Category: Car Audio & Navigation Forum

Hi, I have currently actively separated TMT and HT at the power stages. Theoretically, the Xetec steps can separate nn HT, but practically the pots in the range are far too sensitive. stands the controller at 4,5kHz and I don’t even turn correctly, but touch it almost only with the screwdriver I am directly at 1000Hz. I just can’t get cleverly set Now I thought, if I separate on the passive switches TMT and HT, I can filter them with it and L At least that would be a simple transition solution. I already play with the thought to buy a fully active capable radio Just before I now wanted to make a fuss about the beautiful switches I wanted to ask if this works as I think it. I once signed off the circuit and flushed it up. At the red strokes I wanted to interrupt the verbination, so the HT would be separated. The -3 and -6db connections I wanted then as an input Take for the HT (blue lines) And what is that about the red arrows for a component? that’s the only thing I can’t quite assign.http://www.stefan-lies.de/schaltplan.jpg

it is a somewhat stupid question, but my action through which this comes about is still a lot more crazy. actually, my interior is not only wet, but NASS, and I would like to get a professional dryer from the construction industry. since I have nothing more to worry about than my radio and my LS, I want to make sure here again: is there any danger for radio, soft, LS, blablabla when the dryer sucks everything completely dry inside? at what temperature? naturen such a thing works, I don’t know, but I read something of 30 degrees. laughs at me, instructs me…I know, the question is crazy, but I don’t want to ruin myself any more…

So I want to get rid of something.I have just installed doorboards in my audio.Unfortunately, there are koaxe in the doors because of lack of money.However, others come in.I have to run these over a final stage.Hints in the suitcase room I have a small bass box inside.The speakers that were on the rear shelf I jammed off. A music pleasure that can hardly be described.Jetz I hear the music quite differently…many music effects I have never heard before.Although are inferior things verba ut and not muted (lack of money, but still comes) but in contrast to what it was like before it was just hammer!!!!! Had previously operated oval speakers on a shelf with the final stage, front the ori 10s over radio.. a roll about n final stage found that actually quite good until I ended this afternoon with my installation/conversion…before the music was compared to jetz to vomit…. wanted to discuss this only once for the people to make my fat rear shelf clean. eats you hear the music in a completely different style… my thanks go to those who have helped me with hifi questions so many times Zuckerbaecker Doom_ teamUV_wu-town Farmer Lord Nickon Bimbel83 mithras666 people you have just CLASS that I have to say.I wish I had the experience of you.

in order to attract a few more people to meet (http://www.motor-talk.de/t1459030/f8/s/thread.html) – here also my renewals http://img527.imageshack.us/img527/5179/dsc02742bm0.jpg is already using zapco and here I’m already starting …http://img472.imageshack.us/img472/2319/minidsc02700dt6.jpg these chassiss are to be installed (rings are available at the D00M)http://img526/3703/minidsc0270my2.jpg.jpg continues to go …http://img526/3703/minidsc0270my2.jpg After several grinding, resin and spatula work…http://img453.imageshack.us/img453/7778/minidsc02714lm2.jpg they were then painted after hansart with special sound granite varnish, but probably still gets a “color” change.http://img514-2938/minidsc02724jq0.jpghttp://img514.imageshack.us/img514/8233/minidsc02725if5.jpghttp://img490.imageshack.us/img490/7500/minidsc027.jpghttp://img490.imageshack.us/img490/4065/minidsc02728we7.jpghttp://img475.imageshack.us/img490.imageshack.us/img490/4065/minidsc027.jpghttp://img475.imageshack.us/ img475/3534/minidsc02729xw4.jpghttp://img490.imageshack.us/img490/6494/minidsc02731eo4.jpg also get species-appropriate houses …http://img475.imageshack.us/img475/3117/minidsc02733ec4.jpghttp://img511.imageshack.us/img511/4191/minidsc02734nv5.jpg the a-pillar cladding also lay around, so -http://img162.imageshack.us/img162/3775/minidsc02735mf3.jpg here still the great joints for the high-ton housing :http://img162.imageshack.us/img162/5450/minidsc02739rl7.jpg mfg eis

Hi, I just got my Christmas present, a car radio, model etc. don’t matter. When I connected it, in my VW Polo 6n2, it didn’t make any noise. Ignition on, power cable (yellow to red and red to money) switched, nothing! The original VW radio works however. Unfortunately my old Sony broke down in the summer, no more operation on the panel. On that I have in fact installed an original VW radio. Now, I have a new one and must make sure that the current How did I find out? I installed the new radio in my sister’s polo 9n, runs perfectly, so there is no radio. Problem, how should I please renew the power lines? I don’t know where the cables lead, nor do I have to disassemble my half car for that! The iso plug covers the cables very tightly, so wobble contact doesn’t eat either. Maybe you know a solution?

Hi guys, I read through the forum yesterday and the eyes were opened: I’d rather separate myself from my 30 kg HUT tray and rebuild in my car now. And there are some questions there when planning and I want to open some threads and hope for your help. This thread here is one of them I have to expand my analge as in the overview. in this context you can also quietly tell me what you think about it. I ch jetz has an amplifier from Kenwood. Model: KAC-848. I don’t know exactly how much power he brings with how much ohms etc. and I would like to do that. Where can I look up something like that? Because if he has enough power, then I would also let the rear boxes run over the amplifier. (on the schematic in the attachment they run over ́s radio). is he sold no more else can I look there… does someone know? Thanks. Propp

so stillma a topic, because in my on the one special radio answers not so really! what sit of the amrke JVC to hold?? So my ellis ham sone small system of jvc, the is hammer! full of ultra small and hammer sound and bass. I ask because jvc autoradiso are good and well payable and also extrme well equipped. answer please!

Hi guys, I know the theme we’ve had many times in a similar way. But what I’m looking for are simple songs with a horny stereo effect. You already know beautiful right-hand left effects. Do you know good songs that you can recommend? Like, for example, the initial sequence of Yellow , the Race Thx.

Hello, would like to install in my Astra F ne Car Hifi system soon. I have a few parts for a while and now need some answers to my questions. I have up to now: Woofer: Magnat Transforce 1200 300Sinus/600Max Amp: Axton C408 2 channel 350Watt (as far as I know the sine indication) Boxes: Pyle PDI693 3 way systems 150Sinus/300Max I want to get: Radio: JVC KD-G611 + possibly other AMP (see below) Now to my questions: 1. Where should I connect the 3 way systems ? Are 4×25 Watt sine from radio not too little if still the 4 standard Opel boxes hang from the front 2. Should I sell the Axton if necessary and buy me a 4 channel ? 3. If yes this power amplifier is good what: LINK 4. Where can I put the cables to the radio or the vehicle inside with the Astra F in the engine compartment ? Find no hole to the driver’s room. 5. Fit the standard plug at the Astra right on the radio. Auto is year of construction at the end of 96. Thanks in advance, hopefully someone has for me A I don’t know how to keep going. Oh, well, I’m pretty limited from the budget. P.S. The Amp + The Woofer had a buddy in it. Bass was really very good. If I’m going to get a new amp it should be the same. That’s an addition to question 3!

I think I disassembled my sub full of anticipation yesterday I got my μ-dim prox 2.1 kd… well I didn’t batter for a long time….840.4 out the monoblock in… and first plugged, wired, checked, fitted… turned on, went…. but suddenly there was a funny noise from the sub, the end stage went in protection and was out, it sank… I radio out and on again. first quiet, went again.. snout full and continued today… slowly started again loud g emacht.. puff, no stinking.. end stage not in protection.. I suspect that yesterday I chased through one and today the other spule of my hollywood edge 1524d4… the subwoofer was already running on 2 channels of the 840.4, but apparently he just didn’t get along with the balance of the monoblock or I was too stupid… just too stupid… radio to 60%, gain to 80%, end stage remote full.. well… I have the subwoofer at 2 ohm with 1.3 kw operated abzuglcih of the settings.. so i think that about 1 kw was available to him for which he is also designed..but why did he rip up the ass?? I bought the final stage used, CAN you have something to do with it?, the final stage definitely goes still…. I’m the opinion that the sub simply would have had to tolerate the performance according to information but now it’s true that the spits are going through and nothing is moving more… would you have had some theories what else could have happened? 352 current at ner stiner spv 44… the cable was just totally micky and I thought that it was going through and got me better thicker today.. but as I said the same… can nciht imagine that the cables have messed up… hope you have paat tips.. doesn’t want to make the mistake again!!! LG axel