MOTOR-TALK

Author: 00c12f

  • Real G – Adventure ( Ukraine 2015)

    Hello I have not presented myself on this forum so far. Owners of 2 G’s. 1.W461, Wolf from Denmark with several upgrades and 2.W463, 2.7 which gives me almost the same joy as the old one but rather problems In Poland also a GKlub works. With some colleagues we regularly drive to South-West of Ukraine, this time in the 2nd half of July 2015 I failed last year because of a breakdown (!), but I have a short film out of the ride in 2013. Vi If someone would like an OffRoad Pur, please get the feedback. We collect 6-8 cars, if there is still room, we invite (after the consideration of the appropriate equipment – MT tires, good technical condition, rope winch etc). low cost, with a tested local 4×4 guide incl. link:http://youtu.be/SY9yOOUg1Hs

  • G 350 Bluetec suitable for hunting and the future

    Moin, the cube is also such an old childhood love of mine. After my long-time hunting companion Defender was allowed to go, I thought I needed a G, but I am worried about durability, durability of the electronics and above all rust. On the other hand, I do not want to do without leather, heating and xenon (had I also retrofitted in the Defender). I have the possibility to take over a 2014 on good conditions, however, here I seem to be particularly concerned about the flaws. The difference is LR parts cost in relation to DB nix and the hours with the screwdriver half. If a G is only suitable for the ice cream parlour and Sylt and no longer suitable for mud and mud, then I fear that makes no sense. Also the electronics makes me worry, what about the whole stuff in 10-15 years ? Is there here users who use the current G species-appropriate ? So also in the dirt, possibly long stretch e from time to time trailers 3.5 t ? I am grateful for your opinions. LG Jens

  • Trafic 1.9dci has no power

    Hello, the problem is that my Trafic has no power. You have to drive it pretty high-touring at all that happens. If I switch to the fifth at 80 km/h and then accelerate it is like I’m driving with the handbrake tightened or having a big trailer on it. I just changed the timing belt, cylinder head and injectors. Before that, he didn’t take any gas in the first 10 seconds after starting and also didn’t really have power but more than now. d also no saved. Now don’t know any more and hope for your help and I am grateful for every tip. Mfg rema782

  • Master 2 spins only up to 1800 upm

    I changed the clutch with my Master 2 bj. 2008 with G9U650 engine and since then the engine does not turn higher than 1800 upm. After the assembly the engine did not want to start, so OT sensor new, all clear, engine starts. I noticed the speed problem during the test drive. Then I changed the LMM, no change. With my tester I can not get into the depths of the car so I brought the car to the Renault workshop. Except for a broken Brake light switches have found nothing. To safety have changed brake light switches and clutch switches, that car has no errors in the system anymore but the problem is still the same, until 1800 upm runs the car normal, no matter whether in the stationary gas or driving, you get to the 1800 the engine jerks like crazy, but does not go over the 1800. Let go of the gas, it runs normal again. Slowly I am really desperate. I have also thought, since I have the swings It’s a flywheel with 7 holes. I also hung out the wastegate and set it up by hand earlier, but that wasn’t the case.

  • Pender vehicle – 323 as reliable as 626?

    I am looking for a very reliable commuter car for about 120km a day. Since there is only a budget up to 3000,- available, I am interested in a Mazda 323 from the period from about 1998-2002. Are these cars comparable to the 626 from this time? Should one prefer or avoid a certain motorization? Any typical problems on the 323, which one should pay attention to when buying used cars? Thank you for your help!

  • Which oil 1.0 T-GDI ?

    Hello,. I have a small question. I have a car with 1.0 T-gdi engine. During the first technical inspection the oil was blown to 5W-30. In the operating instructions it says that this oil is not recommended for this engine..

  • who has experience with Kenda winter tires ??

    Hello, I’m getting ready for a 2008 rex RS450 as a second and winter scooter. Since the scooter is still on its original tires there is a change more than due and since the winter is at the door there are some with M+S identification. Purely priced are VeeRubber VRM351 ; Kenda K415 ; Kenda K701 and the somewhat stollier IRC UrbanSnow EVO interesting for me. Is there anyone who has already had his own experiences with them, event. also with several of the mentioned and nen real P can give opo-comparison?

  • Roller leaves after approx. 2 -300 meters

    Hello A colleague of mine has a problem there. He bought the part …. a (optical) beautiful 125′ scooter … Chinese design (grins) last year, and was also happy with the part, now the following happens….Roller starts well, but drives only a short distance (about 2 to 300 meters) and then goes out again. I know…. the error description is very poor, until not present. But does something happen to you anyway ? Greeting Helmut

  • Drive with snoring sound failed

    Moin together, I just lost my Pegasus P50 on the country road. Engine is running, but something seems to have broken at the drive. There was a snoring noise, drifting away. Then the snoring noise was gone, sounds now, as if the engine is running quite normally, nothing more at the drive. I can’t say more, just wait for the tow truck to bring the box home. I bought the part used, ran quite fast (so around the 65 k) m/h) without obvious structural changes. Guess it was “only” taken out the throttle. Do you already have an idea? I don’t have a lot of idea about rollers. Thank you and many greetings Olli

  • Is the original timing belt set from PSA

    The timing belt set( 1684448280) is changing and I thought , purchase original PSA set with water pump , want to drive the car even longer . Price was the slightly more expensive than contiset . Unfortunately I am somewhat unsure , which was delivered a set of Mopar ,GENUINE PARTS & ACCESSORIES . Not made in France , but made in Singapore . Number is identical . Hmm , is that so since the takeover ? Has anyone already gained experience ?