Hello, the rear brake pads grind during the ride, the brake pads don’t go back completely and the disc is already slightly red. What do you do in this case? What do you do in this case ideally? Do you want to make the brake pads and the caliper work again? Decompose and clean the caliper, is that enough? Or is this procedure better? : Press the piston back and push it out a few times. Should this not work,Rep.Rep.Rep.Rep.Rep.Rep.Rep. insert pistons into the caliper and when everything is re-assembled. Air the brake system and renew brake fluidity. Who has experience with it? And do I need Bimmerlink to drive the electric parking brake back for the action? Thank you
Author: 00c12f
-
Liquid Glass Pre Cleaner Causes Scratches
Hello yesterday I tried out a small piece with the Pre Cleaner. The paint was milky AFTER the polishing of the Pre Cleaner, as if tiny small scratches were in it. On the bottle it says the following: Wash the vehicle and leather – clearly apply pre-cleaner – clear let in effect until milky veil is formed – clear polishing with a fresh cloth just as it was made and have a milky/scratched stain on the hood. Can’t get that away What should I do? there is something wrong? By the way, Uni Schwarz/4months old. Thanks already Ann
-
Harley Davidson for beginners and beginners
Hello I have discovered my passion for the Harley again after almost 5 years, actually it was never completely gone but the last years I was just someone who looked at the spectacle from the “Tellerrand”. But now I have to do really seriously before my motorcycle show next year and then it is to become a Harley Davidson Nightster. I already deal with some questions in advance that many of you are already an old hat. Despite in-depth search in the Int ernet I could hardly find satisfactory answers to my questions, so I once allowed myself to open up such a beginner area here, because there is certainly more like me. As I said the questions I have, would be occupied only when I really have the bike standing there but I would like to know a lot already. So first of all a question that many of you certainly have never dealt with before. ^^ What about the helmet regulation? I would like to have a Big German (Wehr The helmets that I have seen have no CEC approval, but are sold under motorcycle requirements. Are such helmets allowed without restrictions in Germany or are you in danger of being stopped because they are not allowed? How does the sound technology with the Nightster look like? I would like to put on the helmet) I was told that it doesn’t matter in Germany, however, seems rather unbelievable to me, in a country governed by regulations like ours. If you like to have a Harley-typical sound, but without this typical German whispering crayon, are there legal ways to make it possible?
-
Grinding noise engine front left FLSTC 1996
Since last week I have had a strange grinding noise on the engine. It sounds like it comes out under the oil filter or from the primary box. It changes its sound with the speed but is independent of an inserted gear (so also in neutral). Does anyone have any idea what that could be? Thanks in advance ……. :-)(((
-
U.S. Import Harley Davidson Road King 2008 from USA – what technical changes are necessary?
Hello together, some have already been written and posted. I also bought a H.D. Road King 2008 in the USA in the “Harley-Rausch”. a) Which modifications are necessary in order to get the road registration / TÜV? b) with what understandable costs is to be reckoned with? c) Who has possibly successfully imported the same model (2008 – Road King, injector) already? I am grateful for every correct answer. A real H.D. Greenhorn
-
Ventilation of the crankshaft housing BigTwin 1.890ccm
Ventilation of the crankshaft housing BigTwin 1.890ccm How can the pressure in the crankshaft housing be reduced without losing the motoroel? My engine still has the crankshaft housing ventilation at the bottom of the crankshaft housing. After a longer service life or after a fast highway ride, the motoroel pushes out of the ventilation. The amount is too much than that it can be fed through the intake hopper of the carburetor of the combustion. Who has an idea? Thank you very much!!
-
Helmet suitability after fall
Moin together, I would like to learn your opinions or facts about the helmet suitability after a fall: Fall situation: speed approx. 50 km/h – front wheel slipped away by blocking – after body also bounced with the helmet on the ground, visible damage is scraped off varnish and approx. 1 mm material on cheek height in a size of about 3 cm width and 7 cm length. Helmet is an X-light integral (I don’t know exactly model) of the Nolan Group, all standards are available 6 – 8 months. Is a new purchase from your point of view necessary or should the helmet be able to put it away without a significant loss of strength?
-
*Eldorado-TC cylinder head defective??
Hello everyone. I’m the next with the cylinder head problem. 4.6 he Northstar. I had taken the car to a US workshop because it cooks constantly, especially at mountain ranges. A CO2 test was taken to exclude a cylinder head problem. The test was negative, so first of all good for me. Compression test was okay, pressed off, okay. Suspect was thermostat and water pump. So, let it do…. Then the nasty surprise! The car cooks exactly as before. So wi I think it’s the cylinder head screws, you hear and read a lot about it and that it’s a Northstar disease. If that’s what it is, I’d be happy about nice people who have already done such a repair and can help me. To throw away it’s way too nice. Year 94 and really a great car. Would be nice if a private screwdriver, the spas, would be of course, only the prices that are mentioned in the forum in workshops, I can not pay. I am also happy to join and help. Would be great if someone would sign up. The car is “due to driving” therefore a radius of 100 km around Frankfurt/Main would be still possible. Thank you very much. Greetings to all US car fans.
-
What about truck registration?
Moin, just got my car tax notice from the tax office. Should pay 1268€ tax per year – although my jeep is registered as a “truck open box”. The tax office probably has guidelines that there are certain vehicles (including Jeep) which are admitted as trucks, nevertheless should tax as cars. Supa, wa? Now I pay the state car (the expensive variant) and the insurance truck (also the expensive variant). So the vehicle costs me annually at FIX COST approx. 2,400 euros. ES LEBE DEUTS CHLAND!!!
-
GMC Acadia vs. Mercedes GL
Moin together, was at the Mi on the IAA to look around for SUV’s with 3 rows of seats….and has to confess that the Mercedes GL with Abtsand has the best processing and the best space, also in the third row, and (more important) behind it. But since March I am diligently collecting information about the GMC Acadia, I have compared now: Loading volume has the Acadia according to paper 1000L more !!!! clearly to be seen on the pictures he also has more space inside. Fuel consumption sc But the acadie would be less than half the cost until it is here!!! That’s why the question to everyone: Who has already experienced with the acadie and can tell me something about quality and workmanship. Even better would be information where you can look at one in D times / test drive. Already in advance; am Ami quality already used, I drive currently 2006 Mustang GT and need now still a family carriage. Would be great if someone could help. So far greeting Andreas