MOTOR-TALK

Author: 00c12f

  • Citroen C5 BJ 2012 Limousine – stroller suitable?

    Good day I’m new here in the forum and have some questions directly. I would like to buy a Citroen C5 Diesel Limousine in the near future. This is BJ 2012 and has just run its 50k. The exact model is called “Citroen C5 2.0 HDi 165 FAP Exclusive”. As we expect offspring, but I don’t have a pram at home so far, I wanted to know if any of you can tell me which trunk dimensions the C5 Limousine has. Fits there a commercial pram there in? Second question: The model I have in mind is equipped with 6 gears automatic transmission. The engine delivers 120 kW. Does this speed up enough? Or are there better alternatives? I often drive the highway, so far with a Toyota Corolla with 85 hp, which is quite a disaster from time to time. Thank you very much, Fo0

  • Negotiating margin at the dealer

    Hello together, I’m just looking for a car and I’ve also found one that I like. It’s at a dealer and the days I’m going to stop by for the test drive. Now the Seat Ibiza is available for 13,99€, it’s a new car. Now as a woman I don’t have a lot of idea of cars – which is why it should be a new car – and ask myself how much the price is still negotiable. I would like to have winter tyres, for example, and it will be I’d like to hear about a connection guarantee after the 2 year manufacturer’s warranty in the description text. As I have no idea, as already mentioned, I would be interested in the experience values. Some of my friends said that it’s not bad if I go there alone as a woman. I see this differently and don’t want to be dragged over the table at a dealer’s… Do you have any tips? LG

  • Car purchase online – everything from a single source

    Hello everyone, I’m currently dealing with buying a car for the first time and I have to say that the topic is already overburdening me. Which car is suitable for my requirements, which parameters I have to pay attention to when buying, which insurance is best for me, how should I finance the car…..etc. In order to finally estimate the monthly costs sufficiently accurately and at the same time also the most favourable conditions for insurance, financing etc. out I have a bit of a spin now: Wouldn’t it be super helpful to have a platform such as Mobile.de, through which all these time-consuming activities are handled from one source. From initial advice to contract conclusion to registration or re-registration of the vehicle. It would only be enough to provide its data once on the platform, instead of at any provider such as insurance, credit institution or comparison individual? At the end of the day, you could simplify the entire process of car purchase with everything that is included in it. What do you think about it? Would that be something that would appeal to you if it worked? I’m looking forward to your opinions.

  • Trailer purchase Westfalia 1972 Purchase+renovation

    Good day, I need help in buying and estimating the renovation costs of a trailer (PKW) Today I spotted a Westfalia trailer and could get it for 2 boxes of beer.Year 1972, German papers, no tuv, standing for 3 years outdoors, length 2,20 m, height 1,30 m, width 1,30 m, total weight 1200 kg, with tarpaulin construction, tarpaulin is intact without holes bode plate screen printing and exterior walls should be made new. (Siebrduck plates approx. 250 EUR) Brakes should also be made (approx. 50 EUR) The frame is rusty, here we would have to do welding work. (approx. 100 EUR) Right turn signaler/light holder would have to be renewed (approx. 50 EUR) I could not check electrics (???EUR) This would be intended as a possible winter project. Renovation costs around 400-450 EUR. Would that be a possible purchase, or would you advise here due to too high costs? Are the costs realistic, or too expensive Thanks for your help.

  • Resignation from the purchase contract, when is this possible?

    Hello, I am not sure if the topic fits into this subforum, if not please move! I have already used the search function but in my case not received a suitable answer. Now to my request: I decided last Thursday for a car which I discovered online on mobile.de at a Ford dealer. After a short telephone call and clarification of the modalities I promised the seller to buy the car by phone. He then sent me an e-mail. rmular sent with the heading “Compulsory order of a used motor vehicle” . I filled it out, signed it and sent it back by e-mail. In addition, I transferred the total amount of the purchase price on the same day. In the order which the seller sent to me, it is stated in the appendix under the conditions: “The buyer is bound to the order for a maximum of 10 days. The purchase contract is concluded when the seller accepts the order of the purchased vehicle. The car should be delivered to me the next week, because I do not pick up the car myself. Since the vehicle is almost 500 km away. Before delivery the car dealership wanted to carry out a new TÜV and inspection. Since I found a clearly more attractive offer yesterday, I would like to ask if it is already too late to withdraw from the contract or which one. Costs would come to me. Would I be very happy about an answer! Greetings

  • With 40 the first motorcycle:-) a chopper!

    sorry first always write everything small! it’s been a long time since 20 years ago that I made a and B ticket!!!! and this year I have overcome myself and bought me a yamaha 750 virago! the reason is simple! wanted to put in no leather suit and thus I have zero experience! my decision on this moped liked 🙂 and 44 kw did it too! at the beginning I went to driving school took me an hour because I was just afraid something wrong to mac hen! dAnn we picked her up from above Austria! but I let my friend drive and curvy with a car after! because wanted to be alone at the first drive out! would have made me feel sorry if something were going on! and then she first died off:-) and then I rolled to the first cross and wanted to turn left! and went off and noticed I couldn’t make it! at least I thought that:-) and gave gas! and already I went up and lay there 🙂 but it happened nothing! then I had the first one. I was afraid to drive away and thought I was too stupid for it! and was afraid when I was driving to a traffic light! then I said to myself! soooo michi now you can practice:-) I made it and I drove into the city extra! and suddenly it worked as if by itself! now after 3 months it is quite normal! the same was with curves driving! at the beginning I dared myself little! but then I drove extra mountain or stretch with a lot of curves! and luckily there are enough such stretches in canned enough:-) and now fa hr ich wo zb: 70 is allowed with a good 90 to 100 in the curve! doesn’t sound bad but I’m driving a chopper! and who knows chopper is not necessarily the moped for curves 🙂 just wants to say no matter when you start driving motorcycle! you can learn it and then make fun 🙂

  • Sell 1x seat card for Nürburgring

    Hello, have a ticket for the Grand Prix of Europe next Sunday. As I can’t give the ticket. The ticket is a 3 day ticket incl. pitwalk on Thursday. The seat is located: T10b block C row 5 With direct view of one of the big screens. The card has the category Silver 3 and usually costs 230Euro I offer the card for VB160 Euro. You can agree on payment and shipping if it is time. If you are interested simply mail to info@k opiman.de or by PN if it works. Greetings Michael

  • Which motorcycles can I drive with A class with key number

    Hello I made today my driving license of the A class, on the driver’s license is A A2 A1 AM with star but with key number 46. according to web page means 46 Only three-wheel motor vehicles. But my instructor has said I can drive up to 24 years motorcycles with 48 ps afterwards open. I did the test with a bmw f 650 gs full 71 ps, in the theory exam or applications A did not A2 A1 or AM. Only on the driver’s license the key numbers irritate me. I now drive everything, is my driving instructor right? the tuv also said nothing but I drove with the big machine. With friendly greetings

  • Low motorcycle for little woman

    Hello together, I think that you know enough questions of this kind, but I still have to ask, because I don’t know anymore at all… To my problem: I am only 1.62m tall and therefore also need a motorcycle with a very low seat height. At the moment I drive the Suzuki GS500e (Bj ’89) with a seat height of 79cm. In itself I come down already, but with shoes with a raised sole and then only with the toes. And after a after my last tour was dropped by the old lady and now she has a bent handlebar, bent clutch lever, neat scratches and a (at the moment only deep) scratch in the oil tank I wonder if it would really be time for a new motorcycle. I still have to tighten the chain, need a new rear tyre and new brake pads and discs… But that’s not all, I’ve already flipped it four times now (in the stand) because I It’s not enough for me to get to the ground. Unfortunately, I’ve had enough simple trackers. In the driving school I drove the Kawasaki EL 250 and got super on the ground, I drove safely and had a lot of fun. Unfortunately, I can’t say that with my current machine… At the moment I’m just fucking insecure So what I’m looking for: – a machine with a low seat height (max 73cm) – I don’t want a racer – and also no pure chopper (Cruiser can be found in the Grun i.o. – I just want to sit more or less like on a naked bike) – would you like to have an EL250 with more ccm and above all ABS. can you help me with this? Thank you and best regards Chaya

  • Import motorcycle from England.

    Hello, I ask here on behalf of my brother, did not have the idea of 2 wheels, so don’t complain, if I don’t express myself intelligibly My brother just sold his machine (Honda CBR 900). Now he is looking for something new. He has now been looking for Motoscout for some time throughout Europe, and look, in England Suzukis (at least those he could imagine…) are relatively cheap. He said what of 3,000 EUR instead of here 7,000 EUR. I said “these are pounds, so are about 4,500 EUR.” But even that would still be cheap. Where is the hook on English machines? Are they different from local ones? Does the customs require horrendous import sums? Has anyone ever done something like this and can give tips? mfg Burning Ass