MOTOR-TALK

Author: 00c12f

  • Awesome sound for about 130€?

    Hi, a friend of mine will soon have a birthday and I want to build a nice 16er system into his Corsa… It’s important to me that the sound is very good above all!! Level it should deliver enough, even in the bass, because it will run without sub at first… But don’t go soo deep in the bass, rather in the kick/upper bass The system first comes to its alpine, later to a small bridge or something… It should play in the high tone restrained and very warm, but still dissolving. the bass is very tight and top bass-oriented Mostly Goa/Psytrance will run…. Price range is 130-max 150€…. Mfg Olaf

  • Final stage for 150€?

    Hi together, I haven’t had a real sound in the car until recently. Then I got a small blue point power amplifier (with ridiculous 4x 30 watts) and 2 loudspeakers (helix hxs 169, 100 watts) for the rear shelf “collected together” in the basement etc.. Must say that the speakers release quite a lot of pressure, at least much better than just the original sound.. But now I want to start investing a little (I’m a poor high school graduate) and thought of a power amplifier for max. 150 € .. What can you recommend to me? Since I want to connect a bass box later it should already be 4 channels .. What can you recommend to me? I know that the 150€ are quite little, but I can’t spare any more at the moment..

  • Quickly Wooferkistenbau in progress

    Hello, everything is going wrong… I have a BPKiste with the following inner mass bxhxt with 19mm MDF: Closed 37,8*17*54,2 Open without the board above the woofer: 37,8*10*54,2 The board above the woofer represents the reflex tube, in space this is the only construction possibility. If the woofer had enough space on the floor with ~2cm, and above all if the woofer had enough space on the top. If it were to swing out really far, one would have between the sicke and the reflex board 2-3cm square. The r.brett is 38cm long and over covers the woofer completely. The woofer is an audio track AW1200N. The other possibility would be if the R.brett is only 12cm long, the Woofer kante does not reach, and the closed chamber would have a height of 19cm, so that of course the open chamber only 8cm Ask for quick help the thing is in construction and should be siliconed today. Mfg Gaya

  • First car as a third car about parents ?

    Good day dear forenuser, I bought an Audi A4 b5 Bj 1996 last week and would like to assure him that I am 19 years old and have been driving with my parents’ BMW for over a year now, my parents have already insured a Mercedes and the BMW as a second car. My question is exactly how this works with the insurance if I would insure my Audi about my parents, I already Googled a little bit but I have somehow not yet become quite smart n why I opened this thread here (Sufu I also used ) As far as I know, you could have the third car insured as a “second car” in principle, am I right there? My father is worried if I would build an accident with my Audi, that his other two cars would be upgraded in the SF and he would pay more, is that so or would only the insurance for my car be upgraded? What else do I know? n for now my questions, thank you for the answers mfG Kevin

  • Adapter 1/4 to 1/2 – Falsifies torque?

    Hello, I ordered today a torque wrench 1/4 for 10-50nm. Reason is that I want to put on the spark plugs of my motorcycle and just don’t want to go to feel if I can have the certainty for a few euros more. Construction would be: 1/4 torque wrench + adapter 1/4 to 1/2 + Mean extension of 1/2 + nut from 1/2 Now my question: Does an adapter piece in my case 1/4 to 1/2 falsify the torque, since this is the greater weight of 1/2 lengthening ng and has to turn nut along?

  • Garage door opening light tap.

    Hello guys. As you know, only a small lamp in the control panel lights up when opening from the gate.I would like to spice up the whole thing a little bit.I would use 12V LED tape.What is needed?Directly to the 30V light is not…Have the two componetes caught in the eye.Switching power supply,electromechanical switching relay.Is that so feasible? Lg Mike

  • Question about suction sockets

    Hello everyone, have several questions that I hope you can answer! So: 1.What is the ASA doing and where is it sitting? 2.Can a too small ASA pull a throttle? 3.Are 13.5mm too small for a 80s? (Seen from different sides sizes from 20mm, never 13,5mm or similar) 4.Could the ASA be narrowed by something in this so that it leads to a throttle? If you now ask yourself how I come to say that the ASA is too small/constricted on my moped The reason for this is that at alphatechnik.de, surprisingly, I found an expert report for my machine which says that it has open 9kw and 110km/h (from 5kW/80km/h to 9kW/110km/h without conversion parts). There, under modified vehicle parts, remove intake reduction, if necessary also outlet reduction. I have already removed the outlet reduction, according to vehicle papers an 18mm disk. 5.Is there an ASS that fits for my (Honda CRM 75)? 6 Could the original of Honda be bigger? (Was for the chain kit like this, before 13 sprocket and 48 sprocket, original chain kit of Honda:15 sprocket 48 sprocket) I thank you very much in advance and hope for your help! byebye

  • Accident with Aprilia….

    Hi… I put my RS on my snout today… :'(I’m quite normal in a curve inside and to the right. my entire left panel is scratched, my positions are bent and the switch lever is almost in the panel. I’m doing quite well so far, except for a gunshot wound on the knee and the bulging on the right upper leg (bombed against the curb). to all my luck still went my mobile fug…. I was just about to drive and had so the tankcam on it, and the complete crash recorded… I’m just not sure if the video belongs in here/here is allowed! in mourning for my RS, 5tr!k3

  • 70ccm for dt50r

    hi ich mo wieder haben nen 70er auf meine dt but: if I drive nidry speed it runs but as soon as I give a little bit more gas leaves it on the left side of the zilis off and disassembles the seal of the zilis dat thing now has 3 seals shot up why it can lie as I do wrong achja it is always the same place! en kumpel has said that I should clean new studs I also with the product that everything remains fixed (son green adhesive) what should I do? ?can it be that it is located on the zili ? so on the seals it may not have been located have extra original polini 70ccm seals koooooft greetings forrest

  • 190 ccm set for nsr

    Hi erstma i am thinking about whether i should buy a 190er replacement for my nsr… but am not sure if this is really worth it…. can you help me there? au net would be bad if i still didn’t know what I still have to remodel (gassing, exhaust, exhaust…) i am about to lose the big one and so. would be really grateful, after all are almost 300eus