Category: Motorroller Forum

  • Junak 806 125ccm Tips/Experience

    Greetings to you people I’m thinking about buying a Junak 806 125ccmhttps://www.ebay-kleinanzeigen.de/…/630306773-305-1742?… My questions 1. Is the price justified? 2. Tips regarding doing the acceleration 3. General experience with the brand and the life of the scooter Thanks

  • Kymco Like 125 2013 repair itself

    Dear community, unfortunately, my Kymco Like 125 on the highway broke when driving fast, and suffered a motor damage. Oil was actually changed a year ago, but supposedly no oil was present in the engine, and the problem was the piston and much more. How realistic is it that I get it repaired without experience? I don’t know what to order, nor how to screw it together. The only thing that exists is my interest in getting it to r If it doesn’t work, it doesn’t matter anyway, since it’s already broken. Would you try it or where would you start? Thank you and love greetings

  • Questions on Variomatics

    Good evening, I bought a scooter a short time ago. It didn’t jump on or the engine ran short and the belt also turned short but the scooter didn’t jump on. I try to describe the problem to you. I wanted to remove the variomatics and first solved the screw. Using my pictures you can see that in front of the disc with the teeth what is black. Isn’t there a disc missing? In any case we can’t pull down the variomatics It looks like a kind of jack. I think it’s due to the variomatics or clutch. When I turn on the clutch the wheel also turns along. Back to the variomatics: On the shaft on which the variomatics sits on it is like a self-cut thread for the screw on it. After 2 hours I was superior with my Latin at the end and did not have the right tool I hope you can understand everything and help me. LG

  • SH Mode 125

    I just looked at honda on the page…a new one? scooter, cheaper than the normal 125 ́er…what does honda want to achieve with it? looks chic, except the pink of course…

  • Speedfight 4 bj. 2021 no longer starts ..

    Hello guys I have a problem with my Speedfight 4 Roller bj. 2021 since exactly today. It is the latest 4 clock model which no longer has a kickstarter installed. And it ran yesterday still impeccable, today it just does not touch any more. When I turn the key all the electronics goes on, everything works so far, but I want to start it just nothing happens. It clicks nothing, it ratters nothing, it’s exactly as if I didn’t bet the start button For some reason, I believe that the brake light is always shining, but I don’t know if it was like this before and turns it off as soon as it starts. The battery is still good, it is also driven every day, so it can’t empty itself at all and as I said, all the turn signals and so on, it just doesn’t start anymore. Now I don’t know what to do, the next workshop for motorcycles etc. Is 2-3km away and I would have to do it then. Rt push. Has anyone tips what that can be. Would really be great!

  • Manufacturer Unu Scooter is Insolvent!

    The company has filed for insolvency. Reasons for the insolvency of the Berlin company are increased material and transport costs, higher operational costs and the strongly collapsed demand in the course of inflation, according to Unu. Source: https://www.spiegel.de/…/…t-a-604b6f05-88fc-45b0-8fa1-f355bf7f2141 Too bad, but also had serious problems with the technology. Only the recall from the battery of the Unu Classik went well into the money. I’m going to go on.

  • Sym Fiddle 3 50 Front brake hose blows up

    Hello to each other, a few days ago during the ride I was able to push the front brake completely at the traffic light. I first thought that it was due to lack of brake fluid and have just replaced it (was also little in it), but the problem persists. Now I have found that when I press the brake the following happens:https://www.youtube.com/watch?v=1B2WJDwptak&feature=youtu.be If I drive then I can press the brake normally again until i As soon as I have driven a few meters again, the brake is back to normal. If I give gas on the stand, it doesn’t work, only if the front wheel really rolls the brake goes again. My guess is that maybe the hose has a crack and therefore air escapes? Can that be? Or what can that be?

  • 2 clock motor Turns up by itself

    Moin all together, I’m new here and I have a question. With my Kreidler Dice SM 50 LC the Bowden train is torn at the gas handle. Had taken the slider out of the carburetor during the repair process. As far as so good. Machine drives again. Now I have only one problem. As soon as the machine is warm, it turns directly up to 7000. What could this be? I already thought about the stand gas. But that’s not and so slowly I doubt. Thanks in advance for the answers.

  • Electric scooter recommendation?

    Dear forum, who knows about electric scooters and can recommend me a good scooter 50 if possible in retro look? What do you have to consider with regard to maintenance? Or is it not yet useful to switch to electric scooters? I drive every day in any weather 15 km. Thank you

  • 125 cm scooter tunen

    I have a cnen China scooter. ( 125 Kubik) This has 6 kw, ie 8 ps. Allowed are 11 kw at 125 ccm scooter and max 110 km/h. How could you tune the scooter? It’s about theory, is not worth it and I don’t have a lot of idea. Installing a 172 ccm malossi is illegal, because over 125 ccm. Therefore my question how to get legal 11 kw? There are indeed scooters with 11 kw which go much better. Enough it another cylinder ? install and remove the carburettor. immen , or do you need everything new ? Why are there so big differences in performance ? Since I ask for advice . As said it is about theory , because I can classify the connection bad . A breath you have to let the tüv lose and register with the insurance . Do I also see this right ? Please no comments , buy a faster , that’s not the question here .