Hello together, I’m still looking for the matching W221 and couldn’t wait this weekend to get me to “bridge” a Sixt S class. Usually you get there always the short 350s mostly in silver. So I thought that too, but nothing was i got a black long version as 350s. But I have to say to the short the difference is also visually noticeable, although it is only 10 cm. Is maybe a bad thing but I always have the stuff I feel like I would drive a strechlimo, so for me it would definitely be nothing. I also have the feeling that pulls with the 350-long net as good as short, maybe related to the weight. Is it just me that the car is not so gaaaar to me or is the long version really necessary. Greetings Marc
Author: 00c12f
-
Hello and introduce
Hello wanted to introduce me once, am new here. Come from Berlin and drive an Omega B Car. 2,5 V6 which I have provided with a 3l engine with the I 500 waves of the Vectra B, have to add a group,A from Basturk completely under!! Heads were also made! Yes beatel still around now the chassis is on!! He also has a few airbrush my silverling, some Berliners will have seen him before. So enough!!!!! now to me, Bin der Dirk 35 years old and like to basel at the ommi work in the Bauha us and have wife and child!!! I say hello now to everyone!!!! Greetings Dirk
-
FFH lock module from Ebay who had such a thing before?
Hi there are at Ebay these modules that run up the windows when closing…. Don’t cost the worldhttp://cgi.ebay.de/…/190497203534?… Has any of you ever installed such a thing ? or collected ejections ? Have an Audi 80 B3 with original E-window lifters at the front, but without continous control …. Mfg
-
Mazda 3 sell and buy Mazda MX-5 RF
Hello! I am 21 years old and bought my first car a year ago, a Mazda 3 for approx. 12,000 euros. Year of construction 2014, the km stand has since risen from approx. 60k to 64k. I earn quite well and have hardly enjoyed anything so far. I now consider selling the Mazda 3 and buying instead an MX-5 RF. I will probably move in October and then drive significantly more. (roughly 10-20k km) I would buy the RF version, as I will buy the Blechdac h is much more beautiful than the fabric version. I would probably keep the car for 4 years, then possibly sell it again. Since I have had good experience with the 3s I would like to buy the car again via the Mazda stock exchange at a Mazda dealer. Another dealer would be fine, private purchase is not really possible for me. I have some unexplained questions in my mind and hope that I can be helped here: 1. Is the MX-5 RF also for further routes (15 0-200km) and pleasant in winter? 2. How much is my Mazda 3 now worth? The used car prices have risen last year as far as I know, I have not found a comparable vehicle for 12000 euros. However, I would sell as a private person – with what amount can I realistically calculate? 3. Prices for the MX-5 are already significantly different – There are models for 22k, 25k, 30k etc. – Which price range is here of the price/performance ratio and related resaleswe rt most meaningful? With my 3s I had hardly any problems and Mazda seems to be generally durable. As long as the car is in good condition I actually have nothing against a slightly older one, but if it is useful I could also spend more money on a newer/newer one. 4. What do I have to consider with the equipment? What differences are there here and what is (not) worth? 5. 2022 there was a facelift – Does that have any relevance for me? The design looks a little better but I don’t think this alone is worth the difference in price. Edit: 6. Is the 132hp version enough or should you take the 184hp version?
-
NBFL doesn’t start anymore
My NBFL bj 2001, 1.6er doesn’t want to start anymore? I had a very weak battery and then my mx5 was standing for 3 weeks without moving, I thought it was due to a blank battery and then called the ADAC, battery was connected to starter set and still the engine did not start, error code was read out and it should be the immobiliser? I tried it with a second key then and it still doesn’t start. Starter works and motor turns Now the question is whether it could really be the electronic immobilizer or if it has another cause ? is this a known problem with mx5? I have read that it might also be on the camshaft sensor, maybe I would buy and replace a used sensor. I hope you still have some tips for me.
-
Damage caused by too high mounting air pressure on car tires?
Hello, I hope someone can help me. I ordered new tires last week and had them mounted on my aluminium rims by a tyre dealer (workshop). I picked up the tires there and then mounted them on my vehicle myself and wanted to adjust the air pressure to 2.5 bar. I noticed that all the tyres were pumped up to a pressure of 5.5 to 6.5 bar. In order to get the tire on the rim, a higher mounting air pressure is required. Now I have read on the internet that the jumping pressure can be max. 3.3 bar and the max. setting pressure 4 bar, as otherwise there can be damage to the tyre or especially to the tyre bump. If the jump or the correct press seat cannot be reached with these pressures, the assembly process has to be repeated from the front. Now my question: Can the too high mounting air pressure have damaged the tyres? The tyres are Ra insport 3 from UniRoyal (225/40 R18 92Y XL with rim rib summer tire). On the tires is a maximum air pressure of 40 PSI, i.e. approx. 2.76 bar. Even if you can take 150 % of this value as a maximum mounting air pressure, then that would be only 4,14 bar. Now my guess is that the tyre assembly was executed improperly. Maybe no lubricant was used and so it was only possible with a very high pressure that the tires “set” or wi I didn’t see any residue of a lubricant on the tires at the rim of the rim. Since I drive a lot of highways and often speeds over 200 km/h, my worry is that the high pressure has not visibly damaged the tires and it could come to a tyre pitcher at some point. If someone knows it it would be nice to write whether there is a danger or the worry is unfounded. Thank you in advance for answers.
-
Tires cheap???
Hello to all tire experts I have received a set of aluminium wheels for the golf from my partner in the dimensions 7×17….According to the report I should drive tires in the dimensions 205/45 R17…I also want to be quite honest, so the car is only a 1.6l Golf 4 variant which is used as a everyday car. according to Recherge in the net there is indeed a mad price spread – starting from the cheap tire which should cost 50€ to brand tires 160€ pcs…. since I am a miser, and I mean that (woman at the wheel) every expensive tire would be too bad to drive against the curb – should it also make a cheaper tire. Of course it should not necessarily lack safety now! but whether the rubber looks a little louder or the profile looks so beautiful I don’t really care….Can someone recommend me a cheap tire, which I can buy with a good conscience? thank you already for reading
-
Omega B fuse engine compartment/burns always through
Hello guys, following problem, Omega 2.5 TD Built 01/95, 30 A fuse in the engine compartment Burns always through see photo know someone what a fuse this is, and why does it always burn through, green relay I have already replaced. Thank you!
-
Hardtop for Audi 80 – which one is original?
Hello all, in Ebay 2 hardtops are currently being auctioned. Both claim that this is the original Audi hardtop, but they look a bit different. Can one of you have the hardtop in your possession look inside the two auctions and tell me which one is really the original one.http://cgi.ebay.de/…heatable_W0QQitemZ260295138929QQcmdZViewItem?…http://cgi.ebay.de/…992-2000_W0QitemZ110296350634QcmdZViewItem?… Thank you all in advance. Gr uß Jürgen
-
Box connection
Hello I have a question and indeed a friend has an Audi 80 b3 type 89. Now the question is he has connections at the rear of the hat rack for LS? I haven’t seen the car yet. Should new radio and the LS be installed. Yes also woman can! *g* Would be nice if anyone can help me. and then she also has a gamma radio in it, wants to exchange it for a Sony only unfortunately it is so that the iso plugs do not fit. Does anyone have any idea what the plug should look like? lg jenny