Hello, can one with these sofa scooters, which look like “full-eat wild boars”, these long-wood transporters with the two tiny little wheels, in residential areas not neatly, correctly drive around the corner ???? Must one cut each, even an unobtrusive road estuary as a left-hand bender so that an incoming scooter driver remains only the full braking ?? Thus happened yesterday: If my “Gazelle” had not stopped immediately and on the spot, this “full-eat wild boar” would have driven me fully into the flank although I was not even in the crossing area !!! Even a cyclist as a right-hand turner would not have come through between “wild boar” and embankment, so far was the one to bend on the opposite road !!! Quick direction change and evasive maneuvers (laughter) are probably not possible with these heavy, “full-eat boars” !! ??? or ??? …and just for that one should with such a heavy K without cutting any curves !!! already no confusing !!! Later I heard him again “(neighbor, next cross road, few houses further on), apparently he was at the “engine tunen”, since he has turned up the engine several times in idle …..(tubed through the whole residential area) !!! crunchy !!!
Author: 00c12f
-
Increase credibility by verification? …is that feasible?
Hello dear people of MT, I have been active here for a few years now and have already written one or the other post. Most probably with my own opinion in the purchase consultation, but in my opinion also liked more than hated. Unfortunately, there are always current cases in which one believes to be in the wrong movie. The best example for me was the beloved Hans… who probably glued us all. Not that I was in his inn every day, but his Contributions have always been informative… I believed him, like so many others. Now there are people here and there who claim to be his e.g. car dealer or insurance specialist and unfortunately you have to doubt whether the whole thing corresponds to the truth. Long speech short sense: I think a kind of verification or identity check would displease one or the other here and the garbage would be easier to discover or separate from the “good” ones. Of course everything voluntarily and perhaps in three levels. I don’t know. In other areas of the Internet, it’s also possible. Costs? You have to talk about this and personally the proof of my faith here would be worth something. Others might as well. I have some ideas and suggestions about this, but first I want to wait for a first feedback from you. Until then… and who has it today: a nice holiday!
-
“Aggregatethreads” – the egg-legging woolen milk sow or the death of the readers?
With all due respect, but the constant merging of different threads into a collection thread should be done with a little more overview. Just because a topic fits almost into a large container, it doesn’t mean that it is correctly picked up there. That’s how it happened to me often lately, and then I don’t want to follow the topic any more, I have to do better than to search through page-by-page postings every night. Currently in the B8 Foru m (VW) there is a collection thread: Defects on the Passat B8 with over 1,560 posts. Who reads them please if he is looking for a solution to a problem? Even my own topic can not be found quickly, not to mention further answers. Did I not get into the B7 forum in the last 4 years. Wrong? Then just look at the first page of the respective forum and count the “collecting threads” that you notice. Sorry, but you can It’s also a bit exaggerating with the clean-up. Unless you have too many users…
-
You want to say thank you….
http://www.motor-talk.de/…/…k-we-wollen-danke-sage-t5513390.html The idea is not bad, but it limps something. The users should name helpful users and do so diligently. Now, however, one reads again and again that forum godparents and moderators cannot be considered or are not available for choice. However, in your articles (blogs, news, forum threads) one reads nothing about it. Why not? Especially the forum patents were often chosen by the forum users….not without reason, as I do. Think. The mods have earned themselves somewhere and at some point (and still do it today) and got the job…… certainly not without reason. What about the godparents and the mods?
-
The Autopapst (Andreas Kessler)
a very great type! just at wiso in zdf he has shown once again what he can do. this is pure bullshit and people stupidity what this person does there. battery pole loose is already happening. relay defective as well. but if a fuse burns through then there is one reason. what use it to replace the defective safety without finding the reason for it? Absolut Nix! has already happened to me on the trip on holiday. total failure of air conditioning and ventilation. new safety pure and everything goes back to the acceleration stiffen! was really not funny. and to find the reason for a defective safety is probably a little too much from a pan helper. was in my case a whole day troubleshooting, harness cutting, measuring, switching plans rolling,…. the 3 errors occur at the same time is also very unlikely. and what is so bad about my car being towed to a workshop? the car club carries the costs! so her Kessl he and wiso: if you want to test seriously you have to raise your level more than clearly.
-
Elchtest C-Class
Hello, is there a particular reason why the bad performance of the C350e in the Elchtest is not addressed and instead articles about Mercedes from North Korean production appear? You don’t have to notice everything immediately, but it is strange. There is also no place to discuss the topic. In the Mercedesforum there is certainly not the right place and in the article on the recall of the S-Class there are complaints.http://teknikensvarld.se/…/http://www.heise.d e/…/…350e-Plugin-Hybrid-im-Elchtest-2866231.html Comparison table of other models: http://teknikensvarld.se/algtest/http://www.motor-talk.de/…/…sse-the-belts-exchanged-t5479656.html
-
either you adjust your terms of use, or you stop using the automatic hyperlinks!
If you read your terms of use, points 5.1 and 5.3, you show me that I am responsible for my writing, my pictures, and all links. However, you automatically generate links from which I distance myself from certain keywords, but which, according to the terms of use, fall under my responsibility. Examples? I did not link terms of use! This is not possible, and I urgently ask you for short term terms of use. I’ll tell you what I’m talking about.
-
Identification number
Hello Workshop When do we Austrians get our license plate back? Since the change a few days ago the license plate has disappeared. The license plate is still visible with the German users who had one before. Viktor
-
Set petrol pressure, increase,c20ne
Hello have brought me a BDR adjustable with watch. how do I go? to the engine. C20NE with motronics 1.2.5. Eprom aerated,angapasst! Cylinder head channels extended to 40mm, valve seats to the outside.Ventile polished erl. head planned. to come to a compaction of 10,5. Fan manifold,4.2.1 with 55mm connection tube to 24V steel cat.57mmto group N. Bohnrat power tube(only because the rubber part was risked)Nass air filter.K-N. The engine is running really well, only if it was very much outside m it is a fraction of ner Secunde, like every car with the hot Lambdareglung. the system pressure is 3 bar, if I install that part, the pressure must have already 3 bar without negative pressure and it will be series already more than 3 bar. who knows itself? don’t want that I already come under serial pressure. how is the pressure series in stand? so that I have a basic setting and then can increase the stepwise. would like to see then on the role so that I can see if it is fat at vollast. I feel like he starts braking at 6000.Magersquecht? achja the camshaft is from sight with 130 Ps. so nothing world-moving. must come there with a little more petrol pressure. would be very grateful for your help. gr. armin Possmann
-
MOVANO replacement engine for 3th defective no warranty?
Hello guys, maybe someone still has an idea what you can do in order to somehow get to a culant/guarantee acceptance. to the facts. Movano is commercially used = 1day failure without Fz, without car rental = 1 day no money earned! Movano bought 2004 > 2008 various problems (electric wrongly connected and and and and)03-04/2008 – Turbocharger defective + Turbo replaced – FOH determines MOTOR flatt ( FOH tries to get 15 days new engine) + engine changed after 3 weeks (c a. 10000 Euro all together without a rental car)10-11/2008 (about 30000km since new installation) – engine makes loud noises – FOH checks and says cause: noises from the pleu bearing + repair: crankshaft (after 14 days) renewed, operating materials OIL & frost protection replaced “guarantee takeover by OPEL”01/2009 – vehicle stops on the way – ADAC pulls Fz to the FOH – FOH makes the following TECH2 test, actuator test pressure valve electr., connection valve measured, control unit measured + repair: cable interruption fixed and additionally air filter insert renewed (164,40 Euro) 07/2009 (about 80000km since new installation) – car runs unround and rusted (about 30000km since new installation) – FOH finds errors after 2-3 days = cylinder head seal and cylinder head must be replaced + after approx.14 days car finished costs 4100 Euro oil change / belt change have always been made. After consultation customer service and service manager at FOH the following result! Opel does not assume any warranty or culpability in any respect, because there is no inspection scatter! Now to my question: When 10-11/2008 the crankshaft was installed, was surely the whole engine tested, more than during an inspection? Would you have seen if there was a problem with the cylinder head? At the tests/work 01/2009 someone could have noticed that there was a problem with the cylinder head? eug already 3 weeks on the farm also the customer is addressed: “You should join the inspection immediately.” Thank you for your answers! Greetings