MOTOR-TALK

Author: 00c12f

  • Heaters as preheater does not work

    Moin people, I have several problems with coding the preheater at the 730d Bj 2001 and hope you can help me. You should change the following values in the NCS: IKE: Preheater active IHKA: Additional water pump active Stand-heuzung_Concept sh_high_without_lock valve IKE is displayed in the NCS. I don’t have IHKA. I have IHK, instead of IHKA. What does that mean? In the IKE I have a preheater from non_active, on active. In the IHK I also have additional water pump active. The entry Standheuzung_Concept sh_high_without_lock valve is not available. For this there is the entry Standheuzung_Konzept sh_high_without_lock valve. For this there is again in the IHK the entry Standheuzung not_aktiv. So after I have active stand heating(IKE) and additional water pump active (IHK) coded, is also shown to me Standheizung in the display 16:9. There are: time 1, time 2 and direct operation. If I click on direct operation, the hook goes out immediately again and nothing happens. Then I have set a time and waited. The red lamp f ür SH lights up all the time, as it must be. But when the set time is reached, the red lamp goes off and nothing happens again. No noise comes, just nothing. Can you help me there somehow? Do I still have to put on active in the IHK heater? Or where is the error? fuses from the SH are ok. Tank is half full and the battery is new and charged. Vehicle is an e38 bj 2001 730d 193 hp. Greetings Mark

  • KGE smokes

    A hello to everyone And again a proplem with my BMW 740i f01 I changed the hose air intake a short time ago from Turbo .. was really mega a lot of work. 2 days later I also changed the KGE allso the pcv valve for an upgrade valve, looks really horny is made of aluminum not so cheap plastic Well is all that funny but that he now always smokes when I charge pressure and it smells like burnt oil .But did not find any leak. Alls I get the Pcv valve I’ve seen that the engine room with oil is dirty all so only cylinder 1 because the old pcv valve was defective and it was pushed out by the kges (tube) . I have wiped it out a little bit but think times when the head gets really warm come the alley or ? But if I drive without charge pressure it doesn’t stink . What funny is it comes oily smoke through the ventilation has an idea has really no plan anymore what I should do with this drecks box hardly have a pro p solved comes the other. I am grateful for every tip. Vdd was also exchanged 3 weeks ago. Please excuse my German and spelling.

  • BMW E63 630i with the N52 engine, cylinder head seal ?

    Hello, I drive a BMW E63 630i with the N52 engine, currently it has 177,000 km on the clock. For some time I have to refill cooling water regularly. I also have the following problem: If the car is standing longer than a day, it starts badly and takes about a minute until it runs round. He smokes out of the exhaust, which only happens after the first ride after longer service life. As soon as the engine then runs, everything is fine, and also at the parking place n and restarting there is no problem – no smoke, everything is running smoothly. Has any of you ever had the same problem and could fix it? What was done with you? I am grateful for every tip! Thanks in advance for your help! suspected on cylinder head seal usual with these motors ?

  • Start problems with Kawasaski Z650 B1

    For many years, the Kawa has refused the start service if it is longer than about five days; then only something goes with start pilot or/and bridge from the car. Previously done: Original ignition coils exchanged for that of a GPZ. Renewed carburetor parts. Switched to DYNA contactless ignition. Powerful gel battery tried out, which resulted in partial success; but I had ruined the battery because I had connected it to a normal charger… Regulators and rectifiers by a compact unit replaced. Recently as good as all cables of the tree renewed, while eliminating some bad masses. Now I stand on the hose… Can someone help me down there again?

  • Motorcycle lifters and chain sprays

    Moin, bought a motorcycle yesterday – my first – and changed it today as well. Only the ticket is missing, but that’s what I want to get started the next few days and get me the most necessary things for the “everyday” use. Since I don’t have a main stand (Ducati 750ss) I need a motorcycle lifter. At Louis there is one for 20€; but also some for over 100€. Is the cheap enough, or do I have to spend a lot of money? Still chain spray. Are there qualitatively large differences? And if so, which sprays / cleaners are good? THX 4 Help

  • Perfect hours on the motorcycle makes sense?

    Moin, I’m about to make my motorcycle driver’s license. I already have a car. As you know everything, or at the latest now, you have to do 12 mandatory hours (5x highway, 4x highway and 3x night). I personally think that’s unnecessary. After all, I’ve already done everything. I just did my first country road rides. It was a little unusual, but no problem. That’s all I have to do, in my opinion. Of course I still have to experience I don’t need a driving instructor behind me, who will keep me from 33,60€ for 45min; especially since he can’t do anything if it disassembles me anyway. Another example: Night driving. Doesn’t it matter if I’m sitting in the car at night, or on the booze?!? 12 Pflichtstunden cost me about 400€. If I think that I could save at least 9 of it, I just grab my head. Well, 9 driving hours are only 300€ … are kind of peanuts. Just get rid of it.

  • License plate motorcycle?

    Hi! Since I want to buy a motorcycle I also need a license plate and you can now save yourself online, how many letters and numbers fit on it? Have already KIB and then I need something, wanted BB182, because of my car license plate, but think that will be too long, or?

  • Pay attention to this when buying used goods

    Since again and again the question “What do I have to pay attention to when buying used goods?” arises, and since I have been pressing around for a year now, I write a list now. Test drive So, fedich. If you take time when buying used goods, and work through the list, there can be no nasty surprises of your own (of course – you can’t see in the engine). If anyone else has questions, or additions – so greeting Dominik

  • Gloves, shoes (waterproof –?-)

    Aloa, unfortunately the search is still disabled and did not really find anything during scrolling. I still need gloves for the summer time, preferably light gloves inc. good protectors and watertight. The same applies to shoes. There are always overcoats to buy but I don’t want to have to carry everything with me every time. Are there in both areas which would not blow up the bench and would be quite good?

  • Top Ten of the motorcycle rider

    When I am today My home stretch I am (of course Slow And Cozy…), For the first time since a long time A fuse burned down. And indeed In relation to 1. Other road users and 2. Meaningless construction measures So My personal “enemy pictures” Bzw. Massive blood pressure increase elements are: 10. Construction site: We Split The New, pothole-free, Hardly 2 years Old road 9. Any motorist, The Not Knowing The One car More than 2 courses Has 8. Car ride R, The Still yourself At Grot (Yellow-Red) About The Crossroads Come, I But Not 7. Bauer, The With Your Tractor Firewood Home Driving (GANCH Important, So In Summer) 6. Any Dutchman, The With Your Caravan Lame Traffic (Bin Today 19 Of Which Meets) 5. People, The On The Road On The Wrong Side Running (With False Is Of course MY Page Meaning…) 4. Cyclists, The One The Ideal Line Disabling 3. Renters On Bicycles The With High-Red Head At 30°C In Sc “Only times fast” Igendwohin must have had 2. Family trips with little children, The thanks of the strategic plan of the father Short Before the collapse (Possibly still with a tricycle) ((The children, not the father…)) And My Absolute number one: 1. Behind a police car must drive. I would ́mal gladly know what to do in your motorcycle life So Nervt….So Me is enough that, That’s why I ride in summer Mostly Only After 19.00 o’clock….