Hi together, I’m short, I bought a b196 and would like to buy a scooter now. I’ve calculated and sorted out 2 scooters for a very long time. The Honda Pcx and Yamaha nmax. The yamaha nmax is supposed to be more splashy but I like the look of PCX better. And with PCX the handlebar should touch the legs and at nmax that would be no problem. I’m 190m tall and could not test both. I called yamaha and at Honda unfortunately both dealers kei n only for the test drive. They would seem to be very popular so that they would be sold immediately. Does not have to be a new one therefore look at small display also there I found none that is less than 350km away. Anyway I saw the pcx 125 2021 model and am about to order before. Now I wanted to ask you what you think about it? No test drive made and blind pre-ordered? And have a problem in general, unfortunately I don’t have a garage. in electric 45’s scooter that was always standing in front of my house door. Because I couldn’t park in front of my house door because it’s a combustion scooter. They don’t have an alarm system, and on my street it’s not very bright at night. I hope you can help me somehow. Thank you
Category: Motorroller Forum
-
Tgb Bullet ONE Cushion From the exhaust after cylinder change (does not start)
Evening men/women, I have a problem with my bullet and hope you can help me Unzwar let him push himself at regular intervals two weeks ago sometimes hard and then again normal. (Heavier pushing was constant at the same turn there) On the same day the scooter also did not go as well as he should and then he had 2 misfires (2 moderate loud banging) and drove still something until then he went out and also no more on 1 week later he jumped like I had to install a new cylinder kit the day after, and from that time on he didn’t want to… (cylinder etc everything properly installed, properly sealed around, piston rings, nail bearing) I tried everything (bramsenreinger,etc) At some point he started then when he started it regularly hissed and pressure came out of the exhaust. Zünd funken he has and bezin arrives too. Zündkerze ich ich auch schon And is perfect deer brown Now I don’t know any more and hope you have an idea. To my Bullet 13500km Everything ori except: Leovince zx defrossed. In the last 2000km I renewed clutch gasoline filter+sleeves Zk V-belts Greeting Tabs
-
Roller does not start – Keeway Hurricane Easy 50ccm
Hello! Hope you can help me, don’t come any further. I bought a keeway Hurricane easy 50ccm used( didn’t run at the time). What I’ve already done: 1.Compression tested 6bar, 2.Zündfunke available , 3.Benzin tap tested (sucked on the underpressure hose) works. 4.Both shaft sealing ring replaced. 5. Petrol and oil tank cleaned 6. New hoses 7. Carburettor (leader) cleaned in the ultrasonic bath open all nozzles, rubber stops even when I move swimmers. P ROBLEM: Neither manually nor with kickstarter he wants to start, petrol comes but, see it full on the hose float chamber. When I spray on the carburettor (Lufi side) brake cleaner he goes to, puke already please help. Thanks in advance.
-
Yamaha Axis 50 light bulb burns through
Hello, I have the problem that my Yamaha scooter has already burned through the 2nd light bulb within 2 thousand kilometers. It is a 12V 25W light bulb. I used to measure with the multimeter at the frame of the bin and be able to measure almost full throttle around the 15-16V volts. Someone has an idea where the error might be, because I would have said now that the rectifier has one away. LG
-
Roller Purchase Peugeot speedfight 4 – 2017 2 beat – Questions
Hello the following: I’ve had a Sfera RST for 1 year and there’s always something broken, I paid 650 € and now I put a good 700-800 € in it and it has to be done even more, the problem is: I have to have people who do it all the time, so it’s time to close it… the following: I want to buy a second scooter so that I can screw around on my Sfera and teach me that. Now I’m recommended to load a scooter around the corner https://die2raeder.de Es i a master workshop that were often represented on scooter races/events and know really what they are doing! I have a scooter in mind and the speedfight 4 2017 as LC version in the maximum equipment version no 7000 KM 1 year warranty for 2190€ The good thing is that they can bring the scooter even to 55 km/h (gps) so I am not a barrier and 10 km/h more nobody says anything with car driver license. iw ill just finally have peace and not every Woc What do you say about the scooter/price? https://www.kleinanzeigen.de/…/2649438198-305-1446 Is the scooter good?
-
who has experience with Kenda winter tires ??
Hello, I’m getting ready for a 2008 rex RS450 as a second and winter scooter. Since the scooter is still on its original tires there is a change more than due and since the winter is at the door there are some with M+S identification. Purely priced are VeeRubber VRM351 ; Kenda K415 ; Kenda K701 and the somewhat stollier IRC UrbanSnow EVO interesting for me. Is there anyone who has already had his own experiences with them, event. also with several of the mentioned and nen real P can give opo-comparison?
-
Roller leaves after approx. 2 -300 meters
Hello A colleague of mine has a problem there. He bought the part …. a (optical) beautiful 125′ scooter … Chinese design (grins) last year, and was also happy with the part, now the following happens….Roller starts well, but drives only a short distance (about 2 to 300 meters) and then goes out again. I know…. the error description is very poor, until not present. But does something happen to you anyway ? Greeting Helmut
-
Drive with snoring sound failed
Moin together, I just lost my Pegasus P50 on the country road. Engine is running, but something seems to have broken at the drive. There was a snoring noise, drifting away. Then the snoring noise was gone, sounds now, as if the engine is running quite normally, nothing more at the drive. I can’t say more, just wait for the tow truck to bring the box home. I bought the part used, ran quite fast (so around the 65 k) m/h) without obvious structural changes. Guess it was “only” taken out the throttle. Do you already have an idea? I don’t have a lot of idea about rollers. Thank you and many greetings Olli
-
Change Peugeot SV50 to mixture
Hello I have bought a Peugeot sv 50 with 56,000km The previous owner has driven a mixture because the oil pump had acknowledged her spirit and had suffered a Kolbemfresser. Since then he mixes 1:50 I now have to drive a longer distance with it from 100km country road. I have unfortunately no experience with mixture because of my question Do I have to change the mixture so drive fatter if I drive perennially or do you have tips for me???
-
Roller starts hard after 24h, under 24h no problems
Hello! I drive a Sym Mio 50 (50cc) and I have the following problem: As soon as the scooter is unused about 24h, it doesn’t start properly. After starting it sounds like it doesn’t get enough gasoline and it is soaking off. After 2-3 start attempts it starts. Then I have to give about 10 sec. slowly and rhythmically gas until it is completely there. Then everything runs wonderfully. If the scooter is for example a little less than a day, it jumps directly on and without problems. Only after approx. e in the day this phenomenon occurs. I have already removed the carburetor and cleaned the float chamber, float valve etc.. It does not seem to be there. Does anyone have an idea for me to look at next? I don’t understand exactly what is happening here so that the whole thing always occurs after about 24 hours. PS: Ambient temperature on the day: 32°C at night: 30°C I am grateful for every tip! Best regards