Category: Car Audio & Navigation Forum

I have an isobaric case to build because my Woofer has an impedance of Eminence 8Ohm.I would like to build 2 with one case in each case but then I wouldn’t have a place in the car anymore because everyone would need 70L. What do I have to take into account and how do I have to build the case.I only know that the two have to be screwed on each other with the membrane.The more confused one side recommended to me but I don’t get through it as it is English.If it were possible, pictures wouldn’t be sc Have now 70L bass reflex with 10 tube with 15cm length.Would I be happy about nice pressure and draught up to 30 or 40Hz.

Tach, last time at the tuning world, at the booth of ue2000 times heard a few box rehearsals, and must say that this box here by far, is the most violent thing I have heard so far. Do you look here:http://cgi.ebay.de/ws/eBayISAPI.dll?… Would you like to add such a box to my 2 golf. Does anyone know if this is recommended, because the brand is unknown? So that with the 1000 anything Watt RMS is certainly not lying, since I have listened to the thing in the democar (Golf 2) of ue2000, and after 10 seconds I had to get out again, because the pressure was enormous. After that I had a few hours of headache. Without shit. So I was convinced, and I will probably get it too. I listened to Hifonics, Crunch, Magnat, Audio Systems, Rockford and a few others for comparison, and besides the Audio Systems, nobody else could keep up with it. And the funny thing was that from Audi Systems was such a cheaper 99 Euro Woofer in operation, the besss he was as Hifonics. peace out. Richi

Good day together, Unfortunately the title is no longer known to you already the reason of the stoning. But first a little honey around the mouth so that you then do not go so hard with me into the court. My hobby is just driving in the Ami and not so much in the plant, but I know quite what it means to be dismissed as a “spinner” just because you put your money in the car, or just in the sound. In so far we are not sowt apart. e Question. Which companies can you recommend? e.g. Pioneer, Kenwood, Sony, Blaupunkt , Alpine etc. I mean who delivers quality, what should you leave your fingers behind, who can be combined or expanded well, What should a plant have urgently today, and what do you have to spend? such and similar information would be great. Such a kind of general shopping feeling. I have nothing against good sound, but am not a freak like most of you, but would like something decent. ön if you would help me. Thanks for your answers in advance uscamaro, keep on…

Hello guys, who can recommend me a GOOD power amplifier that I can use for my Canton Pullmann 3.28. which should bring then 2x 150W RMS (so no musical performance !!) or if possible 4x because I want to drive the front boxes later on. Soundwise it should also belong to the “upper class”. Wired I have my dare with 35mm2 so that the fitting At the moment an alpine MRV 1505 works in the trunk which my Syrincs BP 12-300 runs *stolzbin*

Hi, thank you all for opening my eyes!!!!! I bought the Alpine 3553 from my buddy today with say and write 4*35 Watt RMS, I thought that would make the net louder than my radio but pustekuchen—such a horny sound, which makes even louder than my old one supposed to have 4*70 Watt RMS. You are the best one can only listen to you. That’s so horny and with only 35 W RMS how does it work????? Are I ever saying that 35 W RMS???? But still a huge thanks to you You guys, before I buy my shit again, I’ll buy here, then thank you, thank you LOTS of GREETZ PSyc

Hi, at ebay there are currently many older amplifiers offered by Hifonics. Would you like to know how to estimate the quality. I heard that the older things of Hifonics are better than the new ones, since they were still made in the USA, is that true? Search for a potent 2-channel stage for my X-ion 12″. I have in mind the following: Zeus VII: 2 x 300W rms @ 4 Ohm 2 x 450W rms @ 2 Ohm 1 x 900W rms @ 4 Ohm There are no switch functions mentioned in the offer. And what about the damping factor? Maybe one of you is familiar with it (I’m confident there is). …and is there something similar in the price range up to 250-300€, which would fit better? Thank you very much already

I have so slow n problem…have a 30s kicker solo-baric, closed housing, in the case room and as the end stage ne jackson ax-820. tjo now I have the same kicker a second time. and the jackson I will probably have to sell. do you think a wanted 2/300 is enough for the two subs? or ne sinus live 3002? more expensive it really can not be… or yet 2 x jackson ax-820? ^^

Hello Would you have intresses to build a soundboard yourself? I did it and it looks really great like the original shelf. If you want to build one only asks me. Can give tips and tricks. Mine only cost about 35 € matrial. and ~4 hours of work. Unfortunately I still have no photos. P.S. a board in the specialist store with original look costs depending on model 250 € without speaker.

Hello! I finally got my phase Linear Audiophile Six front speaker and installed it immediately. However, I find the sound to puke (sorry, I have to write it this way!). Do I do something wrong, or do I have to get used to the sound first? If I let the Auto-EQ run off from my Pioneer, then it just corrects me a little the height down and that’s it, otherwise it doesn’t change anything. Does everything seem to be very line from the frequency response But that’s exactly what I don’t understand. Something is missing from the sound. Was then with my CarHifi dealer on site and that once heard rehearsal. He said that if I had bought the things from him, he would have changed them to me immediately. At the price (549€) I actually expected more. And now my main question: I still have the Magnat amplifier on it (accurate lack of money). Does another final stage really matter so much in the sound(!)? Is it perhaps due to d He Magnat, that all this sounds so funny? Please HELP me, I am in despair with the things!

Hello together So finally I am closer to the sum I need for my last parts! My system concept looks like this: Headunit: CDX-MP30 <-- get cheap and am satisfied Amp Front maybe also Rear: Wallet 4/320 <--Do I need Amp Sub: Wallet 2/300 <--Do I need Front: Focal 165 (perhaps even the V2 variant) <--Do I need Rear: AIV Green Power (Koax) <-- Do I have Sub: from the PA range (2*30 basses in a 95 liter BR housing) <--- Do I have Powercap: Brax E-Cap with 1F <-Brau ich ich Kabel für das Konzept: Strom Wandet 4/320: 16mm2 Strom Wandet 2/300: 25mm2 Chinchkabel: 1*5m Oehlbach, 1*1m Oehlbach LS-Kabel für Sub: 1m 4mm2 Oehlbach LS-Kabel für Front: 2*5m 2,5mm2 Oehlbach LS-Kabel für Rear: 2*1m 2,5mm2 Oehlbach <--- Depends on whether they come to the amp! Residual tasks: door insulation: bitum and squirtbitum That's how I imagine it! Lack of amps, the front system, powercap, 16mm2 current, LS cable for front and door insulation! My music is rock (everything possible from Jimmy Eat World to Slipknot) and my car is a Corsa B!