Hello Leuts, after my last attempt to buy a nighttrain failed, here a new one. Have an interesting offer from a German dealer (i.e. with warranty) over a 2001 FXDL available, can only run 5tkm, TC88, carburetor model, original condition except for installed Screaming Eagles. Offer sounds quite good overall, however, this Low Rider originates from the island. Do I have to pay attention to something special during the approval??? machine should be approved for D, TÜV/AU available until 2011. Are there special features on the model of the 2001 low rider, such as childhood diseases or similar???? Thank you in advance for your tips and experiences!
Category: Harley Davidson Forum
-
Pulley-Brems combination
moin, am just back from America and now looking for the most useful solution to get both (pulley and brake) on one side, so that the rear wheel also comes to justice properly. since I can’t decide without having weighed everything I ask here just after your opinion: there is a system of GMA (unfortunately without pictures on their side)http://www.chopperscycle.com/page/VTS/PROD/36-142/11793 where the brake disc is integrated into the pulley. know there jema and the price and what interests me more, does the system work??? the second system is of DNA and calls itself brakesterhttp://www.trydna.com/BRAKESTER.html clearly cheaper, but qualitatively very differently rated?? also I slow down there on the pullyrand and heat that of course! can anyone say anything? the third found in the catalog is of HHIhttp://www.hawkhalters.com/drive-side-brake.html same system as GMA I would say, does anyone know that? and the last one found comes from RC Componentshttp://www.rccomponents.com/harleyproducts/harpulleyrotors.aspx with a lot of decors, but otherwise?????? of course there are Ricks, but I don’t give 3500,-€ for that, so I didn’t mention it. so now you, what do you think about it and what would you deny? or someone else knows another system at the pulley and brake on one side so that you can see the bike well? shop connection to daytona I have, 10-15% discount on the normal price also includes porto and a German contact partner. so that is already clear. only what is recommended? 70 zene, 3/4″ axis, 1 1/8 belt, softail 2001 gruss and thanks ff
-
!!!!!!!!!!!! that can’t be true!!!!!!!!!!!!
I took my Harlay out of the trailer today and put her on sidewalk and took her away. In the intertwining time the police came and had once again nothing better to do than to look for a few faults. And look since after nothing was found the good man saw that I had no cat nose at the back. on that they wrote an ad although the box was off and I did not drive. he meant to me 150 euros and 3 points give that!!!!!!!!!!!! now the question: d can they write an ad even though it is absent and stood on the sidewalk and did not hinder anyone?????? Ask for answer… Greetings harald live our police
-
Hamburger Harley Days – Location moved
The location in the free port is not usable for the Harley Days due to objections of the German Customs. Long live the German bureaucratism!!! On request at the organizer this was confirmed. The event will take place in the vicinity of the HSV / HSH Nordbank in the Sylvester Allee. Negotiations about the site are ongoing and are expected to be concluded and officially confirmed next week. Harley Days Hamburg will be informed by Ve This is the only way to get to know LG Horbz.
-
Starter spins and spins….
Hello! Today we wanted to start a cozy Easter exit, my girlfriend has extra fetched her board, both in full adjustment-I start-the starter rotates and does not stop turning off, kill switch, nothing has used. The thing has already smoked like a main student at the toilet, as if the whole place would burn down immediately-you only notice how long such a battery holds off Naja, then pick out keys, remove side pockets-until one with an excavator to the B In any case, I was already a bit hectic, since the thing was smoking and smelling more and more and surrendered like an amok-running transformer – I finally managed to clamp down the minus cable and the spook was over. OK. Ratlessness. What happened there? Anyway, I was just in the garage again, wanted to disassemble the starter and let the part be on for the test – it was immediately there and ran as if nothing had happened. Please to s relevant clues which phenomenon I have experienced here – I have no idea what was going on. THANK YOU Sunny Burner
-
Controllers
Hello together, I need your help. With my 98 evo the battery is no longer charged.I measure with running engine only about 12 volts.We probably only be the batt. voltage.The Lima brings still full power. I checked, as described here in the forum, the regulator. All normally connected ignition one, cable pulled from the regulator at the Lima and measured the two poles against mass. As far as so good, now I used instead of the test lamp a voltmeter.In the description stands If the test lamp lights up at one of the poles, the controller is in the ass. My voltmeter now shows about 1.5 volts at both poles.Whether ignition on or off. Is the controller now through or not? Thank you in advance Greeting Raz
-
Manufacturer Stator alternator Evo
Hello, now the Lima Stator is dead. Evo Softail Bj. 94. I would take the “simple” original set of W&W. Does anyone have experience with the quality… Can you build it?https://www.wwag.com/en/…t-vergaser-dyna-1991-1998-softail-1989-1999 Greetings Thomas
-
Rear brake light switch
Hello friends With me the two cables, which are connected directly to the brake light switch, are both 12V attached, this is so right. The brake light shines permanently. This is not my machine, I should only put into chaos again, I do not show the harness to you. Harley-Davidson XLH 883 Bj. 1991
-
Leather jackets
Hi together I’m looking for a reasonable leather jacket (not Harley, Belstaff or cheap chopper jackets by louis, Polo, Heingericke) I’m bothered even if the name of the manufacturer RIESENGROSS is on the back! Fox creek in USA e.g. make beautiful jackets, but unfortunately did not find any European sales, and without fitting is just a risk! Can someone give me a tip! Thanks and many greetings, Frank
-
Conversion ready for this winter
So, the remodeling on my Sporty is ready for this winter. It was replaced: the rear fender, the seat, the handlebars, as well as the turn signals. In addition, a little cosmetic was made. It should go towards Boober-Old School-style. I like it so much.