to the vehicle: C2 Bj 2008 Facelift 89400km 1.4 HDI to the error: at approx. 80 km/h on the highway the MKL went on and it appeared defective in the display exhaust system. ADAC introduced me and AGR valve in suspected. AGR valve cleaned everything together again and it starts turning but so fast again ignition turned out. Since then it no longer works. New AGR valve ordered and installed but it no longer starts. Error according to Lexia: fuel pressure sensor pos id Electric control valve Exhaust gas recirculation Lufmassmesser Coherence Intake air distributor may be some errors because I tried to start it in semi-built condition. Wanted to hear if someone knows what before I scrap it Since last year, he has only lost the fun of the once dearly gained C2.
Author: 00c12f
-
Workshop has installed false suspension spring
Hello, I had a spring break with my C3 Bj 2008. I still have a guarantee (yes, there is rarely a five-year-old car) at the workshop and they repaired the last week. Unfortunately I only found out that a) always had to change both springs and the workshop did not point out where we would have paid for the second installation of the spring. But the question was not in the room, and b) that I asked Citroen if this would have gone on kulanz and I have to bite into the sour apple and have the second spring installed and pay for it myself. That’s still limited. The real problem is now that I wanted to find out which spring the workshop has installed, so that the other workshop will install the same one now. I notice that one Spidan No. 55071 has been installed, which I don’t get displayed anywhere for the C3 and which for Renault Megane etc. Can I leave it that way and install the same spring on the other side, or what should I do in your opinion?? Is it rather unlikely that the other company would install the suspension spring that is not designed for the car, because of warranty ect. At this workshop where I bought the car, I absolutely don’t want to go, because their work seems to me really unsavory. What do you think?? lg Hansmiglück45
-
That’s where it’s cracked.
Hello everyone, yesterday I unfortunately crashed with my coupe. luckily the fault was not with me. now my question, how high the value of my coupe is appreciated. I assume that it is an economic total damage. fortunately nothing is broken on the engine, only headlights, a kotflügel, the engine hood. I want to have it repaired in any case. I love this car and would probably not find it again with this equipment in combination with this engine. so I can expect money from the insurance and how much will the reperature cost me? thanks already to all, greetings, burnz
-
DMAX Checker and his mechanic
What do you think about the show of the checkers on DMAX ? I’m curious about your opinions. My personal opinion: everything faked ! Especially “net” , because absolutely unbelievable I find this “overstamped mechanic” Lina . If it becomes a bit “demanding” e.g. modern radio installed in U.S.-Oldie or other are strangely always other men because then actually work . It builds at least a few wheels or changes a headlight . But always with pieksauberen , varnished (hardly bright red) fingernails and even cleaner hands. The prices he negotiates so and the people who always and always give in hugely – no I don’t believe !
-
The most beautiful Ateca pictures
Hello ATECA Fan`s , the first ones must be delivered … ???! Please put your first impressions and pictures in here …. many still have to wait .. mine will be built in the KW 50 and delivered in the KW 4-6 / 2017….
-
Is the alternator still enough?
Hi, since my power amplifier now has 700 instead of 400 watts of output power, the question arises for me whether the standard lighting machine (70A) is still sufficient. Does anyone know how much the standard electronics alone consume? Or can I not simply count the values together and compare them with the performance of Lima? Drive a b4(90PS) limo with standard equipment, i.e. neither air conditioning nor other electric snaps. Own only power steering and electric sliding roof.
-
Polishing rims with Abbeizer??
Now I wanted to polish my rims myself. Have tried this at an unobtrusive place and that works well. But I think that it really is a cramp to get the paint from the rim. Now my question: can I use paint Abbeizer for this?? If so, can you recommend one???? Are the lacquers on the rims mostly acrylic lacquers based on water??
-
Steering wheel crooked after tyre change?
Moin together. I had the tyre dealer change from winter to summer bikes on Saturday. Now the steering wheel is a bit crooked and I think it moves to the right. Before with the winter feet everything was OK. Dangers are not from the workshop with the car, I was standing next to it all the time. What can that be? Thanks for tips.
-
Two-stroke oil blend in diesel for Antara 2.2 CDI
Hello colleagues, I would have asked for your opinion about this. I drove for years an MB 3.2 CDI T. During this time, on recommendation in the forum, an “oil pad” was mixed by me in a ratio of 1:100 two-stroke oil to the diesel. So maybe there was no problem with the engine. What about the Antara engine 2.2? Would this be advisable here too?
-
Does anyone know this 9-3 convertible?
I’m still looking for the right car. This is especially attractive from the price, but too far away to just pass by. So if someone knows the car, or lives nearby and can look at it, I would of course be very grateful and would also show respectable. Greetings Marco9-3 SE Cabrio