Category: Car Audio & Navigation Forum

as far as clear, however, is still open to me with how much power I should operate the whole. (clearly only so much that it does not consume) but purely theoretically the system runs normally with 2*100wrms, I then need in biamping mode 4×50, bitsl reserve 4×60 ? or as I assume 4×100, since the speakers each need the 100wrms on their frequency band.? possibly also for the theory 4×90. gruss

Hello, so I have already installed the following: 2 x bridge K2.02 1 x Optima Red Top as an add-onbat. Audio System HX 165 SQ as a front system Well the problem I find somehow not the right woofer for me. Belonged to the following Woofer : Audio System CX 12 BR : I don’t like it any more. I used to not feel bad but unfortunately not right about it. Audio System Xion 12 Plus BR: Was really surprised compared to the old Xion are worlds in my opinion. ig. quite well liked, but for trance absolutely not suitable. Rather a Hop Hop Woofer. MTX 7512 SLH: I liked it very much for a while, but I had some little steam. I find the pressure can keep up with the Xion net. Hm now the question is what would fit well with the bridge? Would like to drive on 2 ohms. I wouldn’t want to sacrifice a lot of space either. Let’s say a maximum of 85 l around. Probably 2 x 12″. The price is irrelevant quality has its price. MF G Alex

Hello guys, So after my new sub is so slow, I thought of shooting some photos from the whole system. So front: Scan Speak in aluminum balls. You look —> http://img140.imageshack.us/img140/8905/img2113small4bn.jpg TMT: Eton A popel 1:http://img72.imageshack.us/img72/3561/img2116small9qq.jpg (Here I still lack a cover as can be seen.) was set almost perfectly to my needs by a flyway measurement So and now comes My little one. carpower Sonic at 2,5 KW : So if you don’t know the Sonic, you’re looking like the DD 9915, you’re looking like the DD 9915 fast here http://img140.imageshack.us/img140/691/img2117small2cy.jpghttp://img85.imageshack.us/img85/1741/img2118small8ui.jpg So what should I tell you. I don’t draw a comparison to the W7, because you can’t compare both. One plays nice (W7) , fat, etc. The other (DD) sounds so dry, fast, deep is just brutal. Probably the most brutal sub in the world. I don’t think it’s a SPL woofer. To be honest, it sounds different from any other sub. It’s not comparable to any other sub in any way of playing. In principle, this is what he’s playing almost every sub “somehow” on the wall. Oh, Leutz, if I want to give up within (which I certainly don’t go out of) 6 months, I give the DD away and give the hobby on A. Isn’t hehe

Hello! — I recently installed a power amplifier in my car. It was cheap but it works perfectly as far as I can judge. It gets power directly from the battery (plus and minus) via 2x 4mm2. — If I connect to the power amplifier car radio or my CD player or laptop and the external signal source is powered by a battery of my own then I have everything perfectly clean without any interference. — Problem: However, if I practice the CD player or laptop I’ll get funny cracks out of the speakers. These will definitely come from the respective voltage converter because, for example, I have cracks in the speaker when accessing the hard disk from the laptop. — It’s not up to the crowd! I first thought it was due to the crowd. After I connected the cigarette lighter mass contact to the mass cable of the power stage and the problem still existed I can get a mass How can I eliminate these noises? — Would it be enough to connect a capacitor parallel to the cigarette lighter? If so, how big would the capacity be? Thanks! cu

Hello! What criteria should an amplifier that is only for a bass meet? So which connections should you consider if you want to buy these things? Are there maybe small 2-channel devices that you can use for it? I don’t want to spend more money than necessary. A pure city driver doesn’t buy a Porsche either, unless he can afford it… Thanks in advance, because I don’t have a plan and I don’t want to complain about dumpbacks with dangerous half-knowledge. I’ve already read enough about this, which sounds quite plausible to someone without any idea, but in truth is total bullshit.

Hello, I have installed the Pioneer DEH – P88RS in my Passat 3b. In between there is such a phantom feed. Unfortunately the reception is not good. The station search does not find a transmitter. If I manually set up a strong transmitter the reception is bearable, but not good. I tried it without a taptom feed, it is not much different, it feels a little worse. Before such a VW radio was in there, the reception was better. What can this be about? What can you do? Greetings

Moinmoin, have the following problem, my As 500 has dissolved into steam. I just took them apart and caught them, that all 75333P Mosfet ́s have smoked. Did someone ever have such a thing??? I wonder now, if it brings the 8 Moseft ́s exchange or if that comes somewhere else, problem is that I don ́t have a schematic. Can someone tell me now if all of them hang in row or how that is built up??? The Elkos and coils all still look quite in Or dnung out, as I see it (only with the eyes, unfortunately can not measure here) There are 16 33N10 Mosfets installed, each in groups of 4, I assume that the 2 groups are for a channel, but these still look healthy, (sSchtkontrolle) Do you mean that the 75333P can just use ALL at once and then only those are broken or do I still have a problem in the power supply?? the 75333P cost per st. 83 cent, so it would only work to exchange the ones. Thanks for your help

Does anyone have a few pictures of accidents where you can see what can happen bad through the rear shelf? In the BMW Forum, someone doesn’t want to believe …

I got my Clarion yesterday and it’s built in. It’s ugly and the touch quali is for the ass. Display a bit small and the colors are also garbage. But setting possibilities without end and that’s my problem too. Did it run in 3 ways mode, but don’t get the trap frequencies. Where I have to separate my LS I know, but where and how on the device? I don’t understand the instructions very well. I can’t separate the subchannel either, because I didn’t find the menu anywhere and auc h the instruction is stupid, or I don’t know. Or do I have to drive in 2 ways mode?

Some time ago I upgraded my system because of space consumption and over-dimension. 3 power amplifiers have moved to a Xetec 5G900. In order to still have power reserves for the sub, I wanted to exchange my HX300 S4 for a D4. Quickly the S4 was sold and the D4 bought. Unfortunately the seller never sent it and refunded me my money back At that time I had built a housing for the old Hertz according to construction proposal. 32l net from 22mm MDF, 88mm tube with 200mm length. I could have reinstalled the new D4 Hertz 1:1, because at least in the theory (bass cad) nothing would have changed to the negative. So far so good. The case is over. Only the sub is missing now. I thought if I did not take a completely different one than the HX300. What would you take then? In the very first line the sub should sound and not press. Just because I don’t need the blunt pressure anymore, I have equipped housing should be as small as possible. But the 32l were already fine. Depth should be present, but need not be brutally deep. My old HX was tuned with the case to 43hz, was enough, because I rarely hear hip hop or something like that anyway. Rather trance, dance, Prodigy, scooter, sensation White Krams etc. but also things like Depeche Mode, REM or 80s Partymukke, Boney M. Whether it is 10″ or 12″ does not matter, but should already remain in the range of the Hertz from the skills. So a 10″ with less depth than the H ertz = build suboptimal housing itself is no problem, but also with housing. Priced up to 250€, if there is one that I absolutely have to have and which costs 270, also worms. But certainly less. Good used or new is no matter, but rather used at the price limit I think. What about Atomic? Manhattan or Quantum? I have already seen Manhattan used for 120, unfortunately S4 Ohm. If it is not possible at all, I also take S4. That’s where the Xet comes in. ec also still enough, my old Hertz already had it. Or I have already seen a Hollywood Edge. Or just the HX again? Would you like to try something new car is a Golf 4 Limo, Front Eton RS 160, level as said the 5G900. Creative suggestions are cordially invited Thank you.