Moin, we have an Omega and a Vectra. On both vehicles a blue-point radio was already installed when buying. If you turn on the radio, then the date display is off in the on-board display. Is there any remedy for this? Greetings WH
Author: 00c12f
-
Interior decor
Tag. knows of you by chance someone a provider for interior decor opel omega B ??? I want to separate myself from my aluminum look only I just find no shop in the internet many thanks already greetings
-
Automatic gearbox / suspension operation
Hello together, as an automatic transmission Laie I have a few questions: How is that actually, with automatic with heavy trailer. Will the slip then so big that the car eats a lot of fuel more??? Can one give with boat on a slip system simply uninhibited gas?? (now I have to compensate the 16V hole with the squamming clutch) So, is automatic with trailer operation better or worse??? Greeting Werner
-
Track rod
Hallöchen was in despair again today. wanted to change my track rods unfortunately did not get it. I am not just clumsy with the hands but the steering drive-side head just wanted to go down. the head on the bike,,, a few hits and outside he was. then I built everything together again and am in construction market a puller buy. but also with it was nothing to do. does someone of you have a trick in stock as I get the part? does crooked oil bring something? ? and for a puller was also somehow not enough space to put on. also no place to hammer. I thanks to you already, is also quite penetrated because my wheel to the right shakes already wien lambtail because the head is so knocked out
-
Farewell for 540i Touring
Hello dear forum, we were only a short year member but always felt optimal at home in this great forum. Our sincere thanks for all the help provided. Actually we wanted to buy another Omega. A great Omega B 3,2 Caravan was already found. Since this from my point of view was a bit too expensive at the dealer, I looked around at other car dealerships and then it happened: A 2003 BMW 540i Touring with perfect legend s The BMW has full equipment. From 16:9 Navi to seat memory to stand-up heating and co. In addition from 1st hand and completely maintained with BMW staple. Tomorrow we still go to the used car examination and if there is nothing negative, we take it with us. The BMW is certainly more expensive in maintenance than a 3.2 Omega but that’s worth it to me. Our grandmother is right in the eye. It’s still a funny feeling, because despite the many repairs that could not be left out at 724000 km, the grandma was a good companion. Well, hope that I get between 1500-2000 euros, because a few weeks ago only 1400 euros were invested in Reps. Ciao Matze PS.: I will nevertheless follow various threads as passive mitgleid.
-
Hit the rim.
Hello all, today my wife’s FoFi was the turn to be cleaned. He’s clean but he’s made a terrifying discovery The rim at the front of the driver’s side has got a clear blow. Cracks of rim or tires were not visible with the naked eye. Woman was not aware of this, but the cause is assumed to be a violent pothole from last week. I looked sensitively for vibrations or the same during the ride, but Go I have the following questions: – Is this a security risk? – Can something like this be repaired? (perhaps allowed?) – If YES, what would be the fun of me? MFG
-
Valves 2.6E V6 ABC
Yes Hello to all V6 drivers and of course all other Audi drivers. 🙂 I have in small problem that in the training run at 850 rpm and only when the engine is running warm my Ventiele clackers oil pressure is available enough 2.8 bar in the training run as soon as the speed is raised to 1000 rpm it is a little quieter but still available. I tried all possible oils from 0W-40 to 15W-40 with VW Audi standard of course. I also made the hydro-punch all new. n suspects about the thing that I can hardly imagine…. is that the camshafts have gone so far that the hydropumps can no longer make up for the game because yes the guide sleeve at the bottom of the hydropump is only up to a conscience measure with me it comes out about 1.5 mm through the oil pressure and thus the game compensates. and if this becomes too big it does not manage and it clacks. with a mechanical one can set it with adjust screw or insert Blättchen etc. someone already had such a problem or is there the possibility that these have entered or is there a measuring procedure for this engine? for wear limit of cams etc? with diesel engines there should be also such problems???? thank you in advance 🙂
-
Change engine control unit – simple thing?
As it looks, some of the small but annoying problems on my vehicle are based on a defective motor control unit. Now my questions: 1. Is the cruise control part of the motor control unit? 2. Are the control units always the same for the same engines or are there differences between the manual/automatic transmission, B4 or C4…? 3. Can you just connect a new control unit and start driving… or do you have to adjust/program something? Thank you
-
Min Consumption SLK 350
Hello forum, of course you don’t look at the consumption at a SLK 350. Last week I was forced to drive a little slower in terms of weather. 7.9 liters were the result in the meantime. On the front door there were 8.1l. Has anyone done less?