Category: Car Audio & Navigation Forum

Moin,moin I’ve checked everything here now whether someone recommended the topic “what LCD or TFT” you should use best for ́n carpc. of course I found which where dinga were recommended which cost well over 200euro, but which is not in my budget. I would like to know what is better LCD or TFT (because I don ́t even know a difference)…but I guess one of the two is more expensive… I don ́t want to spend more than 200euro in any case, I prefer something like that around 1 50 euro… …and like so much in life is of course again the GREAT decision… (I haven’t thought about it yet) …of course the technique can convince me (touchscreen) to spend a little more money… I would just hear some recommendations from you… pictures would be nice, because the eye eats well known with … Mfg Ludger

Hello guys, I also got a Fox (1.2, 55 HP) a few months ago. The serial system sounds rather less with me and the basses are not clear at all. So I wanted to buy a new system (amplifier, sub, 4 loudspeakers) + radio ! But since I have very little idea in this area I need your help Can you recommend me a system ? does not necessarily spend more like 300-400 €. Like it if it has deep but clear basses and the speakers should have a gu I would like to thank the rapporteur for his excellent report.

I’m certainly not petty, but now I’m tired of constantly stealing my auction descriptions at ebay. It’s not like I’m scraping them together in 2min, I usually need quite a long time for it. I know that you can’t just use pictures like that from someone else, what about auction descriptions? Maybe someone can tell me if/how I can proceed against it? I wouldn’t mind if ever. my A I think that’s what I’m smelling of when the text is just copied 1:1 (including the same optical design) and then changed, but if the text is copied.

Hello to Alle…. i’m driving a B6 Avant with Navi+ and Bose Sound, which in itself is quite ok (Please no discussion, whether scrap or not), sometimes apart from the bass…. had in other cars always retrofitted and systems in it… but it should stay so far in it, because a big effort is not worth it. The car has already 290tkm and I don’t put 2000€ or so in it…. i just want to polish up the bass a little bit 🙂 signal I reach in front of the Boseve I don’t need a lot of power either, because it has to fit the Bose and the bass should not play the rest in the ground… 25cm or max. 30 it should be and I am not yet 100% convinced to use such a spare wheel housing. I actually wanted to get the trunk completely… but if you tell me that it sounds totally bad, if you have the cargo floor over it, then ic has to h I guess take a housing, which is in the back. First I had thought about an active sub, e.g. this Helix 8″ with DSP… should be very good… but how do you do it with the cables? there is certainly no quick connector for where you can get the whole thing out quickly, if you need space! oh, yes, it shouldn’t be too expensive… because you would be active for such a thing and all the cables would be at max. 350€… more than 400 or 450 should not be… 🙂 Greetings and thanks in advance P.S. I already know about it, but I am sure with current knowledge 8 years later, the Car Hifi phase has been a while ago 🙂

Hi, so at the moment I connected the sub to my amplifier (4 channel) via two channels. The other 2 channels go forward into the amatur board (Polo 6n BJ 97 44 KW). But I have bought 2 doorboards with two LS. Since there is no more space on the amplifier, I could connect 2 LS directly to the radio. Now my question: Should I rather connect the LS in the amatur board or the LS in the doorboards directly to the amplifier? Think, because I can control the amplifier, that on the amatur board If only high sounds should be played, does the connection of the AmaturenLS offer itself or? Does I call the doorboards directly to the radio?! Am I right with my assessment? Achso eine 2. ENdstufe nicht einbauten Ich mich mich nicht einbauen Danke

HI, would you like to increase my pressure yield in the interior of the car. is it advisable to include BR pipes (incalculable also not that you can calculate what) in the hut rack in order to get more pressure? Does that mean that the pressure through my existing ski bag opening and then through the BRs in the hut rack to guide inward? Would I have thought of 2x 70mmx150mm? not that I will vote with it any garbage and the whole result will sound worse. sure a lot of pressure from the subs away and powdering into the air, so if the pressure is already pressing on it, can he come right inside? Greeting Eddie

Hello can help me a few days ago, I bought a Hifonics ATX 12 BP: ATX12BP! • 12的 (30 cm) Single bandpass system • ATX12 subwoofer with 64 mm oscillating coil • 1000/2000 watts, impedance 4 ohms • Side panels with PFTG logo • White LED interior lighting • Engraved HF logo on plexiglass • Edler HiFonics logo stick on top • Dimensions: 600 x 380 x 320/480 mm And now I’m looking for a suitable amplifier also one of Hifonics. I’ve picked out 2 times. please say if one of the two fits. Or say a better one. Sage jezz thanks already. Hifonics Zeus ZXi9000 MKII 2-channel Class A/B Analog Amplifier 2 x 300/450 Watt RMS @ 4/2 Ohm 2 x 600/900 Watt MAX @ 4/2 Ohm • Class A/B Analog Technology • High pass filter 10Hz-1.2 kHz • Low pass filter 30 Hz – 150 Hz • Bass EQ 0-18 dB @ 45 Hz • Band pass function • Mono flashable Hifonics ZXi 9002 2-CH Class A/B Analog Amplifier 2 x 300/450 Watt RMS @ 4/2 Ohm High pass filter 10 Hz – 1.2 kHz • Low pass older 30 – 150 Hz • Bass EQ 0 – 18 dB @ 45 Hz • Bandpass mode • Mono flashable • Input selector

Hello, I’m looking for a suitable final stage for the Woofer Blaupunkt Velocity vpw 1200 [url=http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&item=320675858760] Now the question is…have another final stage (Jackson Fox 450) in the basement and would like to know if you can use it or if it would fit, or if it makes sense to invest another 150-200 euros in a final stage that fits. Suggestions urgently needed. Thanks alreadyma in advance 😉

Hi guys, I need , as written above , the help of people with a clue. I have a Space Star GDI (BJ 1999) and want to install myself an audio system. Since I am an absolute audio loan I wanted to ask you what I need for it all. I mainly listen to rock and electric and want a good system that delivers rich sound and good bass. My budget is so about 300 € to 400 €. With all the wussel of offers I already feel dizzy … ride n 2 way system oedr b do I smoke n 4 ways or n 2.1 or how?? I have unfortunately really little rope with the hardware … (of which I would still be able to wire xD) Is there also something good (for my purposes) as a set? How much power do I need to get a good sound / volume / bass ratio. (I hear moderate volumes and want to blast my eardrums ned ^^) Thank you for your tips Lg Daniel

Hi people I’m looking for a new subwoofer. my old man gave up the spirit yesterday (SPL Dynamics V300 S4). now I’m looking for something new but he should be able to do more performance than the old one. radio alpine cda 9886r, end stage kove k4 600, front system spl dynamics sd 6.2 he can cost 200-250€ aso and music direction: everything that is good wummmssss has e.g. techno, trance, hardstyle, hands up something in the direction I’m currently driving a chrysler voyager so big room