Category: Car Audio & Navigation Forum

Hello first of all. Hope there are a few nice people here who can help me =) have to buy before me nen corsa b 1.4i and plan now already the whole system in there… have to jump so about 1000€ for it. music direction is hiphop and trance/techno. had the following introduction: a 30s (38s?) housing sub which makes quite good pressure. a 4-channel end stage with sufficient power (more than 4x100W @4ohm ?) 1F power-cap new 2-way coax frontsys, possibly also hecksys for the storage which companies can you recommend me? hiponics, soundstream, esx, groundzero….? but have a few more questions ) is the lima/battery from corsa b sufficient for a larger end stage or does it have to be a stronger lima or second battery? and can I run the front system on the R/CD, and still run my end stage at the same time via the amplifier output? soo….much written and little content ^^ Thanks already GrandLX

Hi together, have a new radio – the alpine cda-9812rb. I have a question to ask. and that is: maybe you know what this could be about, that the radio does not concern automatically, if I start the ignition or start the motor. I always have to press the “start” button first. I have already looked in the manual, but there is also nothing. cable I actually connected all in the back correctly. or yet not…?! oh yes, if important, I drive 2002er twingo.

Hi, I posted here some time ago that my Sony Radio L350 always beeps three times when I turn off the ignition of my Golf 4. I have managed by now that the radio does not always give a beep tone when I turn up or down the volume, resp. choose another transmitter. Only I can not get the beep away when I turn off the ignition. Does anyone know if you get the overhaput away? MfG…

Ahoihoi, don’t know if I’m right here (doesn’t have anything to do with a car), I’ll try it anyway! As in the title, I want to hang ZWEI existing 5.1 sources (PC & DVD player) on A 5.1 boxing system (everything connected by chinch). Is there any switch at all for this? Or another trivial solution? Have just Googled, but apparently nobody has such a “problem”?! Even iB doesn’t have such a thing! The idea is not so absurd, does it? Thanks already – furby

As I said, I need a new Woofer. Listen to quite a lot of HipHop and RnB but also Rock and House. So there is no pure basswoofer in question. From the low bass I found the Hertz enough, only cleaner and more precise the new one should play. Found the Hertz in some things a bit spongy. I find the Exact SSW23 very interesting. But with this one you need 2 pieces for good level, which I can not afford at the moment. What do you think of an Atomic Q unatum? What about the low bass? I’m already aware that I have to cut down on the music genres, but there should be some fun in HipHop.

Hello, how do I get the maximum power from My Subs? There is an audio track AW1206t connected to an impulse SD1500, and call smaller audio track subwoofer, is connected to an SD 800._The woofers are double swing coils, so simply a cable to each coil?

Hey people, I installed my whole system today…then it happened all of a sudden, radio doesn’t work anymore… I wanted to switch ignition plus and duration plus so that the radio stores the transmitters etc. but that somehow didn’t work out because I didn’t get the cables out, so I taped them and glued them together again.. of course I pulled the cables and so on and at the beginning everything worked out, after that I got rid of ignition plus and duration plus snapped up and so the radio connected, since it went on and off again, when I then made everything normal again and wanted to connect the radio it didn’t work anymore, I get from the wire harness also no more remote to the end stages… therefore now the question, can it be that on the wire harness from the car something broke or is there a security that is for the radio in the car? hope someone can help me… P.S. the radio would normally have to look at if I only connect it to permplus e.g. at the end level, so plus and minus… then the thing should also be going on or ?

Hello, I have at the moment “nichtmal” 1kW at my plant (Zeus VII at 8ohm bridge and ne Signat RAM3 Mark II at the FS), I put plenty of thick cables (35mm2) and also took quality (Sicherungshalter is e.g. an ANL from Earthquake). Battery is ne Maxxima in the engine compartment. However, I still have extreme light flicker. It wasn’t that bad even with my old car with the Crossfire VR4000d (at 1Ohm!). What could this be about? Would a cap be the only solution? MfG, Di ddy

Hi Leutz, After LANGER waiting I finally got my “old” dobos re-made again. or ham mer put us on yesterday 12 hours and my already existing dobos rebuilt. The reason was that the speakers sat directly in front of the actuator and could not breathe at all. After long, long sweating and grinding work mer finally finished yesterday. At this point a big thank you to my buddy Sascha (caraudio-store.de) Ings. h We also spent 8 kg of CHP spatula!!!! Every dobos has a fight weight of 14 kilos by now. Unfortunately, it didn’t change. But I’m satisfied with Supi. I wanted to do the same. But just look for it yourself. Edit: I didn’t get to clean up yet, as there’s a lot of work going on today. http://img225.imageshack.us/img225/8096/img0247mediumkq3.jpghttp://img225.imageshack.us/img225/7346/img0248mediumjf3.jpghttp://img301.imageshack.us/img301/3641/img0249mediumec2.jpghttp:// img301.imageshack.us/my.php?image=img0250mediumyn1.jpghttp://img225.imageshack.us/img225/2914/img0251mediumdg9.jpg

http://cgi.ebay.de/…1951QQihZ008QQcategoryZ38772QQrdZ1QcmdZViewPlease post opinions !