Category: Car Audio & Navigation Forum

Hihttp://www.google.de/search?… —>http://www.etc-shop.de/…/lshop.cgi?… —>http://www.beclever-shop.de/s01.php?…exclusively the worst scrap……but in the first places at google….complete installations at ebay:http://cgi.ebay.de/…8769QQQihZ013QQcategoryZ38770QQrdZ1QcmdZViewItemhttp://cgi.ebay.de/…2238QQqihZ011QQcategoryZ38770QQrdZ1QQcmdZViewItemhttp://cgi.ebay.de/…4899QQihZ010QcategoryZ14268QrdZ1QQcmdZViewItemhttp://cgi.ebay.de/…0321QQihZ015QQcategoryZ142Qqqqqqqd ZViewItem so I now go to the abeit to recover from it…………..is cruel so much crap on a pile….. bye

Hello together, I’m just facing a little problem because I don’t know which radio to buy. On the point: Actually, the Alpine CDA-9853R was my favourite. Among other things, because I already have an Alpine Ai bus changer. But my CarHifi dealer advised me from this device and recommended me the Sony CDX-F7750, because this radio apparently – unlike the Alpine – has integrated some processor functions already. So far, so good, but what me It is surprising that the Alpine is several hundred euros more expensive than the Sony. Here is the statement of my CarHifi-man:… but I would never recommend an Alpine radio under about 500 euros on radios up to 300 euros there is only one with top sound of the Sony CDX F 7750 with 4 volts and 3 outputs (front / rear) & subwoofer with built-in active softness and pre-all MP BBE which greatly improves the sound and the Dymamic, which sounds with its 24 bit Burr Brown D/A-Wa I’m looking forward to your opinions! Dear greetings Hoppi Edit: Links! Here’s the Sony radio:http://www.sony.de/view/ShowProduct.action?product=CDX-F7750&site=odw_en_DE&pageType=Overview&category=ICA+CD+Tuners http://www.alpine.de/content/german/a581.det.CDA-9853R_CD—MP3—WMA-RECEIVER.htm

Hello! I got an older Hifi system for almost nothing from a friend. I know that the brands don’t really do anything and that especially with Magnat many will shake the head, but it was as said practically for free. It is about the following system: older Pioneer CD radio normal boxes front ( tweeters in the armature board, medium/lowtones in the front doors) the front boxes hang only on the radio back then I have a Magnat Classic power amplifier and a The rear shelf with 4 x bass driver, as well as the matching mid and tweeters. Two crossovers are mounted on the shelf, i.e. from the shelf two pairs of cables come to connect to the power stage. I have now done this in such a way that the front boxes remain on the radio and the power stage supplies the storage. This should also stay as far as possible. I operate the shelf on two channels, since only two connection options come from the crossovers. a question, how do I set the power amplifier correctly. I have a controller for level, HPF, LPF, bass boost and another switch X-Over with the settings options “Full, LPF, HPF”. Hope you can help me there, because unfortunately I have no instructions for the power amplifier. Addendum: Can it be that I should not change anything at the power amplifier with HPF and LPF, because still the frequency deviations on the shelf on the way to the boxes come in between?

Hello, what do you think about the Eton PA2802? Unfortunately I missed the test in the Car&Hifi. Did I actually want to increase the soundstream TR2250, but I’m now strove over the Eton Would I be interested in what you think of the two levels and which you would recommend to me.Maybe someone also has the test in the Car&Hifi? MfG Wob-Driver

Hello, I would like to build a good/priced system in my IIer Golf soon. I will spend about 150 € for a compo. I thought about the Rainbow, Focal or Phase. The systems all cost about 150 and should be good, but I will listen to them all before. Since I will then also get an amplifier ( of Carpower probably ), I think now if I need a 2 or 4 channel amplifier. If the FS is enough bass, I can have a 2 channel Take it, otherwise I would have to buy a 4 channel verse for the sub. I put more value on sound than on pressure and listen to a lot of rock and hip hop. So I need an additional subwoofer or do the mentioned systems suffice? Sry for so much text… MfG.

Hello. Have my driver’s license and car for 1 year now. Now I would like to equip my car (golf 4) with a music system. Unfortunately I have no idea about the matter at all. The system must not be too expensive. A maximum of 350 euros I would say, although 350 is already very close to the border. Radio I already have. So I would need: subwoofer, front system, rear system, power cap, possibly power cap? Right? I picked something out, and this is here:http://cgi.ebay.de/ws/eBayISAPI.dll? ViewItem&item=220064064921 What do you think about it? That sounds really good or not? Is everything you need as a beginner. Is clear, there are certainly better facilities, but I really don’t want anything good, I just want a system that I can turn on without scratching it. I hear Techno/Trance/Goa/Hardstyle/Hardcore if it is important. Would be very grateful for a detailed consultation.

Hello, I wanted to ask you why I was constantly running the basses. I paid attention to the cabling (+ and – not swapped) as well as the diameter 6 mm2 cables first an Axton Z series then a Mac Audio Absolute 300 I really put the Carpower Wanted 2/300 so small that nothing could happen. How do I have to set my car radio JVC KD-DV6201. I really soon despair about what I’m doing wrong. Can one or the other give me advice…? ??

Hi, I recently bought the phase Linear Audiophile Six. As you can see here, there should be 4 switches. I approached the seller before buying it and he said he only bought the system with 2 switches. I thought that maybe it was distributed earlier (since the system is already 3 years old) and bought it. But now I noticed that the high tone ALWAYS runs full range! I.e. if I set the low pass at the level, then I also hear the melody that the sub would play … and that from the tweeter This of course severely restricts the maximum level and the compo would be a tot sin. When I look at it more closely, I noticed that I have exactly the midrange softness from the picture in the link. And this is ONLY the one. Besides, the TMT whites have so many connections! Looks like this: [Out]: TW- TW+ WO- WO+ Free [In]: – HP+ + Now I have thought that I can use my active softness in a sinister way e. I then wanted to run the HT over the Axton C502 at 2x60W and the TMTs at the Audison SrX 4 at 2x160W. Does that make sense? Can that sound good? Always who njemand actively separates he has also installed an equalizer. Does actively disconnect without EQ and so on make sense? 2. Possibility would be to re-create the HT-wives. But I would need the schematic. Can someone please help me? That would save my day Oh maybe someone also has the manual of the composition, which would help me. Re also great! Achja 3. It would be possible for me to take the high tone branch of my current Rainbow SLX system. But it probably is not a good solution.

Hello, I have a new case for my GNZW 15http://www.ground-zero-audio.com/deutsch/05_nw15.htm. Currently it is installed like thishttp://www.ground-zero-audio.com/deutsch/06_nb3800sxt.htm The dealer said Vollgenders. I should build a box that has about 60L +/- 1L volume. Then use the subwoofer and use a passive membrane opposite the subwooferhttp://www.ground-zero-audio.com/deutsch/05_p15.htm No bass reflex tubes etc. That’s what the dealer said. Now I wanted to ask you if he just wants to talk me up with a passive membrane and a lot of work or is there something about it? Greetings Hermann

Hello, wanted to build me a nice doorboard for my new TMTs Should be a closed enclosure of GRP, which I will adapt to my door My question is however only how much volume such a board should have about. Morel Dotech Ovation 6 Here are the technical data: Impedance: 4 Ohm Load capacity (nominence; max. W): 140 / 300 Resonant frequency (fs): 57,0 Hz DC resistance (re): 3,2 Ohm Sound pressure: 90,0 dB (1W/1m) Force factor (F/I): 2,97 N/A Vibration coil inducti vity: 0,20 mH Effective membrane surface: 119 cm2 Moved mass including air load: 10,0 g Equivalent volume (VAS): 15,30 Suspended yield (Cms): 767 Electrical quality (Qes): 1,35 Mechanical quality (Qms): 5,60 Total outdoor quality (Qts: 1,09 Frequency range: 40 – 4000 Hz Air gap height: 4 mm Vibration coil (D; length): 54 mm; 10,5 mm Installation diameter (mm): 141 Installation depth (mm): 60 Music taste is divided into House and Hip Hop if that is important. , but now I want to build up and listen to them first! Well then I hope for nice meaningful answers Greeting Funtiger83