Category: Car Audio & Navigation Forum

HI Leutz! habe ne janz important question! how is the page www.car-hifi-world.com? I ordered the AS mx-pro set there and on bill! but now I got a mail that I can not get it on bill (suspicious!!)! so and now they want me to transfer the money to them! they give me 10% discount! that means I’m at 405€! so and now my question: is the site serious?? can you really transfer the money to them without risk??? have you already what bestl lt there and how did you pay??? hope I get a quick answer! Greetz CRX-FAN

Hey hers. Have a golf 4, search now a reasonable facility that has real pressure and sounds good. Nen friend recommended the following to me. -hifonics “son of europa” -infinity 9603i -sub –> crunch I’ve already bought a radio. What do you say to this compilation? Is there something better? The Infinity is available at Ebay for a scarce huni ^^ . Please help !!! Mfg Tipu // *edit* what about such subs? Taugen die was?http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&category=572 92&item=4503311249&rd=1 http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&category=57292&item=4503962087&rd=1 http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&category=38772&item=4504588284&rd=1http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&category=57292&item=4504317214&rd=1

Hello together! I have a MB 250D of the W124 series with two original speakers at the front of the dashboard, but would like to have more loudspeakers for the purpose of improving the sound (back in hat rack?). If there is nothing to be too great, the moaning of the two loudspeakers should just weaken something in front of me! What can you recommend me, where should I put them in the prayer and how? Greetings, Gedo MB 250D, Built 88, Limo, white, hat rack without headrests

I have now increased the Rainbow. It also works so well, but if I want to do a few settings on the radio like Loud on on or on rock, pop or classic, then it’s 2 min good and then everything is just loud and cracking. Where could the problem be? I also have the feeling that on the right side of the driver’s side there is sometimes a short knocking or cracking, but think that it’s only that way with some songs, can it be?

Hi, I installed a Hertz HX300D in a closed housing. But I’m so dissatisfied with the fact that I put in a bandpass box (Stealth 99 Euro) from a buddy. I want to try it out in a bass reflex box. My problem is that the liters are just too little to put the port up next to the woofer. The port should definitely lie above because I want to put it in the spare wheel dump. WinISD comes on 26L with a 30cm long tube. The top plate s should be at least 42×34 and in the depth I need then also min. 30cm. Can someone calculate me a volume where I can get there reasonably. Dmm 250 Xmax 10 Re 1,6 Fs 37,0 Vas 35,10 Mms 179,9 Cms 0,10 BL 12,60 Qts 0,37 Qes 0,40 Qms 4,97 Spl 97 Should already play clean and also generate a bit of pressure.

Hello, have replaced the existing Axton stuff with a Rainbow CSX 265…doors are insulated and so on. What am I surprised about… what do I have for door boards?? The installation at the moment doesn’t make any sense, does it? I mean that everything is open on the side, so I can reach the speakers from behind! How can I get that? Actually, the speaker should use the volume of the door, or not? It’s basically now there like a free-air… I don’t see any other door boards that are open to the speaker sideways. Is there anyone who has them inside and closed them?Here’s a picture….

I was with my Car-Hifi dealer the other day and I showed him what I’ve got up to now (Audio System F2-450 and the CX12 SUB in the 75l bandpass case), I thought that would be something neat, but he totally pulled off that never has 700 watts, and that that would be at least 1 ohm (but stands with 4 ohms on the HP) and that that would be a subsidiary of Lightning Audio… But I think he confused that with Sinus Live, can that be? He wanted to tell me that this Blackmaxx for the audio system….. Greeting Tim Here is a test report from the HP for the woofer: http://www.audio-system.de/pics_audio/Test_Audio_System_CX12.pdf for the amplifier there is no test report, but the other models have almost all won something.

Evening people!!! Had already shot my tweeters!!!! Jetz I got myself new ones: load capacity 100 watts impedance 4 ohms frequency range 2 KHz – 22 KHz transition frequency 5 KHz sound pressure 92 dB/W/M The tweeters, 2 cables where a 4.7 mycro Farad capacitor sits and attachment material!! —————————————————————————- Now to my question!! I wanted to connect these tweeters to my power amplifier 640 Watt Kennwood!! now have i Here it is: WERE CONNECTION 1. In Case of Using Condensator (it is then shown a picture where the Tweeter can be seen and the cable with the Condenser 2. In Case of using CROSS-OVER NETWORK (there you can see only the Tweeater and an arrow which is labeled with cross-over network!) How did I send the parts to that they do not break me??? Thanks already! MFG Weeman

Hi, I got doorboards for my car the other day. The boards have space for 3x 16 speakers per side. Now my question, which kick basses are what? (priced, if possible cheap!) What does this look like with the crossover? Do I need a 3-way? Then we would be at the power stage. Would there be a 2-channel, which brings about 350-400W RMS, that’s enough? PS: For the bass there are 2 Eton Crag Woofer. 2×30 (600W) to Audio System F2-500.

Hello, the search somehow doesn’t have the correct answer…. So the following components are supposed to be connected. Front: per page 2 x 13ér systems. (i.e. 4 tmt and 4 HT ́s) Rear: per page 1 x 16ér system. 4 channel power amplifier. (2 Ohm stable) Can I now hang the four front switches on 2 channels of the 4 channel power amplifier. Speak the 2 systems for right to channel 1 and the 2 systems for left to channel 2? And the rear system right to channel 3 and the rear system left to channel 4? that so of the concept?? Please no opinions about sense or nonsense of this action, go here purely about the principle. Thank you.