Category: Reifen & Felgen Forum

Moin, So I’ve got shiny rims (MAM8-8519) and I’d love to polish them first (grain from 180-2000) and then with Farecla G3 1+2. At the end I’d like to use the aluminium/metal polish from Dr. Wack. You’re probably wondering why I want to grind the rims, the reason is that Tuga Alu devil (red version with acid) + the winter have attacked the rims very strongly and can now be seen small dots that can’t be wiped off. LG macjet21

Servus together, I’ve seen the Michelin Alpin A5 in size 245 / 50 / 19 105V since last winter. When I was washing the car after the holiday I noticed bubbles on two tires. We can’t remember ever having driven over any obstacle (Bordstein or the like). The tires are almost new (max. 6.000 km). Has anyone ever seen this in the form? (I don’t) Thanks in the round!

Dear Forum, Currently I have a question for my Audi rims. Currently I have a front and rear skirt on the passenger side, I ask myself, if I put my all-weather tires on it next week, if the salt can eat itself over the winter months …? Anyone experience with my current condition Condition of the rims, can you leave it so winter-over or rather seal/repair it? Is there any tools to do the same from the internet? he prefers to become a professional? Thank you for every help and a nice rest of Sunday you!

Hello together, as always my stored wheels have changed at my very renowned tyre dealer on site. From winter to summer logically. I always clean the rims shooting, although a wheel wash takes place at the dealer. I noticed that a tire has an extreme cut in the tyre flank where also a piece of rubber hangs around. Another tire is also snapped off on the rim protective strip of the rubber. Both tires are actually not for me I then informed my tyre dealer. He looked at this and said one tyre had to be changed, with the other one I could continue driving. That this was overlooked when changing on the same day is a scandal. Of course, mistakes can happen, but with safety it will be difficult for me. At least when looking at the error was noticeable. There was hardly an excuse and there was no agreement either. dealer on site, where I have otherwise felt well taken care of, all doors open to at least apologize. Instead, I have to listen to myself that you have to notice such damage yourself. Yes, you may have to be aware of this damage while storing and reassembly. I am pretty angry and will change the tyre dealer. My previous was also not the Cheapest. Heisst not expensive in reverse is also better than gün I drive the tyre size 195/40 R17. This is a pretty stupid size, because there are hardly any alternatives. My tyres are from 2020 and still have 5-6 mm profile. the car is moving about 5 tsd km a year. half summer/winter. I now have an offer where I can get 2 same tires (Goodyear EfficientGrip Performance) from the same year of production (2020). Also these have still 6 mm profile. Since there are only China Buller and then only 2-3 brand tires which however also shore now the question is whether I take 2 used brand tires from the same year or which 4 China bulls. At the annual running performance I am somewhat unreliable. Besides, I don’t know what it’s like if 4 years old brand tires are better than 4 new no name tires. What do you say? Thank you!

Servus, I find unfortunately Nix about my rims which I bought last week. The rims are made in Germany but have no KBA number. On the internet there is almost nothing and I don’t know if they can be inspected without KBA, part and ABE entries. Can someone possibly help me find the KBA number or if someone has sent me the rim number possibly. Pictures of the rims are also there and the inscription inside With kind regards Ben

Hello together, I hope you can help me, since I am not familiar with this topic and have found no suitable answers online. To the problem: My mother’s car (BMW F31 320d) was recently installed at a car workshop all year round tires. These are the following tyres: Front: Dunlop AllSeason2 225/40 R18 Rear: Bridgestone Weather Control A005 EVO 255/35 R18 94Y The tyres were mounted on the original BMW rims. The driving behaviour is wall-to-wall My question: When I wanted to check the tyre pressure today, I noticed that this tyre or size combination is not listed in the tyre pressure table in the driver’s door. Also in the approval documents that I found online, I could not discover this combination. Did the workshop possibly install unapproved tyres? Do you need a special registration or approval for this combination? Which tyre pressure is suitable for these tyres? I have m omentan set front and rear 2.4 bar. Or can I let my mother drive with this tire combination carelessly? I would be very grateful if you could help me here. Thank you in advance and all the best! Best regards!

Oh now many will write again that we had already 100 000 times Still I have trouble So I wanted to change the Benz E 220 T now my winter tires and noticed on a wheel was no more air. I sprayed the rim with foam and found, around the inside of the rim came the air bubbles. Now I read on the Internet, from 2024 I can not drive the M & S tires all year round, which I actually intended – I live in no mountain area ( B Randenburg) Drive almost not over the winter months. Are there any other tyres that I can drive all year round ?????? Which tyres you could recommend to me. I would rather ask your experiences than a workshop Thank you for your answer

Hello, I wanted to ask what leads to heavy wear on a tire. I have two cars, one is a strong diesel where the tires on the drive axle are down after about 15,000km and a weak car with little torque, with similar mileage where the tires almost hardly drive off even after 30,000km (both vehicles have the same tyre size 205/55 R16). But what uses the tires so much, something the high torque when starting up (even without the tires d Or would a wide tire solve the problem?

Hello, I sell a set of winter complete wheels (Bridgestone + Alufelge (GMP)). Now I have a buyer who does not know if de Felge fits his car. How to check this? The following information about my rim: Brand: GMP Model: Swan Color: black diamond Manufacturing process: cast Weight: 14.90 kg per rim Saliva-refining: no winter suitability: yes Load capacity: 750,00 kg Front axle: 19 inch – 8.0 J, ET 30.0, 5/112 Rear axle: 19 inch – 8.0 J, ET 30.0, 5/112 From the manufacturer’s car, I know that this is a Mercedes A class from the 2018 series w177. Thank you in advance for your help!

Hello together, we have in the Hobby Workshop a Beissbarth MT 880, which unfortunately does not want to work anymore. After the BIOS battery was empty in the computer, probably the settings here have been lost and we are looking for someone who has the same machine to help us here. To the error picture; the machine goes up completely and then does not start with the initialization drive Thank you