Category: Motorroller Forum

  • Electroscooter – IO Scooter Florence

    Hello I play with the idea of possibly buying an electric scooter to use for small injections etc. I also wanted to venture into areas of the alternative drives: Now I have discovered this scooter:http://www.io-scooter.com/index.php?… There are probably two versions: – with Siliziuim-Gel batteries – with Lithium Batteries German dealers are mentioned there, but there are nowhere prices, although he should come on the market already this month. I take the Li-Ion versions will have a significant extra charge than those with silicon batteries, is that worth it in terms of durability, range, weight? Does anyone have any further information about this scooter? Since the scooter is a China crasher in fact, you can certainly say something about reliability (mainly batteries and motor) and performance or? The technology is probably the same with other electric scooters (?) Actually I had before a 4-stroke Retror ala SYM Mio, but I would still have some money left to venture something else. And in the maintenance it costs clearly few, so this can pay off again compared to a petrol scooter. (?) Thanks for your tips and advice! Gruss Wanja

  • Kisbee no petrol or “surrender” at ignition

    Hi, I have a Kisbee 4T injector. Due to illness the scooter stood in the shed for about 6 months with my father. Before that he ran wonderfully and without problems. In July I had started him again briefly, so that he runs something and to see if he still starts. Today I wanted to pick him up and drive with it again. But he does not start. Ignition, starter etc pp run but then I noticed that in position “ZÜndung” the known surren is not to be heard. Petrol pump? How can What else could it be, or what could it be? At “defense”, I hear a soft click from the air filter area. And after 5 seconds, when the engine light goes off, a soft click from the front. But no surrehen, which I have always heard.

  • Carburettor and stand gas adjustment/Explorer Speed 50 (“ATU”)

    Hello and good evening, I screwed up and deeply regret it! And I bought a scooter at ATU a few days ago. The model is called “Explorer Speed 50”. I adjusted the carburettor and stand gas adjustment and I can’t do it anymore. What’s the “works setting”? I have to turn the carburettor screw in and then how much back? And stand gas? I have changed the whole thing because I had read that you change the settings in winter so ll. Can you please help me? I have really tried and need your help. To be honest, you are my last hope! Thank you very much!

  • Your experience of Yamaha Neo’s 4

    Hi, everybody! I wanted to ask you a few questions about the Yamaha Neo’s 4 (fourth-act injection) experience. I’m interested in this scooter, which came out with Euro 4 (with Lambda regulation) this year. As far as I remember, a call back was given because of the engine suspension and the gasoline pumps got off during heating, otherwise I couldn’t find out any other occurrences. What are your experiences with Neo’s 4, de r has a real electronic injection (suction tube injection) and three valves. How do I drive in your opinion? What do you think about the engine? Did you even have problems with the model? I would be happy about feedback! Thank you very much.

  • 4t carburetor can not be set, please for help

    Good evening, I have a problem with my Jinan Quingqi QM-50QT-6A. The carburetor cannot be adjusted, I turn the mixture screw in (so too) then the speed rises. But if I turn it over 3 revolutions Out he just dies off. I don’t know what else to do, I have repeated it a few times and I don’t want to succeed. I bought a new carburetor and with the pass exactly the same thing. I am grateful about every help. Lg

  • scooter no spark

    Jack fox jack fox HALLO AND GOOD ABOVE HERE IN THE FORUM : I HAVE A QUESTION TO YOU ; BREAK UNEMPLOYED HELP: HOPE ME CAN HELP ANYONE AND WHEN I HAVE A JACK FOX GT 50 2 TAKT ROLLER THE PROBLEM IS PRODUCED BY THE ROLLER NO CUSTOMERS ::: HAVE BEEN ALL NEW LIGHT MACHIES NEW CUSTOMS PUBLIC NEW CDI SHOULD BE THE 2nd EVERYTHING FUNCTIONING FREE OF IMPLEMENTATION FROM THE NONE CUSTOMS FUTURE ; HAVE TO EXCLUDE TODAY THE GROUND CABEL WHAT THE CABEL OF THE ZUNIFUL THE CONTACT CALL ON THE SIDE STANDARD ; IF I WANT TO BE A MULTIMESS GARENTH THERE IS THE MESSGARENTH WHEN I HAVE A FUNCTION I WANT TO HAVE THE MESSGARENTH ABOVE THE CUNTAIN WHEN THE CUNTAIN WHEN I WANT TO BE ANYTHING TO THE IWIEE NO STROM FROM THE BATERIE THE WHEN THE CAB HAS BEEN A CONTRIBUTION AND THE IO IS: I THINK THE STRUMM THAT THE 9 VOLT BATTERIE FROM THE MESSGREENTH HMM SHOULD BE ANYTHING CONTRIBUTED TO THE MEASURE :: NAJA I WHEN NOT ANYTHING MORE MORE HOT ME CAN HELP THEM ::: FURTHER QUESTIONS PLEASE SCREAM

  • Bluetooth headphones under motorcycle helmet

    Hello, I’m looking for some reasonable Bluetooth headphones that fit under the helmet without pressing them. Would like to use these earphones via a mobile phone app (Mapfactor Navigator) as a navigator and sometimes listen to radio about them. At the moment I have these in my eye: https://www.amazon.de/dp/B01FYTRSC4?psc=1https://www.amazon.de/…/ref=cm_cr_arp_d_product_top?ie=UTF8 However, have the fear that these might be too clumsy !? Have you had experiences and can contact me recommend something suitable? Would not like to spend more than 50 euros, otherwise I can buy a helmet with an integrated headset.

  • Checklist Preparation 的 The most important parts after long standing

    Hello together, a few days ago, thanks to the help of the forum, I got my scooter to run again and that as a total loan ???. I have to drive 25 km daily from June with the scooter to work and have some fear that it will give up on the way over the next months. What things would you work off first to ensure that no problems on the way to work occur? I would very reluctantly come too late. Things I have already done -underpressure tested – petrol replaced – carburetor cleaned things I will still do the days – brake linings – tires replaced. Is there one side on which you can buy cheap used or new tires? (all weather) -replace spark plug -replace gasoline filter -my scooter owns an oil filter (probably the front seater has slurred one in between), can I simply replace it with a petrol filter? It is a speedfighter 2 which has been driving for several years without problems w after cleaning the carburettor he ran again. At the exhaust and the springs rust has formed, would you remove this ?This look is secondary for me The best as cost-effective suggestions as possible ????? dear greetings and thank you

  • Air filter allows much too much air. ( 2-stroke, 50cm )

    Hello, I bought a used spin GE 50. ( 2 measure separate lubrication ) The mileage of the scooter is 2800 kilometers. It stood a few years in the dry. After it did not jump, of course, I changed the petrol and cleaned the carburettor. I also installed a new battery. I cleaned the air filter and also closed it properly so that it is tight. I also installed a new spark plug. It starts now. I then looked and with my finger almost kept the intake nozzle of the air filter. After that I was able to bring it to full speed without any problems. Now I have closed about 80 percent of the air intake with package adhesive tape now the scooter runs loosely 45 to 48 kmh although the distance ring is installed. But that’s no solution. Has something happened to you before? I already tried a new filter mat, but it allows for even more air. Please send a greeting from Berlin for ideas or solutions.

  • Roller meeting from 125 ccm, room NRW

    Hello to the forum, since I am now four weeks a Gilera Runner 200 VXR possessions , have I thought if there are still a few nice people who drive such a scooter and want to have a trip together sometimes ? I for my part often nozzle around alone , since I do not know any other people who drive also a big scooter . But you should also this thing a bit narrowing down , so nothing against 50 ccm scooter driver ( had earlier a ) it should be i 125 ccm. Would like to see how the resonance here in the forum is like that. I come from room 44577 and maybe there is one or the other one that goes the same way as me. It would be nice if a few people would find themselves for the sake of gas fun and common exits. If it starts well then you can make an appointment at short notice.