Category: Motorroller Forum

Hello all, I drove an X8 125 sample today and found that it fits me quite well, from the size and there is also a lot of space for helmet and jacket etc.! Now to my question: I am still unclear whether I should get a 125 / 150 / 200 / 250 or 400er??? Would like to buy a good used one, or a cheap new (with daily registration e.g.), up to maxxxx. 4,000 Euro! I live in the room DGF, which also my number plate reveals! I have already 8 pieces from mobile.de, which are located in my surroundings of 150km! Which models have good engines, since e.g. the 150er has less horsepower than a 125er? Greetings Herbert

Hello guys, on my Aprilia sr 50 Street I built “Angle eyes” headlights on it worked great until solid wiring also. Only now I have the problem that the turn signals only light up when the Led’s of the Angle eyes are on. I connected the Led’s individually with a switch and connected with rests to the battery. As soon as I turn off the Led’s the turn signals no longer go and the light on the roller is insulated when I turn them on everything is back to normal where can it be that the turn signals only glow when the Led’s are on ?

Hello community. As already written. My Typhoon doesn’t want any more. I’m admitted > With the nerves at the end. I think I’ve tested pretty much everything there is to test. I’m curious if anyone else has any idea. So – It’s about a Piaggio Typhoon (TPH) year 2004 with 19500 km on the clock. He spings. Also accepts a bit of gas. Accompanied also on approx. 15 KM/h. If now the Choke closes the nozzle after approx. 1 minute he loses stak in power until he abst What I’ve already checked! – Carburettor cleaned 3 times. Bemser cleaner – Press air – – New candle – New CDI – New membrane – Behind the Variomatics cover everything is “dry” – Intake nozzle is not brittle – Exhaust piped. It easily allows air through – cylinder disassembled. No Riefen – Piston rings O.K. The engine was running I moistened all rubber parts with brake cleaner. No speed change. Compression 6.2 bar. No great value. But should be enough. Now bin ic h completely with my whiteness at the end. Does anyone still have an idea what the box has? Thank you 🙂

Hello all, I have a nice Rex RS 450 and have a tiny problem. xD The little one does not start as described above. He does not give the normal start sounds of himself and starts. I have already done the following: – spark plug tested and changed (Zündfunke is present ) – carburetor cleaned and a new one installed (because the old defect was ) – battery replaced with a new one – the inlet and outlet valve re-set (Inlet: 0.05 and outlet: 0.10 ) -Hab e checks if there is water in the engine as well as if the piston rings are still top (no water and rings are top ) -The petrol filtered and an oil change made And now I am with my Latin also at the end. Could you perhaps help me to get him to run again? The following, he stood about 1 1/2 years in the barn and is built in 2006. Greeting Dominik ;D

Hey guys, I’m 14 and I want to be 15 or 16 whenever you can make the appearance… buy me a scooter that drives about 50km/h it shouldn’t be Korean shit, it should be something good… besides it should cost about 800euro (so probably used) and my type scooter is the sportier variant…

Hello dear scooter drivers! I wanted to buy me a 300 Nexus at the beginning of the year. Red was only available from May and I bought a motorcycle again. However, since I drive 90% in the city the motorcycle was just too stupid for me, no storage space etc … Now the X7 has turned out to be from an acquaintance and I hit right there. The 300 engine runs very well and is also very economical. The scooter is in best condition and has just over 2000 kilometers up. If I am looking for accessories on the Internet, i.e. exhaust and co, I always get only parts for the 250s i.e. I could not get in touch with a Piaggio dealer yet. Does anyone have a suitable address from you ? Austria or Germany would not matter to me. Thank you ! LG Alex

Hello, since last year there are also scooters in Germany, which run with gas, i.e. car gas. I am only a little irritated:www.jackfox.de offers the scooter for 2,299 EUR, via shipping houses (source etc) for 1.999 EUR. Soon the discounter “Plus” wants to sell the gas scooters also, for as the write, “Discount price” of 1.999 EUR.www.group-asc.de offers the scooter for 1,699 EUR. How does that work??? I would like to buy a vehicle like this, but do not know if I am at Que lle & Co should order, or at ASC…

Hi, I was still working on the gas train throttle with my Piaggio NRG MC3. Was a fidget to get the throttle out and put the whole thing back into the carburetor. Finally I managed that and wanted to do a test run. I then tried to start it by e-starter but he didn’t want to start it. Very briefly at the beginning it also sounded like the box was starting but then it didn’t start. Then I got it all rough again. Taken to see if the gas train might have jumped out again, but it still sat the same way I put it in. So everything was back to the carburetor and tried again, but again nothing was going on. This time it didn’t sound like it was going on at the beginning either. What could the problem be? Did I maybe use the gas train wrong from the beginning?

Hello all Rollerlover, what was your first scooter??? Which model?? I’m especially excited about the older ones here :-)) lg

Hey people! at the moment I’m looking for a price performance qualitative scooter! have heard that the dinger are not the charmer at real! what about a scooter at atu? they have in the mom which for 1000€ in the offer! do I get something better for my money? I wanted to spend around 600€, however if there is no money I am willing to spend more! thank you in advance