Category: Car Audio & Navigation Forum

  • Suzuki Samurai Extension

    Hello all of you, my father (me) bought a 13 year old samurai, I definitely want to do something about sound technology, but how!? In the car you have almost no space! The trunk is limited to about 15 cm deep, so NIX fits in! The series FS is a 13er in the footroom, probably widebands, since no HTs are installed! The biggest problem is that the 13er are located somewhere in the depths of the footroom, so you could use a lot of handicraft work. The doorboards are also not possible, because the door is so close to the seats, that you almost hit it there, and without DB which goes net, there is no depth! So the question, has someone ever done something about the car, or knows someone who can tell me where he has accommodated the FS meaningfully? Photos of the problem areas I can still post, but is at the moment nn bitl dark! Preislich habe i no idea yet, because it’s all about the general feasibility of the whole thing! Where to with the TMTs, the HTs and (probably impossible) nem Sub and the Amp! But you’ve already done so many things that seem impossible! šŸ˜‰ So all the possibilities (how stupid they may sound) go here! Thanks Dennis

  • Calculating BR pipe

    Hello, can someone tell me how I calculate a Br pipe how long it must be and what diameter.

  • Eton A1/Series 5/AA 165A

    I’m looking for new TMT. I’ve changed now from 2 to a 16ner per page, which is now on almost 2 kilos of steel now the A16W bore me somehow, especially should the passive be better, that wants to be i but net well… The three upper ones I guess on the list, because you get the needed relatively cheaply. but which of them is suitable for the fully active operation and is best? I can try them unfortunately net all. I think almost that the A1 makes the run t, of which actually everyone is enthusiastic Oh yes, to the AA 200.2! Thank you!

  • Alternative to Radion 12 BR 2

    I have installed the following amplifiers and bass box: TWISTER F2-300 2x 150 Watt RMS @ 4 Ohm Stereo 1x 750 Watt RMS @ 2 Ohm Mono 1 Ohm stable RADION 12BR-2 2 x Radion 12″ Subwoofer 2 x 42l Double bass reflex housing 2x 300/450 Watt Ā· 2x 30cm I play with the thought of replacing the box with something smaller because it takes away a little space, I would like to keep the amplifier. I am not so the car hifi specialist and I am looking for an alternative that fits to the amplifier. be as good as the 12BR2 is, is there anything smaller that makes just as much pressure? hear mostly Hiphop (no Techno….etc.) otherwise I would be happy about some suggestions. “…UpRockA…”

  • Final stage selection and cable cross-section

    Moin. I have to rely on your expert knowledge again. I need louder musi in the car again. I had a 1000. Pyle with self-construction Sub(800W) and rear storage installed. I gave away the power stage and cables when changing vehicles.So now something new has to come up. Since everyone is scolding about Toxic and Raveland sometimes makes better suggestions. Price so up to 250,- for the E stage and please specify with cable cross-section. Didn’t want to install 2 battery, ok?

  • Subwoofers for pressure?

    Servus people, a buddy of mine needs a subwoofer that is mainly aimed at printing. He actually hears everything so mainly Techno.- His power amp is an audio bank F2000 his car a VW Polo 6N His budget is 700 euro for the subwoofer WITH HOUSING, then still insulation for the car so and a Power Cap. I had to start with I had shown him the Rockford T1 from Wooferstore in the Krystek’s case and in addition a ROLLE insulation mat from there and a Powercap there he came to 759 euro, but somehow reacts there Keienr phone tells us no connection under this number???? Does someone know what is going on there? Otherwise times suggestions.

  • What front system opel astra? Damping door?

    hello , it is so far as I have saved a bit and I can now trust myself to my front boxes. what advice do you give me there. and how and what do I have to contain the doors? the speakers should make a decent level and above all be loud enough to be able to record it with the basses. and should everything not be too expensive. does it make sense to renew the tweeters or to build them into the mirror triangle? oh yes opera astra f 3 doorr. price presentation about 150 euron many thanks to jupi

  • What’s the value of the parts?

    Hello. I have a few car hifi devices that are now about 2 years old. What value do these parts have? – Radio: PIONEER DEH-P6300R (Mosfet 50Wx4) – Amplifier: MAGNAT Classic 360 (Mosfet Technology) (4x140W) – Amplifier: ULTRA DRIVE (2x170W UDA 2/170) – Amplifier: LANZAR VIBERANT VIBE 225 (2 channel mosfet) (500W) – Car Speakers: 2x IMPACT Car Speakers (Watt= ?) (REF 6530 079 N° 001799) I would be very pleased if you would give me a price (value) for each enumeration. thank you MfG Monze

  • Power consumption of a plant harmful to Lima regulators?

    Moin! Just a quick question. My Lima is slowly saying goodbye. Is a Bosch 70A from a 4 gG petrol tank. Was today inside workshop, because the light flickers and the Lima does not bring its 14V anymore. Was quickly hung up to the tester and then it came out that the Lima or the regulator is in the bucket. 13,1V only. Battery is still full in the green area. Could this possibly be because I turn up in between times neatly? A bridge 120.2 on a Hertz HX 300 I would have there to be next to front system + small power stage. Constructive answers are very welcome Thank you!

  • Amps burned?

    Moin, I’m trying to make it short. Car system retrofitted,2 boxes running over a small amplifier and a bassbox that also has its own amplifier. Suddenly, the fuse burned through in the thick + cable seat. Both amplifiers no longer switch on after renewing the fuse. Have dismantled all boxes and chinch cables, it’s just mass, + cables what comes from the battery and a remote cable what comes from the radio. Ignition is off, remote has k a 12 volts only the thick + cable has power. If I turn on the ignition, I have 12 volts on the remote cable but only 5 volts on the thick red cable ?!?!? Measured directly on the amplifier, but before the fuse on the thick red cable I have 12volts, as if the fuse does something but can’t. With the other amplifier exactly the same problem only here I measure instead of 5 fills only 1 volts