Category: Motorroller Forum

  • Purchase advice 25ccm

    As the title should already tell, I’m looking for a scooter.. “Yes, nice, many do,” I think now probably.. So now to me and my priorities.. I’m 15 years old, I’m currently doing the 25cc driving license and looking for a mofa to a certain budget. I’m unfortunately a bloody suspect and don’t know much about the matter (is still coming).. I’m looking for a scooter that is 1. suitable for big people like me (1.87m).. sat already with a buddy on the Aer Ox and that’s not possible at all! Another friend owns a sax or so similar in any case the model RX1. It’s definitely clear on that. 2. a good acceleration has since I live in Osterode a.H and there are some places here where I will come to stop.. 3. also open (No, not now.. but later as it will be for me (with class B) legal) has a good performance and also someone can ride on it at the back. 4. to buy in a radius of 200km I live in Osterode am Harz 37520, Lower Saxony and hope that you might help me to choose a scooter because I am, as I said, a bloody beginner. 5. I didn’t run 15k or more because I still want to have some more years of the scooter.. My budget is just under 1,000Euro.. however:”just less, all the better!” Thanks for your help and nice evening even more

  • Scooter doesn’t start or very bad, Flex Tech Fun 50, it’s starting to piss me off real

    Hello is the carburetor sitting on the cylinder or combustion chamber, or what do you call it ? sorry In any case, the room always runs full of gasoline so we don’t start. If you loosen the screws and pull the carburetor up a bit it starts. What can I do, control, renew ? Or knock the whole scooter into the ton. Slowly the muzzle full. Has only run 4000 km. gruss

  • REX 125ccm; Open CDI 125 .. ? More power ?

    All the one Rex 125 ( RS 1000 ) driving, and he thought he could drive 100, to be told; Is ́not ! Max. speed 79 KM/H Who really thinks to buy a new CDI on the Internet( I was once so stupid!) does not do himself a favor, because, some do not work at all !! I had bought a CDI, was exactly described in the catalog, but it did not work ! Look after several times back and forth, in and up Old /New, not . The old funtioned, the new This REX 125 / RS 1000 is throttled and, as some others have already said, thought more or less in the city area. There he is good at it and it is fun, But as soon as a Landstr, or a four-lane train comes where 80 or 100 are allowed, Uff, fear, one heavy truck after the other,,,,,..!!! I hate it! I also wanted to drive BAB, but with 78 KM/H, laughing and fire dangerous. Greetings to God Jürgen

  • Oil from the exhaust, where does that come from?

    Servus together, before 200km I have mounted a new cylinder, scooter drives 1A (Aprilia Sr 50 WWW with carburettor). But: Although the carburettor setting should be correct and the candle is brownish, it smokes out of the exhaust and it also comes out oil. The question: Where does this come from? When I assemble in the cylinder room I did a good sip of oil to prevent a clamp. Can that be that after 200km still is not outside?? t set, right? The oil that comes out of the back is relatively clean (i.e. still honey-colored). Since the scooter otherwise drives well, you can exclude the carburetor, right? Thank you

  • S6 Pro Replica Mounted, now the scooter only drives 30, HELP!

    Hello! I recently bought the sports exhaust from Stage6. (restricted) I also mounted it immediately. Only now I have the problem that the scooter no longer turns up (max to half) and thus it hardly or not at all comes from the spot. Max speed 30 kmh. Speed remains the same… I have the following Verbaut: 17.5er Dellorto, 4G Vario weights, Harder GDF and hard clutch springs. (each Varioweights tuning set 3.5-5G and clutch spring set (1000, 1500 and 2000) HD on the carburetor is standard 80 , got 90ger in it now What do I have to do? Please urgently for HELP! Roller ran with ori Pott about 70-80 kmh.. Thanks runner00

  • Big problem … he doesn’t want any more

    Moin Leutz I’ve been having a big problem with my Hyosung sb 50 cab for almost a week. he just doesn’t want to start. I’ve already checked everything cylinder, piston, membrane, carburetor, luff, and and and just not the engine block but otherwise everything resealed and scratched… the box gets spirt and a spark of ignition is also there only after some time kick gets the one misignition and skin behind out of the exhaust a small flame out… .. mass kaben I got, ignite coil have I also changed, and anner cdi checks the cables and also bought a new spark plug…. the only thing I can still imagine is that the light marchie might spin or the magnet switch that the cdi says where the ot is……I hope you can help me thanks imm vorraus 🙂 Speedguru HELP

  • Ignition problems at Aprilia SR50 Rally absolutely no spark on the candle, help is needed

    Hello together, have a ignition problem with my Aprilia. The spark plug has absolutely no spark and does not start any more. Have they now disassembled so that I have free access to the CDI and the other aggregates. Maybe someone already had the same problem and could give me a little help. How can you measure the CDI exactly? What value should the CDI have in Ohm? I am very grateful for every help. I think now first of all of the CDI, whether it is the cause I can’t say yet Please give me feedback or a description of how best to proceed. Thank you in advance for the answers.

  • Yamaha Grand Filano Hybrid – or ev. Rollerbuy 125 he

    Hello, I just signed up here… I have been driving a 45-inch electric scooter (Niu N1S) for a few years and am thinking about changing to 125. I rented a 125-inch Yamaha Roller (Grand Filano Hybrid) on vacation in Thailand, I would like to have it soooo – but I can’t buy it here so far unfortunately:https://www.motorradonline.de/…/ I asked Yamaha, but so far there is no information if the scooter ev. in the 2026s I could probably import it, but that would mean a lot of effort and costs, so I decided against it… Maybe someone here still has information about whether to buy this scooter in D-Land in the foreseeable future….? I like that he was very quiet, very economical in consumption, very comfortable to sit, great in the suit and I also like this retro design very much. I am currently doing the B196 driver’s license, so far I can with my A I am actually very satisfied with my Niu, he has provided me with faithful services so far – but I can never really drive a country road and the range is limited to the city trips. In this respect, the consideration is now up to me: – I keep the Niu until maybe next year the Yamaha is to be bought here (probably that I could save for that first time. At the moment I would have to borrow the money. and speaks for the fact that the Niu I’m just watching various Nius at the classifieds, so it doesn’t matter how dry bread is. – otherwise I’m thinking about getting a used 125 burner, and just saving until the Yamaha scooter is available for sale – and I’m thinking about whether I’ll exchange the Niu N1s for a 125 he Niu or a 125 he Tinbot (also an electric scooter). Maybe someone here has some other spontaneous idea, or would like to give me a support my decision-making? Thank you

  • Roller goes on in the cold, warm off

    Yesterday I was on my way home and all of a sudden he went out while driving. Not abruptly but stuttering and stuttering, like hiccups. Then nothing went on until he stood for a while I got him back on Kickstarter. At some point I could drive a good bit then the same game again from the front. So scooter at Ner forest entrance left and had to pick up. Today on the way home I wanted to try again. He spra. ng directly on with e-starter and could also drive again… then 4-500 meters further he started swallowing himself again and went out again. Now he stands at Ner other forest entrance and waits until I can pick him up tomorrow with the trailer. What could it be about? Would be grateful for the help…

  • Peugeot workshop mandatory for warranty?

    Is it absolutely necessary that the maintenance is done by a Peugeot dealer/workshop so that the 24-month warranty applies? Or is it enough for a free workshop to carry out the maintenance according to the maintenance plan from the manual? In the manual I did not find this out so clearly.