Category: Car Audio & Navigation Forum

hello! hope the pictures I get in here now: make me some suggestions which front system would fit. sub 10w6, amp lrx 1400 amp front lrx 2,500 car sharan mfg, and happy tight! torsten

Hi guys! Maybe someone else remembers that I wanted to build my PC into the car with runtime correction. I did that. I am the reason that I don’t need it, but I really want to try it out. I now have a tool for the kx drivers for the sound card with which you can specify the delay in milliseconds. I have calculated and want to make sure that I have no mistake in thinking about it… So the sound waves move with approx. 1200 km/h. I use 3 loudspeakers. Namely one left of me one right of me and back of the subwoofer. The left LS is about 50cm away. The right approx. 1m. The subwoofer is about 2m away. (I measure everything afterwards after ) So, if I am right then I would have to adjust all loudspeakers to the distance of the subwoofer now so that the sound waves all arrive at me at the same time, right? So as if all 2m were away. That means the subwoofer needs ic h not to delay at all. Delay the left speaker by 1.5m and the right speaker by 1m. Right? Or do I have to measure how far away the speakers are from the subwoofer and then delay that distance? Stand there just something on the hose… If I would do that then the sound would come almost only from a corner and would not be right in front of me, wouldn’t it? Questions about questions. Please for help, that’s certainly very easy for you to answer.

Hi! Unfortunately I am not so familiar with Carhifi! I drive an alfa Romeo Spider, in which there is not all too much space! What do you need for a reasonably reasonable plant?

good evening, as soon n new car is coming up, or I take over from my father, my whole audio-ware (which has been standing in my apartment forever, ash above my head…) is supposed to be installed in it, and to some extent reasonable. I want to put all my questions in here so that I don’t always open up my own thread to every crap. in electronics it’s the following —> I’m the electronics and here it’s all supposed to start from the front and from the back I would like to ask the question, where in the case room the two end stages + the two caps should be installed. the sub already takes a lot of space away, so I would like to have something about in the case room.That’s why I have 2 ideas: 1.each one end stage at the two sides of the case room, somehow with a mdf plate or so fixed?! 2. as you can see here, there is a whole lot of space in the spare wheel chuck.if I throw out the wheel, then everything would have to fit in there easily, wouldn’t it? what does this look like with the ventilation? should one then also lay out the hollow with mxm mats, or is this rather superfluous? hope to answer some mfg stunt

huhu, I’m just playing with the idea of replacing my front. as ht I would like to use the carpower domis. tmt is not quite clear yet but either the phonos remain or there are two hertz hvl. anyway, I don’t have any softness for passive separation anymore. active fumbling is also out due to lack of filter option. what or how could I drive the two chassis?

hello am looking for a “loud” tmt or a kikbass I now have a phonocar 3 way sys 2/737 ; 2/311 ; 2/312 but the tmt didn’t 100w but 85w , but I don’t know how he is and on the hp of phonocar there’s nothing to find or I’m too stupid so I’ve got her now on a ph545 pinned but as soon as I found a new one fly out and we’re against an eton 1054 or similar etched ach and in the trunk I have an odaiko 3000 on an eton pa-2 802 so if you want to know anything please write for really nice mfg moyo

– What do you need for this (CanBus adapters?) and what do you have to consider? – Who has useful tips and tricks regarding the installation of cables (power cables, speaker cables)? – How complicated is it to install a roof antenna and to install the antenna cable (vehicle has head airbag)? The previous concept includes a partially active 3 way front system controlled via a 4-channel power amplifier and a Sony GT 700. HU is already available, for example speaker and power stage you are welcome Post suggestions or recommendations. But if together the pain limit of 700€ should not exceed and definitely be new. As a power amplifier I have so far considered an Eton EC 500.4., loudspeakers I have thought of so far only a 10er 2-way system (possibly Eton or Rainbow) and a 20er (evtl Hertz). A subwoofer is not intended for the time being, but will possibly be retrofitted at a later time. MfG.

Hello, I’m just about to connect my power amplifier. Have the supply line and mass already connected. The chinch cables on the opposite side too. I have attached the control line to the ignition plus that’s right? because I don’t have a remote connection to my radio…! The power amplifier has two chinch connections Why?It lights up a green and a red Led in operation, but no sound arrives at the boxes! I have to bridge all the outputs of the power amplifier so that I connect the boxes Is it possible to eat?

Hello, I would like to install 16 loudspeakers in the front. I need doorboards for this. I don’t want to have any unusual individual pieces but which only fulfil their purpose. Shouldn’t be too time-consuming, otherwise the Borads are more valuable than the car. I’ve already looked at a few instructions, but these are always so super elaborate. I have taken photos of the door and the door panel now. Can someone tell me how to proceed now? Thanks… MfG.

Hy since I want to participate in the Db cap in the North Deeutschen Championship and want to be in the race again well, I have set myself as a goal to do at least 145 Db. at almost 140 I am z. But I wonder if I turn up my amp fully so gain 100 % and the bass boost 100% (e.g. gain 60-70% and bass b. 0% if I use it to shoot my sub? what happens to the signal when the amp runs at 110%? is the distortion soo strong that I no longer notice a clean wave omme or fly me the sub around the ears or ……. as far as my components are concerned. amp is a blue point gta 470 and the sub are 2x 12 atomic of eltax which should be able to withstand every max. 750W or 150 RMs is the maximum power of the sub or the RMS.