Hello, I’ve been with my Peugeot Speedfight 3 LC for a little longer now. According to the vehicle license, this has 4.1kW and a top speed of approx. 70-75 km/h is therefore completely reduced. It is not tuned. However, I would like to change the belt and the Variomatic rollers. Now the question is which weight is most optimal. The scooter has its maximum power at approx. 7,300 rpm. Unfortunately, I don’t know what is currently installed for rollers, which is why I can’t take a reference. Now to the actual question, someone might know which Variomatik weight is best. I have to say that I have to overcome height differences of up to 400m. Lg
Author: 00c12f
-
Purchase advice Yamaha Neos BJ. 1999
Servus, first post, directly stupid question. I’m currently looking for a scooter. I came across the Yamaha Neos due to the durability that has been praised several times. Unfortunately, in my area there is only one offer:Yamaha Neos 50 According to the owner new battery, brake fluid new, air filter and spark plug new, carburetor cleaned, tires still good. One reads about the engines only good and the mileage is of course not much with 7000km. e: Are 680€ not too much for a vehicle over 20 years old or is the model just so good that it justifies the prices? Comparable prices can be found at least in other parts of Germany too. So I did not find much cheaper, except with a long list of defects. Thank you in advance.
-
The problem of saving the F1
So let’s face it… Single tires, no engine innovations over the years, no new technical innovations (e.g. mass dampers) and so on and so on… Do those who are in charge want to save the Formula 1??? Let’s face it, when a group goes into the F1, he doesn’t want to save money – but to prove himself as a car builder and advertise for himself… If the costs want to save, then not on the technology, but on the fuel…and not the drivers senselessly the fuel in the last Te This is pointless…but it belongs to it and the money is also thrown out of the window – THAT’S THE FORMEL 1!!! If you also have a comment/stimulation/criticism to cut off, then this belongs in here, so….[go on] Y.K.
-
Problem Air conditioning Evaporator temperature -40°
Hello My son-in-law was at the climate service because the system has not switched on, but refrigerant was still enough on it, so it can not be leaking there. But it doesn’t run, the workshop has read out and the evaporator temperature is at -40° . What’s wrong? The workshop thinks the evaporator is defective and should be new. Below is the protocol.
-
Harley Davidson Night Train Starter free run doesn’t spin.
Hi, everybody, I’m in despair with the beautiful Father’s Day weather. I’m driving a Night Train built in 2007. Yesterday after a break, she didn’t jump any more. The starter makes the noise as if the freewheel didn’t snap but just turns like that. So a buzz without cracks and stuff. Well, I thought, probably the starter broke. Since I had one at home, I started to unload the old starter and install the new laser. I tried to start to se Hether the new starter now turns the engine. Puster cake, everything was the same. Exactly the same sound. Now I thought that would be a little bit of the starter wreath in the engine. So primary lid down and look. But there was also everything ok. Then I took off the spark plugs and tried to start the engine. Then I saw that the freewheel is coming forward but not turning and thus also can not turn the engine. After the sound the starter spins off He. A very big help to you. 🙂
-
65ger Mustang start
Hello everybody, I’m new here and I bought my first vintage car yesterday. A mustang from 1965. I’m a complete beginner and I have to read in, but I have a question for you. The salesman explained to me how to start the engine. I feel that I’m doing something wrong, because the engine doesn’t start immediately. (It always works with him) Cold start: Set ignition, pass the accelerator once and let it come back up to half, then start. rmstart: Set ignition, kick the accelerator pedal up to half and then start. I always need 2-3 attempts until it starts … Do you have an idea? Thank you in advance!
-
Story – from one who wanted to learn to ride a motorcycle…
A friend finally wanted to make her driver’s license after a season as a socio. old enough for direct entry. However, completely unprejudiced (never mopped or driven before). So done, she registered in Eberswalde (Brandenburg) at the driving school. The girl is busy, learns theory, passed 0 error points. A little later the 125s was manageable, the 34hp machine came. 1. double hour drove on the practice site. Next double hour already She was afraid of the bend…! After 10min driving time what had to come came. With luck she missed the tree, with luck she is not down the slope. One can say, “can happen”. However, you could not have avoided. (she drove forward) She then fell more or less. Result leg broken. Now the story becomes interesting. The driving teacher drives her to the hospital and wants to get a note of The contents of the note should confirm to the driving instructor that the accident took place on the practice site. But what he did not have! The background is, the driving instructor has no insurance for the road (how far he has to take extra precautions I don’t know), only for the practice site. She is now sitting in a wheelchair (the break is not so bad, but 6 weeks outside of the fence). The police were at home, the advertisement was cancelled. The driving instructor wants to have paid the double hour. Later he still calls and asks if she has no more money. She can come to his home to provide “services” for money. What the driving instructor unfortunately had not considered, the telephone conversation would be received at the law firm and listened to by the lawyer’s assistant. Now we all hope that after the healing she still gets the courage to continue and not This will not be a credence of the driving instructors present here. But it simply served to free the soul. The procedure will probably take place only when it hopefully has its driver’s license in its pocket. So grass can not grow over the matter for a long time. —>A teacher’s answer to the insurance situation… Thank you
-
What can a harder chassis do?
When I had a soft chassis at that time, he swallowed floor waves and potholes without any problems. I have now equipped my VW Up with lowering springs and it drives much harder. If I now drive with the lowering springs over a pothole, is that already like the name already says, like a heavy blow. My question would be, could it stick away as well as with the standard springs or do I possibly break my springs, dampers thereby? Only the springs wu rden changed, the dampers are original and according to KÜS still in the border area.
-
Original Dodge Charger SRT8 Heckspoiler with ABE?
Ahoi! I had bought a rear spoiler for my Charger (2007) over ebay last year and pushed the assembly in front of me for financial reasons. Now I wanted to have it installed and found out that the ABE is missing. Google searches have revealed that you can send the documents about the manufacturer. Next problem: Workshop realized that the spoiler is not an original, and therefore has no numbers and so on. Ergo will we The ebay salesman unfortunately never answers and the 60-day deadline for an evaluation has of course elapsed for ages. Questions: -Can one still come to an ABE somehow or did I fire the 314,- € for free? – Since I am obviously too stupid to read and research, I also wanted to ask myself if someone here knows an online shop, the still original SRT 8-Heckspoiler offers and delivers an ABE immediately. I thank you many times in advance for any help.
-
Polishing machine for headlamps
Hello, the TÜV thinks that the headlight glasses of my car are too “blind”. Therefore I bought for the sake of simplicity and because there was no finer grinding paper than 1200er in the hardware store a refresher set with small pieces 2000er, 3000er and 5000er, polishing paste and sealer (naja). Since polishing takes some time and effort I thought about buying a used, cheap polishing machine, e.g. King Craft KCA 250, for small money. Jetz I have read here and elsewhere that these “simple” DIY and discounter devices are consistently considered unsuitable for polishing, and would like to ask for the technical reason: Why are these devices consistently so unfit and what technical criteria are they, by which one can recognize the basic suitability (speed, power, or … or … or). Do they at least do something for the “polishing” of headlight glasses? Mick