MOTOR-TALK

Author: 00c12f

  • Madison 125

    Hello to each other I have the opportunity to buy a Madison 125 scooter has about 7800 km down and 12 ps Question what would be a realistic price which probs might already appear in the mileage? About numerous answers I would be very happy Roller is for my daughter and would have to be throttled from 100 to 80, too? Or other option a new KEEWAY for about 1250€ has but only 8 or 9 HP Thanks already in advance for your answers Thominat or

  • Gas giving after thrust operation – bang

    Hello, I bought myself a new Zontes G1 last week. It has now 170 km on it. I have one thing that seems strange to me. If I want to let my wheels roll in thrust mode, so no gas at all and connect to it, I have a short moment where there is no real drift and then there is a bang. This can be imagined so that at this moment there is only a force close between the engine and gearbox or drive. I can turn the throttle lever with a lot of feeling. Is such a behavior normal for a 125er? Of course I Googled a bit and looked at the chain at the same time. I think this is very loose. If I touch it in the middle place, I can almost push it to the swing. I drive to the dealer tomorrow, but would like to know from you what you mean about it before he tells me about the horse tomorrow.

  • Aprilia Atlantic 125 too slow

    Hello, after a very long two wheel abstinence I bought a used Aprilia Atlantic 125 some time ago. This runs so well. Up to 70 I find the suit for such a thick ship already ok. 70-90 it becomes tougher then. Tacho 100 I can only manage with gradients. So far I have done the following: – new straps – new Vario weights (7.3g , original it is probably 7.4g) there are traces in the careers of the weights but no edges or straps – clutch and converter c The GDF has plenty of tension in any case, I had bought a complete converter/coupling group as a replacement, but this does not fit why. If this is installed the scooter does not start. I have already built 3 times back and forth, but with the replacement unit of 101octane the scooter does not run. But I get the converter slightly more easily apart than with my installed one. – Membrane on the carburettor, also here is nothing noticeable like cracks or similar – Compression measured, 9.5bar (BTW the symmy of my wife has “only 8.5bar” – air filter is also ok – spark plug is new and after longer lap also rehbraun. I can therefore exclude false air, even fogs with brake cleaner did not change the speed Slowly I am at a loss, maybe someone still has a tip for me. Thought it was also due to the driver weight, but the Sym Joyride Evo my wife I drive in the level with speedometer 110, also the passage from 70kmh is clearly better. U nd the sym is only 10kg lighter than the Atlantic and has 2.5hp less.

  • Uncertain About Expiration Sale and Repurchase

    Hello dear MTler, I am unsure about the correct procedure and therefore I ask you to check whether this is all right. I want to sell my car privately and then buy a new used car from the dealer. Special feature: The buyer of my car comes from the Netherlands, the car is still registered to me. Here the planned procedure: 1) He will come to me on Monday morning and look at the car. 2) Afterwards we drive to the local dealer (Der den W 3) Then we drive to my bank, make the contract, he makes a lightning transfer, the bank confirms this to me. 4) We drive together to the car registration office, there my car is logged off 5) We apply for KZK for it, for this we need a short-term eVB with green card, right? Is there a better variant than this on the internet on the relevant pages, which you find so if you “kur” zzeit evb” googelt? 6) Let KZK be minted, back to the registration office for stamps, ready? Now the difficulty of the “new purchase”, which I prefer to do on the same day. I do a test drive on Friday with my (hopefully) future. Of course I don’t want to sign the purchase contract before Monday is all in dry cloths. Is there a variant? e.g. a withdrawal clause until Monday evening? So would the dealer possibly get involved? g I can then make out directly with my house bank again, or I let the bank give me the money in bar and then take it with me. Or is there a better variant? The dealer will hardly give me the letter before I have paid the car completely, and without a letter I can not allow the car. In short: When selling I am quite sure, but how the best procedure is when buying, so that I have the new one right at home on Monday, I am still unsure and please good suggestions. VG and thank you in advance!

  • How do I make the best of an almost safe accident?

    Hi people… did you ever ask me, who has been busy for a long time… it can always be that an accommodating motorist does not notice one of us and cuts at the turn over our track… when I see that he will meet me… what do I do best??? I just try to delay and evade as well… when he stands at 90° on my roadway, do you think it is possible to jump off or even over the hood or over it? It is now adventurous, I know, and it is probably unpredictable that at such a moment you leave your motorcycle in the stab, but what do most people do? except the front wheel overbrake… MFG lupaxy

  • cheap shops, are there hooks?

    I’m looking for a puffpot for my möpped. price comparisons on the internet sometimes revealed significant price differences. no problem, I buy at the best. only I thought about it because the official importer on his page warned against counterfeiting and inferior goods and the manufacturer even coined comparison codes in the exhaust. so prefer to pay a few hundred more and be on the safe side?

  • ….Reconstructed using vn used parts, meaning

    Moin, have bought me a used R1, when reviewing the papers much to me, of course, only at home ;( this pass in the registration certificate…. If I interpret correctly that means that the machine had a total damage, was deregistered and then repaired again to register it again? Can this also be a machine shut down by the police, where possibly illegal parts were replaced by used ones? How about replacement motos? r, could that be meant by that? Too bad, really thought that I had thought of everything………… but only the admission decision part II looked at the letter very carefully I Depp!! MfG

  • 7-seaters urgently sought 🙁

    Hello, I need a purchase advice, after we had Easter an unindebted car accident with total damage (and personal damage ) with our Zafira… We don’t have much time anymore, because the rental car is only placed until 16.4.. According to the report, the Zafira is still worth about 4600 euros (180000 km, diesel, not yet a particle filter), we currently can only lay down little, since we have bought for my husband (long distance commuter) first a quite new small car… Now we have un Our criteria are: to have a diesel (about 25000 km/year, a lot of motorway) – with particulate filter, under 200000 km, 7 seats (preferably single seats), we have found the following so far: a Mazda 5 (my favorite because of the sliding doors, TÜV/AU would make the dealer with me at the Dekra) http://www.autoscout24.de/Details.aspx?… a Peugeot 307 (there should be made new TÜV/AU plus at least new tyres)http:// search.mobile.de/…/174492371.html a Fiat Doblo (with me the 85 hp seem a bit micky…)http://suche.mobile.de/…/176858589.html tja…and then again call a Zafira from our district:http://suche.mobile.de/…/175734518.html Can you give me a little pusher in the right direction? I’m a bit perplexed…the time is pressing and I hardly know what to take now… Thanks for your help!

  • Set Valves

    Hello together, I wanted to hear your opinion on the topic. I had the valves set last week at my Er6n at 32000 km although Kawa says that it is only necessary at 42000. So according to my screwdriver it was urgently necessary. He also said that he was surprised that according to the maintenance wall it is not necessary until after 42tkm. Have you already had experience?

  • SB handlebars at GPZ600R

    Hello friends, I would like to know if the mounting of an SB handlebar to a GPZ600R inevitably involves a change in the front panel and what the brake line looks like? If I should convert to steel flex, the supply line from the pump to the distributor is always long enough, or must an extra longer line be ordered. Can I order the feed line separately?