be without 8P! Greetz, a totally angry ric (who is now going to get coffee)
Author: 00c12f
-
Final stage(s) in Avant
where did you pack your end stages? I want to be able to use the suitcase room as a lying area (with the bank folded) where have you been with the cables for a long time? Greetings
-
Cheap and good 17″ tyres for 80/90 quattro?
Mahleit Audi-Fan-gemeinde, I didn’t find an extra forum for tyres (e.g.), so I post it here: I’m currently tormenting myself with the idea of buying wide tires for 17″-alus next spring: 1) The fact is, the tire is the only connection to the road, if you didn’t mean too well by lowering it, I don’t want to follow the trend of buying cheap tires! 2)Now my tyre dealer tells me “the trust”, I can’t think of platinum tires without thinking. I don’t know what to think of it, the only platinum I found, look like the Fulda Carat Extremo, and they’re absolute shit! (Had I myself for a short time!) 3) Alternatively, I can get some well-preserved (6,5mm) falcons FK451 from a buddy… 4) Or rather plunder the savings stock and a top brand ka ufen? – Drive the Goodyear F1 GSD3 on my B4 Tdi, which is great, but also exciting! Thanks for your support and feedback… Oh so…. comes to an Audi 90(B3) quattro. 215/40/17.
-
total damage, insurance pays 1500€
hello, my father had an accident last week with his Audi 80 B4 2.3E (272000km), he was the last in a cross and a BMW is him with 50 things in the back and has pushed him to the next car. car to the Audi workshop and on Monday the expert looked at himself, total damage, they pay 1500€, car is no longer worth. reperatur costs over 500€ ?? well money for a new one is not there, so what do you do? can you ask from the insurance that you e in equivalent, so also audi 80 etc, pay? pictures I have no greetings
-
B4 1.9 TDI “Do not turn off”
Hello, I’m new here and have a question to the experts. I bought an Audi 80 B4 1.9 TDI with 147’km and now have the problem that the engine only turns up to 3200 rpm. The car has an automatic transmission. “Below” he makes my opinion quite normal – only he does not spin over 3200 rpm and does not go faster than 120 km/h. Turbo whistles can be heard. Up to a speed of 100 the power is naturally normal then I have extreme power loss and the r Motor sounds tangled up. Can someone please help me – does someone have a tip for me? Thanks! Rico
-
Curves Sporttourer – Supersport
Hi guys, first of all, I’m not driving a Kawasaki machine, I’m only 17 years old.So my problem is this: I currently have a 50cc moped (Derbi GPR 50) and I’m about to make the A1 appearance (then 125cc). So with our bike (Kymco Pulsar 125) it’s very easy to take turns because the part is almost “alone” in the curve. Now with my derbi (is a 50cc super sportsman D) it’s very hard to get into the curve bz w. Sneezing position to come…is this the case with all SSP or is the chassis just too bad and cheap here. I will definitely get a ZX6R with 18 (will be throttled to 34hp), but I want to know if an ER6N is more worthwhile for the start (also 34hp). I am basically ABSOLUTER Supersport fan, therefore I would rather learn to drive the ZX6R directly but for the time being properly on such a beast. So my question : Are cornering drives (knee grinding also) at S upersports heavy? MfG
-
my kawa gpz 600 r goes in the run to the red area
hello have such a problem with my kawa gpz 600 r and that is I changed the temperature sensor in the thermostat housing because the old was defective. cool water changed and the fan switch at the bottom in the cooler with a switch bridged. now the problem is that if I run it warm that it goes after not even 2 min into the red area….what can that be? please answer quickly…be with my Latin at the end….bastel is 1 1/2 years and finally get to do. and nu n the problem thanks already for the answers
-
ER-5 put on the road – handlebars crook – Can you fix that?
Hi, did it stupidly manage to throw my moped on the road in an evasive maneuver The damage seems to be limited to some unsightly scratches, two loose mirrors and a crooked handlebar. The handlebar is slightly bent up+back to the left. Now I wonder if you can fix something like this or if a new handlebar has to come here? Have asked the Kawa dealer what a new one costs and they want to have over 100€ for it. is it likely that only the handlebar is crooked or can something else have been easily affected at the fork? The fall was at a very slow speed and I was almost standing when I slipped away. So the moped didn’t slip big on the road, but more or less on the road, and I didn’t have the chance to do it. The stand pipes still spring quite normal. If still running straight ahead, however, was still a bit funny driving feeling, but this is probably due to the bent handlebar… Thanks already for your tips! Greetings Tobi
-
Wheel bearings broken?
With more than 50kmh my moped is roaring (speed independent). Make me worry now that it can lie on a wheel bearing. Since it only occurs with more than 50 things (with increasing speed getting louder) I can not identify the source and do not say whether it comes from the front or from the rear or from the engine (gear?). At 100 or more I don’t hear much about it anymore, but can also be related to the generally high noise level at speed. Both wheels are fixed and have There’s no game. Chain is set right and greased. Have a bit of fear that if it’s a wheelbase and I eat it long and that goes bad. Greetings Klinky
-
Coking earlier
Hello, my wife will get a new car in the next few months. The Kamiq TSI with 110 hp. This is then the 4th Skoda within 23 years. However, the 1st three-cylinder. The problem with direct injection with the coking of the valves is known. Do you have a tip for me in terms of prevention by additives? Or is this all over, especially with the TSI engines? Greeting Frank