Category: Motorroller Forum

Hey I got a scooter the other day. Is it also very good to clean the carburetor. So only I have no external materials like e.g. carburetor cleaner, pressure air spray(or compressor) ,nozzle gauge, nozzle rubbing o.ä Does one happen to have any tips and tricks that help me clean the without these materials? Thanks already

Hello Community, I have a Kymco Agility 50 MMC at my door, which does not start at the moment, the problem: My kick starter is broken (that’s why I couldn’t test it with it, but parts are ordered) and you can only start the scooter by e-starter. Unfortunately, it only starts at the moment only by drill, since the scooter somehow doesn’t start by e-starter, but it still ran the evening before. I’ve also made a video of it: https://www.youtube.com/watch?v=oYuDYmfji6k LG Elias939

I bought my first scooter about 2-3 months ago. Kymco People 50S – new from the dealer. Now I have about 500km on the clock and the first service is at the door. My problem now: I’m already so fixed from the 50s, which I started recently with the open A-schein. I will probably be finished at the end of July, mid-August. I want to buy something new afterwards, but of course still have to drive with the old scooter until then. The service now probably costs k It’s worth it to do it? Or you can’t really get this 200€ when you sell it anymore. In principle, I do the service and sell the machine a short time later with maybe 650-700km on the clock. Maybe I can also stay under the 600 mark (service is probably +-100km), but when it comes to sales, it’s not so good if the buyer has to do the service for 200€ first.

… If I have a car driver’s license, but I have 100 scooters? Is the first time directly away from the rags? At that time about 12 years ago, when I had the Mofa driver’s license, it only became really sensitive about social hours from the 2nd time on etc. But how does it get lost nowadays with a class B driver’s license? Does it really matter if the scooter 60 or 100 passes? I have previously expanded the distance ring of my Sr50 street bj. 2006 and the speedometer was at the stop. it must have been so real 85. With distance ring it is according to Gps 55 and according to Tacho so 60-62. Thanks and gruss…

here my scooter Rex Rs 400 50ccm he has 4444 km down. When I got him last time he didn’t pull any more correctly than I gave gas he drove, but only 20-30 kmh when I gave more gas he bagged off and drove 5 kmh no idea what that’s about… carburetor is new cdi is new Battery is also good in shot as far as I can judge. I wanted to start him again over the kickstarter but had to fix that this was worn on the grooves and I got him so Cannot start

Hello, I have little idea about scooters, but I have an old Peugeot Ludix Snake standing around from an acquaintance and wondering if I can get it back in shape. After charging the battery, the scooter starts, but the oil lamp flashes in the instrument cluster. Is there something known here to fix the error? A short test drive showed that the scooter hardly comes from the spot, only with push I could drive a few meters, but the motor power was not enough to more al The scooter was standing around in the yard for at least 1 year in wind and weather. Can it be that the rear brake is jammed? How best to do this?

Hello community. My spin B05 BJ.2006 has power loss, as soon as I want to give gas, the speed goes down very low. As if it is choking off immediately. Yes it is called wheelbarrow^^ The spin now has more than 37,000 KM down. New cylinder is 4500 KM old. Carburettor I have changed several times but without success Only from 30-35 KMh it comes into motion. The spin drives on incl. approx. 52 KMh…LOL distance ring no longer in… no lockup but at 52 KMh is over! Neighbor is policeman and checked it for me and everything is fine. I suspect that the compression has to be adjusted. But how do you do that and especially where?I checked: Carburettor: Is clean and nozzles also. Air filter: quite new and OK. Benzine hose: is new.Benzine pump: Is healing.Benzine filter: Is only 3000KM old…without dirt. Krummer has been cleaned with a long bottle brush. Stainless steel exhaust is 12,000 KM old and still ok. (No rapping) Someone knows how to use the compress ion adjusts or is there something else that I should check? LG Celestis PS: Colleagues suspect the membrane but how to clean without completely disassembly?

Hello, MBK Doodo 125 this morning no start possible, only calck, clack, clack. Battery completely discharge. Voltage approx. 8.4V Expanded, oh shock all cells almost empty !!! Dest. Water filled up and hung to the charger. Rescue attempt. After a few hours of voltage again Ok. 13.2 V battery built in, started and voltage measured with running motor. Hammer, 19.2 Volt then switched on with light still 18,0 V Much too much voltage that increases when giving gas still something. Is this now due to the voltage regulator or is there any other fault causer ???? Who knows each other from ? Greetings

Hello, I am recently proud owner of a brand new Peugeot SF3 LC 50ccm. If I take the gas away at e.g. 50kmh, e.g. red traffic light, and let me roll out, then the speed remains quite high for quite a while. Only when I have reached so 10kmh, the speed goes into idle. It feels as if the clutch is still gripping and the engine brake slows down the scooter. Is this normal or do I have to go to the dealer again? Or differently asked if I walk away from the gas, Then should immediately disconnect the clutch and the scooter go into idle? Is the engine lubricated enough if I take the gas completely away but the engine runs even faster? The scooter is cut off (Vario).

Have finished my scooter (Baotian) for the summer, so maintenance. Everything in locating,only the e-starter is not possible,but this has been for a long time,but didn’t bother me,because the scooter starts with 1-2 times kicking. I don’t know what came in my head,but look why the starter doesn’t work? A large construction site was built up until the whole fairing parts were dismantled. Starter relay on the load cables bridged, starter goes. Control from the relay, brake pulled arrives 12,6 V,Start he pressed other side 12,6 V but doesn’t attract.Magnet switch broken? Have some more,but the same game. Taked 1.5 light cable,you can put it nicely in the back plug and start directly on a battery,Roller. I stood like an ox in front of the mountain, everything goes,the control etc.,just he just doesn’t start. No matter what and where I measured,I didn’t find the mistake and yet it was quite simple. What do you think it was about? Resolution tonight!