Category: Car Audio & Navigation Forum

  • tonal high quality cd’s

    hi, I know, such a thread with sonically great recorded cds we had already several times, but I think I am a bit stupid for the search function can find nothing and since I want to buy a few new cds I need a few inspirations. so are actually looking for all musical directions, it depends above all on soundly good recordings! because wants to feel my system still a bit on the tooth and there I still search for fine pieces, so that even further beautiful n the geese skin feeling wide makes on the encounter I heard at the felix e.g. this ingenious flamenco recording, but can no longer remember the name, which was e.g. very delicious. just write what you recommend and especially why!! left to old threads are also welcome mfg max

  • Final Levels Prob [Help]

    so my colleague from me has picked up son set from saturn boxes. sub end stage and cable etc. end stage is from magnat… yes I know quali etc… but funtkionieren it should be trozdem or? now we have yesterday 3 std. to eat it and it just can’t get it. so the thing gets somehow no current. so the green powwer led does not glow. so we connected the red cable to the battery. 15 cm after that the fuse(60amp) then put back and into the end tube channel (where 12V stands. as well as in the line) then the blue cable (MASSE) to the end stage ran and off to the carousel. so we tried 10 different mass points and even with the dremel still sanded off color. but not possible. so then we still have the chinch cable laid completely normal from the radio back in the end stage. in the middle is still such a thin cable that we also connected to the end stage. however, did not know where it comes to the cable tree at radio. I know not a think not that that has something to do with the current or ? so the power lamp(green) doesn’t light up. we just held the small cable from the chinch cable to a few cables and from time to time the red lamp has lit up… so overloaded. as such all the fuses are ok. !?!?!?!?? no current what is this ???? have you got an idea ??

  • dxz558rmp NEW for $30???

    hello, I’m in usa right now and have found myself looking for a car radio because of the good dollar course, among other things. and for say and write 30 dollars a (or up to 50) brand new clarion dxz558rmp.http://cgi.ebay.com/ws/ebayisapi.dll?viewitem&item=1701666649896 does any of you see a hook? that wouldn’t even be 20€…in usa you can start with the tuner nix, but trozdem… does anyone see a hook at the thing? gruß karl

  • Consulting for 2 DIN tuners with navigation

    Would like to hear your opinions, which 2 Din Autoradio are recommended with navigation. – Price up to max. 700 € – If there is a very cheap, and good there is also Please with offer ! – Is only for the use of the original loudspeakers, no amplifiers or subwoffer operation – I am mainly concerned with a simple operation, touch display, resolution does not need to be a full HD but also no 2mm large pixels just a clear picture, good navigation system ! – With the brand I am completely open there no farvorites – For use via the steering wheel remote control – Evtl hands-free function Would I be happy about tips for purchase advice MFG

  • Car radio pulls battery empty possible???

    Hello dear forum members I have a little Proplemschen. I recently installed a car radio with power amplifier. Power amplifier nicely connected with remote and it went out even if I pull out keys so well. So that with my radio the transmitters or bass settings remain stored I soldered the cables! Red with yellow and yellow with red. So the transmitters have always been saved and everything is in order. BIS I have been propleme for about 5 days with the Battery it is ALWAYS empty and is not enough to start from the engine as soon as I have not driven for 1 day anymore. I have finished the final stage but still is still so. What can this be? I just wanted to start again and engine is not going to go again it was not even enough juice there to close the central transmission. What I noticed though I pulled out keys was car radio still on (which it was not before otherwise always gone with) and the Amatu the displays were very light only when I have closed the car radio again everything went out of power… What can that be?

  • New speakers for Peugeot 206 (back)

    N’Evening, in the Peugeot 206 forum some time ago had already created a topic for speaker requests, now I decided to change the rear box pair (13cm) first, because this sounds much worse than the front speakers with a tweeter each. I found the following boxes on eBay, which are suitable (I want to spare me the lack of time and knowledge of larger craft work):Magnat CFS 132http://www.ebay.de/…/271218685652Kenwood KFC-E1364Chttp:/ /www.ebay.de/itm/28111676479JVC CS V 527http://www.ebay.de/…/130558661770Pioneer G-Seriehttp://www.ebay.de/itm/110829123849 Would you particularly recommend one of the pairs to say something about sound characteristics, quality differences, etc.? I suspect that even such loudspeakers from the low-price segment are better than the originals. Of course, I’m open to further suggestions. Thank you!

  • HELP !! Active subwoofer on standard radio without cinch

    Hi guys, I have a Volvo C30 and there it doesn’t make sense to exchange the standard radio because the air conditioning system is running on the radio My question: I bought an active subwoofer this of course has 2 Cinch inputs my radio has no Cinch output. So I have to come from Cinch to my normal speakers or on the cable of it. Sure I lose quality but I know that I can tell myself who I have to put the cable ? if I cut the Cinch cable I have a total of 4 cables two of the white and two of the red. And a speaker cable has only two poles. Which cable is about ? how do they have to come together ? thank you already

  • Upgrade Passat B6 3C Radio

    Moin Community, I would like to upgrade a radio with touchscreen for my B6. I have looked at the internet and wanted to ask you if you have any experience with the models, or if you could tell me what I have to pay attention to when buying and installing them. Here are the selected models:http://www.amazon.de/…/ref=sr_1_5?…http://www.amazon.de/…/ref=pd_sim_sbs_23_1?…http://www.amazon.de/…/ref=pd_sim_sbs_23_2?… In particular, I would like to know if the connection to the car works without problems (sound system etc.) and whether you need any adapters or similar. I am already happy about your answers With friendly greeting and nice evening still

  • Low budget speakers wanted.

    Hello, I’m currently driving a Honda Civic Ej9 and would like to upgrade my speakers just for little money as possible. I would like to use them through an Alpine CDE-120RM Hab found by googles that are attached to the front 15.5cm speakers. There is no such thing at all? I would like to spend maximum for 4 speakers (2front 2 rear) 100€. They could be used, after all, this is also an older model my car. The reason why I want to drive “Billig” is, that I spend the money otherwise if I want to buy a new car.

  • problems with connecting my subs to my end stage

    Hello dear members I once have a question, since I have dealt with the topic “ohm impedance” for a long time now. Unfortunately only after I got my amp and my bassbox, because I did not know the impedance such a role play. now unfortunately I did not understand everything and please help me so that I can connect my system correctly. to info : AMP : Infinity kappa one 1x 500 watt rms at 4 ohm 1x 800 watt rms at 2 ohm box : infinity reference 1220DE (2 built-in) e bassboxes in a housing) nenimpedance 2×4 ohm efficiency 97 db load capacity (rms) 600 wat now to the individual questions. Question 1 if I switch the sub now in parallel I logically get 2 ohm. should I now distribute the cables to my 2 end stages channels brimmed: the two + cables on end stages channel 1 and the two cables on end stages channel 2 ? or rather leave one channel standing and everything on one channel ? question 2 : my bassbox with 2 bassassis gives a b alasability of 600 wat. I couldn’t find anywhere, unfortunately, whether this is described on a chassis or on both of them together so if I connect the pinned one if it’s 1200 watts or together 600 so that each chassis has only 300. vll have experience with it what is right and wrong here? then I know now that the box should never have watts like the amp can give (clipping).ALSO HOW THE BEST APPROACH?