Moin love two-stroke friends, So I now had “quasi” for months calm with my baby. Except that more and more has opened up, that my low pressure gasoline tap probably had one away (starting difficulties after longer standing). I finally changed it. However, I still had the problem that he did not jump in some places really well. So I just sporadically went on false air search and see there: The suction nozzle was bursted / torn. Since I Now I didn’t have any original to hand, I took an open one that I still had to lie around (No, no intention to do it but as a transition until the original suction nozzle is there). On the way to work the thing suddenly popped around, took only minimal gas.. Speed 5 – 15 km/h. I thought the seals might be on the membrane block, so I ordered them as well. They were there earlier, so I installed them directly. No change. The same problem still exists. The new vacuum box definitely does what it is supposed to do. Unfortunately, it is not an OEM part but because I got nothing else here in the local shop, one of Naraku. I’m a little desperate right now, which could still be. Especially because in the beginning it takes off gas.. Then it shits off, stays like that.. And then it happens that he briefly gets sucked in and gets the built-in in in the hope that it finally works. If I try to pull the gas tap through then it sounds to me as if it doesn’t ignite any more. So if I keep this all the time, it just goes out. Before I thought it was something on the lollipop because it didn’t go out when I stuffed my finger in the air. He just pulled air from somewhere else because I forgot to put a screw in the box. Because that’s not the problem, too. Well, I hope someone here can help me get my baby back to work.
Author: 00c12f
-
Parking despite parking bar
Hello, a question I’ve been asking myself for a long time: If a parking lot (NO WE ON private) has a parking bar or something like that and this is NOT set up. What happens if I put myself in the parking lot and if there is no additional sign “private parking place” there? I did not have to do this either. I know that you don’t do that. But would still like to know how the legal situation is. In my opinion, the parking lot is thus open to the public and it is standing. t nowhere written this place jmd. has rented or similar … Thank you, I hope you understand my question correctly, I have no evil intentions!!
-
Zimmermann brake discs – direction of running
Hello municipality, today my new brake discs have arrived. But after I opened the package I got a shock. The brake discs have a running direction. As shown in the picture it is 2 left brake discs. Or do I see this wrong? With the right brake disc the holes would show in the wrong running direction! Do I see this right? Am I already thinking about sending the brake discs back. I am grateful for tips Mfg Michael
-
VW Polo new gas fields – now tailgate closes badly in cold weather
Hello, maybe someone can help me or give me a tip. With my polo (already 10 years old – but still good) I had the gas fields of the tailgate changed in late summer. 2 Stabilus Lift-o-Mat were installed. At first I was thrilled – but now I almost regret the change. As soon as it is a bit colder (goes already at about 5 ° C in the plus area) the tailgate closes extremely bad. You have to thunder down quite nicely to get it locked in. If you have this there nn has done a few times, then it is strangely as before. Has something been done wrong during installation (something to adjust etc.) Who knows advice Thank you
-
Jacques Villeneuve back to the F1
And what do you think of this?? Do you think the trulli will be replaced?? Or just a rumor again?
-
Nissan Micra K12 2010. Extend rear light to replace light bulb – PICTURES-
Brake and driving light at the rear left the lower bulb was defective and the tail light was removed. All this is done when the rear flap is opened. Do not try to go over the inner lining. First unscrew the two screws and then with feeling also loosen the left side of the tail light by jerking. It is clicked there and I marked the pen red. In no case somehow go in from the side with a screwdriver and the whole levering as well as in many YouTube video Then unplug the plug. Then remove the black sealing mat and remember the position. Click the lamp holder also over the red circled area. In the case it was the lowest light bulb. Replace and rebuild in reverse order. As said, pay attention to the correct position of the seal. Total construction time 5 minutes
-
Nissan Micra K11 Bj.98 does not inject
Moin people, I got a 98 Nissan mica k11 with 1.0l 54 ps from a friend. I want to make him run now of course. He has fuel up to the injection nozzles. Ignition spark is there. Petrol pump runs and promotes. Immobilizer unlocks , immediately ignition is on. He just doesn’t want to inject. What can this be? Engine went out during the ride and then did not jump again. Hope someone can help me. Greeting Fabian
-
Discontinued tax periods?
Meal, has someone ever had problems with adjusted control times (valve drive)??? For example, my bump problem starting from 5,500 rpm has opened up a new aspect. The position of crank to camshaft should actually be correct, because two weeks ago only a timing belt change took place, but what about intake to outlet camshaft? Greeting Markus