Category: LKW, Nutzfahrzeuge & Anhänger Forum

Hi, yesterday we bought a new Iveco 80E22 with loader crane. He has a radio preparation but on the Iso plugs there is no power on it when the ignition is on. I read in the operating instructions that a current converter (24/12) is built-in and the safety for this converter is in the battery box. I checked the safety in the battery box everything I. O. (is ne 10A safety large) in the safety box (glove compartment) is the mini fuse also I. O. why is t no current on the Iso plug??? Boxing were also not inside only the cables for it and the antenna cable is already inside but I find the antenna for it where can it be stuck??? Please for HELP

Hello, I have the following problems. My buddy bought an ATEGO 815. Unfortunately, the seat (ISRI) is somehow defective. It is in the lower position without the air bellows. He does not react to the keystrokes (on / off etc..). At the Stg. the green LED lights up After the plugging of the red ECU sounds the summer and in the display I think SIL or something.. Who can help me with the troubleshooting or. how do I go on? Unfortunately I also have a schematic icht to measure anything. Poti from the seat etc.. Add a few photos including the vehicle registration with the type of truck If more photos are needed and / or descriptions I like to create them.

Moin, short history so that you know what it’s about. Get next year a new tractor and a new grain tipping machine which is already configured according to my ideas and is ordered like this. On Monday there was now a representative for the SZM (brand doesn’t matter for now ) who meant the 130 liter hydraulic oil is enough. I think that this will be a bit “eng” because it is also a pushing ground that is also used. Is there ~200 liters the better choice because of the warming because more oil = less warming or? What does it look like with high pressure and low pressure systems there is something specific? I float in front of a system with encoder device (besides the driver’s seat lifting and lowering) and remote control.

Hi Dear Colleagues, We are expanding our small company with a new stand, namely an Actros 1841 with loading crane (Atlas 120.3 E with gripper) threaded with a 3 axles low loader. This is used in road construction e.g. to set up and clean up construction sites and what else is included. The car with low loader is already on the yard, stop chains for the low loader are also available (in this area I have years of professional experience), however, it is now about the law the crane has not yet arrived and cannot be mounted. In any case, the previous model is given with a lifting force of 3.4 t at the first and 1.7 t at the end of the 2 excitation. Of course, the gripper has to be removed from it. I thought of a 3t 4 frame with 2.5 m with shortening hook for tool containers and similar, and a single hanger with one meter (also 3 t) e.g. for Rittelp Unfortunately, all this is only advised, since I have never had to deal with loading cranes, I rather come from the excavator guide area. Anyway, I would be very happy if someone is driving something similar (or driven) here, which can give me some practical tips so that we don’t get the wrong one, or overlook something important. Because if the transition is done then, it should of course run as professionally as possible. As far as my questions, I think that is right here. someone finds something like that, or has had it in his fingers. Thank you in advance, Mez!

Hello, maybe someone can help me ?!?! And I am accused in 8 cases that I drove with my truck with disk and someone else at the same time someone with my driver card has driven on another truck. But did not notice that my driver card is missing. Where I left the company I first noticed that it was gone and have filed a complaint. Does someone know what to expect for a penalty, although I did not give anyone the card?!? Di e must have taken someone. Zap Sarap… Thank you in advance for your contributions

Hello, my question is: would like to transport goods with a 40 t train for other companies, only unfortunately I do not have an EU license myself. I have made contact with a company xxx today and I can use this EU LICENZ from the company xxx if I join the company as a silent partner with a contribution of 240€(EU LICENZ USE) per year have no influence on the management, termination within 5 days. IS THE ALL RIGHT ???

Hello together … had a conversation yesterday evening with a driver from a 7.5 to. He drives independently and has two driver cards. His statement, earlier he could drive his 1st and 2nd tour with a disc, nowadays he has two cards. On my question, how this should be done; the device records all KM on etc. came the following statement: The vehicle is placed by the forwarding company. He only offers his man power. For the 1st tour, card No. 1 comes in – afternoon to reload 1. Ka ran out – 2nd card in. Supposedly no problems ??? May/Should I believe that? LG

Hej kolegas, with us in the workshop we rest since the newest truck`s with the diesel gas systems of the company ———- after. Even though LPG is blown in in the intake still before ́m turbocharger. Because the gas is first directed from the 2 additional gas tanks to the evaporator and brought into the gas-foermigen condition. {20%Gas, 80%Diesel} Do you have experience with such gas systems, do they damage the engine after maybe 250,000.00 km or more? Gas in this system acts as a kind of nitro in the engine, at Lead feet and hot engines can go wrong, can’t they? Have you already been repaired due to the system?

Hello, I am currently 27 and unemployed… so my problem already starts. I found a great company and where I also completed an internship but now I lack the C1E Fühererschein + ARD Schein to be accepted, because I found the job on the side of the agency for work I thought I would finance the job center, but wrong thought, they have a cousin the Linenbus driver’s license for 10,000€(has worked only 2months then quit) financial I even have a written commitment that I will be put in full time, but it doesn’t help anything, so I have to finance my own driving license from my little money. Do you have a question where I can make this fastest or cheapest in Hamburg or the surrounding area? Would I be happy if you had suggestions like I could enforce my will at the job center. Thanks in advance

Hello community my father-in-law was stopped with the truck, the officials found that the card was overdue to read out. They told him that the sentence was based on the 12 prints missing. Now we have no idea what is coming to him! I have been looking for something on the Internet and could only find something if you drive without a card that would be 250€ per day!!! Does that apply? Does he have to turn 3000 now? Thank you in advance.