Hello members, I received today an offer from a used car dealer for the above mentioned car. Now I would like to have heard your opinion and experience of the model. To the car: First registration 2006 (T25?) Model Avensis 2.2 D-CAT 177 hp diesel manual gearbox ~235,000km mileage Offer are 2.500€ + set of brand new summer tires(incl. rims) alleged value of 600€ things I noticed are following: Headlights front left was fogged 2 huge scratches on the bonnet 4 small scratches on the left rear door (probably too close to a car) We would also have it checked again at a workshop before the purchase. For me, the engine was relatively loud compared to the previous car (Golf 4 – 1.6 -101 hp – petrol), is that normal? Would you buy the car for the money or would you still have room for negotiation? Thank you for your opinions and experiences.
Author: 00c12f
-
Search Size for Toyota Avensis t25 BJ 01/2004, 2.4, 163 hp, 5-speed
Hello I am in despair, because my Toyota Avensis has for some time a permanently flashing motor light. By changing the lamda probe the error code P0051 has disappeared but the P0766 really makes me think. I was already close to Toyota, they then after considerations (because they did not know the error code themselves and the 2.4 in the version was also uncategorized to you) removed the oil tank of the automatic transmission and cleaned everything because of possible dirt paticles. ..only unfortunately that didn’t help anything and the workshop master doesn’t know how and what and about it I’m really mad because the Toyotos should know best. Now it’s out what it was just really sad why Toyota didn’t find out at the time. I brought my car to an automatic gearbox specialist in Dresden and he found that the solenoid valve works great, but the 5 gear does not switch. the oil change from Toyota was definitely slammed, because with such a black oil and the grids in the oil tank a hint of a mechanical story should have come in any case. At the end of the song is that the gearbox has driven itself but in good German also seems to be scrap, because the couplings have burned and what I know. Now the question is where to get replacement, because the gearboxes with such an excoten are not available at every corner and at every dealer… one of you an idea or someone knows who to turn to to get a gearbox for a Toyota Avensis 2.4 163 PS BJ 2004 5-speed? I am really annoying at the end and only disappointed and would be grateful for any help. MfG Ronny
-
Automatic from Renault / double clutch transmission recommended?
I have found no experience and tests for the offered double clutch drives from Renault. the Clio Grandtour is to have with a DSG transmission. Since I am an automatic driver this is very appealing to me. I know so far only the DSG transmission of my Skoda Fabia with 105 hp. Who can say something about the automatic transmission from Renault? in particular I am interested in the motorization “Energy TCe 120 EDC”. Tips? Experiences? Compared to Skoda DSG transmissions?
-
Tightening torques (for oil changes, etc.)
Hello together, as I unfortunately had to find out, there does not seem to be any repair manuals (like “So is it done” and “Now I help myself” for the newer models, like the Mokka B, more. This is extremely unfortunate, because you can save a lot of money very easily and quickly especially with things like an oil change – is after all no rocket science. Essentially however, the correct torque values for the suit of the oil filter and especially the suit of the oil abl assschraube. I would therefore like it for every hobby screwdriver here in the forum, if perhaps members with insight into the Opel’s own serivce or repair instructions (or others who can say it for other reasons with certainty) could call the correct suit torques for: – Oil filter on oil filter housing – Oil drain screw I have already searched the Internet, but interestingly can find almost nothing at all. It is almost as if this was a good In addition, the list could perhaps be extended piece by piece, e.g. with regard to the change of the front and rear brake pads, the brake discs, etc., etc.
-
Oil drain screw too tight – Torx almost completely round
Hello dear community, already done several times oil change but now for the first time with the Mokka X. The screw sits incredibly tight – and the Torx is also almost complete round. I will now try to spray it over a few days with WD40 and then try again, but should it not work, then I would need a plan B. It is a round screw with 40 torx. Which auxiliary tools you could pull to the side, if it is about the Schra ube to drill out? I would be happy about any tips. Greetings
-
Adblue injection valve 1.6 cdti 136 Ps
Hello, with my Mokka X Built. 2019 110000km it is indicated to me that my adblue system should be maintained. But I can still drive a few hundred km and my Mokka drives also quite normal. As a frequent error source is called an adblue injection valve which is no longer working properly due to deposits. I would like to clean this before the cheerful parts exchange starts with the FOH. There are great horror stories in the net with corresponding information about this kind of thing. My question to the specialists is, where is the valve installed and what should be taken into account when installing and disassembly? Does the valve have to be re-learned after cleaning, which only the FOH can do? Greeting Mike
-
KBA recall: TAKATA Airbag
I’m not sure if everyone can read everything without registration, so I create this thread here. Here is the LINK -> [https://www .kba-online.de/gpsg/gpsg-webapp/informationServlet] for the KBA entry, it is a supervised recall, therefore the exchange must take place, otherwise the car will be shut down. All produce Mokka As can be affected. The own vehicle can be tested at Opel itself, simply on the basis of the page Enter your FIN: Opel Callback Action Checking – Opel Callback – Opel DE Greeting D.U. After the link for the PDF is swallowed here in the forum and does not lead to the specified page. Have now inserted an empty step after the WWW, if you copy and paste the link now and then remove the empty step you come to the PDF
-
Mokka B – Advertising, Campaigns & Marketing
Of course, this thread should not be missing with a new model and can already be filled with some content before the actual market launch. In addition to Instagram, Facebook and co, the communication measures for the market launch have already been started cinematically: We started with a first meeting of Mokka and Jürgen Klopp…https://www.youtube.com/watch?v=-osVtGHGZbk …to try with two small teasers a little later, the interest in the mokka to wake up…https://www.youtube.com/watch?v=AgIVJt4A2EIhttps://www.youtube.com/watch?v=RlA2YwmV1mI …and finally to reveal the disguised king of Erl with another video.https://www.youtube.com/watch?v=wo9Qj2WixiE Next was the revelation of the new lettering…https://www.youtube.com/watch?v=vFopgsplx1M …and currently with another video that picks up one of the teaser again and (computer-animates) shows the revealed mocha.https://www.youtube.com/watch?v=UFT8 -B17qg4 What do you want for the new Mokka specifically as further marketing steps (product videos, etc.), what do you think the perfect commercial for the Mokka should look like and in your opinion Klopp should then apply for the Mokka later or should another/other/no testimonial (such as Bettina Zimmermann, Eva Padberg, ..) be able to do?
-
Blackworker or “without bill” seller here on MT… What do??
Meal. I don’t know if this fits into the forum, I think rather in current topics but there I can’t make a post. I’m concerned that more and more people are slaughtering several cars and hiring parts of them here. I really like this, not only because they take away customers from me, but also because they post e.g. in the same topic and underbid the price at multiple times. That’s just not competitive. You are then snatched up by w I have absolutely nothing against it when someone kills a car and sells parts of it, but there are some here, which strangely have a part in stock for each car. What can you do against such people? I have a few “known” seats at the tax office, should you just copy such pages and send them to the tax office? Please don’t misunderstand me, but undeclared work can drive companies into bankruptcy, we must give guarantee/guarantee and show the value added tax, in addition we pay business tax, VAT, income tax, workshop costs and and and, since you can simply not keep up with the prices of various black workers, for that you get from us an appropriate quality of the goods and if necessary always replacement when something breaks. MFG ECOTEC
-
No surveys possible?
Hello, why can’t a survey with selected answers be started in the MT forum? I actually wanted to know what the percentage distribution of the different models looks like… And again to search: this doesn’t work at all. Just yet I tried to search for “surveys” – no threads found. Only about the google-search there are answers – otherwise it looks dark… (neither ie nor firefox work)