MOTOR-TALK

Author: 00c12f

  • Disability rip-off despite disability parking card

    I can warn all the disabled to go to Dahme or Grömitz because there I still have a disability card for 28 years. When I immediately filed an objection the bus fee was only increased drrastig. So be careful if you go there. it was simply said that my ID card was not seen; but I even had a witness with me. I remember this at certain times, where no consideration was taken of the disabled. Are we in these I haven’t heard anything about a complaint filed by the supervisory authorities. Apparently, these indebted communities must now also collect the money from disabled people. Poor Germany.

  • Urgent search for purchase advice (disabled child)

    Hello to all specialists, I am in an emergency situation and I urgently need a new (but used) car. My son (4) is disabled and I am looking for a vehicle that offers the following: -5-doors –A little higher in the entrance (at the back, above all) or with higher doors, since I have to lift my son in the car now and probably for a very long time –divisible rear bench –air conditioning — child safety –drive about 15000 per year –price approx. 5000,- – max. 10000,- Could someone please give me a special mark en/models recommend? Also a dealer recommendation if you have experiences. Thank you very much! Many greetings from Munich, Mrs. Hilflos

  • Motorcycles for drivers with disabilities

    Hi, a friend of mine recently has a stiff leg (left side, no knee joint anymore) and doesn’t want to hang the motorcycle ride on the nail. Now he is looking for ways to remodel motorcycles or on a motorcycle with automatic or what else there are solutions. If jmd. has a few internet addresses or addresses on site (Niedersachen, Region Braunschweig) or even here can give some information that would be great. mfg

  • Does my application for car help have any chances?

    Hello, my name is Stefan, I am 38 and I have been with Parkinson since 2014. I have a GdB of 50 and mark G. Since 1.12.2017 I get full EU pension (approx. 830 euro) and still want to work. I start a job on 22.1 in the call center. approx. 54km away from the place of residence. The job is for 30 hours a week incl. weekend shift and late service until 23 o’clock. By public transport I do not come to work, because either so early or so late no bus is driving. My current car is 11 years old has 176000km down and a value of approx. 1500 euros. Repairs incl. winter tires I would have to invest for approx. 2000 euro. Now I have submitted an application for car assistance for a car with automatic. But I am afraid that the application is rejected. I have the 15 years full and therefore the DRV is responsible. The Rehabearbeiter wanted to say nothing on the phone, only the look whether public means of transport drive, if they look at the times they do not. If the first bus arrives at the place of work at 8 am and I start work at 7.30 am and the last one leaves at 10 pm and I am on duty until 11 pm. Maybe someone has cheered up words or tips? In addition, I should submit an estimate, Mobile.de offer goes according to the Rehabearbeiter also, only the car is probably gone:-( mfg stefan

  • Er6n sound of pinion since chain change

    Good evening love community I had my chain changed for the first time before about 800km from my dealer of trust. The originals had 26500km on it. Now I am at almost 27400km and now have the following problem. From 400km with the new chain I suddenly had a very big noise from the region of Ritzel. I then also reported this to my dealer and I passed by him. The mechanic took the pinion and the chain down again, put everything together again, My dealer said that this is in the normal soundscape of an aftermarket chain and I don’t have to worry about it, because everything was set up optimally. I uploaded a private Youtube video, there you can hear the noise on a screwed-up motorcycle. It sounds like a hissing and the higher the aisle, the louder the noise gets. When driving it almost comes like an an ansau What do you think that could be? He said, if it gets louder he could order a pinion again, because it might be a factory error. I also read that the original pinion is rubberized and the aftermarket is no longer. I know a remote diagnosis is always difficult but maybe the one can help me maybe yet Video: https://www.youtube.com/watch?v=BMtqF7qBvT0 Thanks a lot in advance Gruss Fabio

  • Polishing the windshield – Autosol?!

    Hello, I want a 20 year old windshield, which is scratched and slightly milky again.. Could this possibly work with Autosol Metal Polish? Yes, I know that this polishing agent is intended for metal and that the disc is made of Plexiglas. So please no unnecessary answers. Maybe someone has tried it already. Autosol is just the only polish I have there. Do not want to spend a lot of money on polishing agents, because a new disc “only” 35€ Kos I would also like to hear more good tips.

  • ZX9R BJ 1996 Start-up problems

    Hello, I’m new here at the Kawaforum and I want to introduce myself briefly. I’m 62 years old and have been riding motorbikes since my 20th year of life. So far I had 16 different machines, mostly sports bikes, various manufacturers. Among them was a ZX9R BJ 1995 about 23 years ago, with which I was super satisfied at that time. Therefore I bought a ZX9R this year as a souvenir of “old” times, and that is a BJ 1996 in green/white. Is in an excellent condition with only 12000 km. There were no start problems during the purchase, and also not about 4 weeks ago at the TÜV. She wanted to start again a few days ago, but unfortunately she did not give any more mucks of herself. Thought of course immediately, battery is over. New bought and installed today, but unfortunately nothing again. I then dismantled the right handle unit, and see there, pressed on the button and jumped without any problems. Everything assembled again, started again for safety at least 10x, without problems. W Then it was time to take a short ride, but unfortunately only about 200 mtr came, and the engine went off and I can’t start it any more. So I ordered a new starter relay today, hoping to fix the problem. Incidentally, the starter can’t be, since the Kawa has already started today. If the relay doesn’t work, then I’m at the end of my Latin right now, because I’m not a motorcycle mechanic. Maybe someone has an idea, what the may be. Greetings Sigi

  • Front axle GPX 600 R, BJ.94

    Hello, I have a question. My name is Ralf and I have a problem with the front axle of my new ( old ) purchased Kawa. I have the following problem and wanted to ask if you can help me further. I added a GPX 600 R, year 94 last month and wanted to mount new tyres for the TÜV. I have a problem with the front tire now. When solving the mother of the axle I noticed that this mother was only wearing a warm hand !!! I have removed the front wheel, which The distance socket and the screw for the tacho are correctly installed. But if I try to tighten the axle with the counterscrew (after I tightened the axle with the counterscrew ) now to tighten the axle nut of the axle, I can no longer turn the front wheel. It is then bombs fixed. But if I only put on the nut with approx. 20 NM, the wheel can be turned clean again. Something jams there and I don’t know what. Do you happen to have an ide e ? It can’t be that the axe nut is only dressed so easily. It would have to have normally around 90 NM. Thank you in advance Greeting Ralf

  • Kawasaki GPZ 500S is no longer running around

    Hello Motortalker, after my first topic was accepted so well and I was also helped I would like to turn to you again and hope again that you can help me. Now on the actual topic….. I got the above mentioned motorcycle this year with 2 years Tüv and was overtaken or service was made, because I only started to ride motorcycle again (2 years break) I of course always rode gently, but I noticed after a short time, 1. if I on the I found a filter (dry) on the left side, the connections (diameter) are different large ??? 3. Today I removed the battery, get me a gel battery, I noticed the 2 hoses (open, a light and a black) are tank ventilation and ??? and then still a black hose that goes down from the tank , along the engine to the rear , I pulled it carefully and there was no resistance to feel and see there also an open hose (low pressure hose, overflow , ) ?????? I hope you can help me further , could not look now even today because it became dark and I lacked the time / family . LG meinerstermondeo PS . Start difficulties I also had lately and today ( after 2 weeks ) standing time she did not jump on .

  • Golf 6 kerb kissed and lean steering wheel

    Hello people I have the following problem I am on Saturday evening when turning in a parking lot against an island with a high standing curb (right front tire). I drove obliquely against the curb so that the tire turned almost to the right. Then I drove of course on and had to find out that the steering wheel is slightly to the right about 4-5 cm. I looked at the rim after a few meters times but there was nothing to see any scratches or Dell First I did some (idiotic tests:-D) as if the car was driving normally and braking without touching the steering wheel to the left or right which it did not do. Now I have the assumption that it is not the track that has turned but that what has been seriously broken and it has not been done with track adjustment. Now I just wanted to hear from you experts or from some of you who have already had the experience what can be broken before my father drives my car to the workshop. Hope you can help me Thanks already 🙂