Category: Sagt’s uns! Forum

Hello, in my blog I often create pictures, and if the weather is playing along, some of them will be added on the weekend. Up to now I always reduce them to 1024 width or corresponding height. Here on my 20″ iMac looks quite small. So I wanted to ask which resolution most users use here. If less than 5% are still on my way 1024 I would go with the pictures times on 1280 or 1400. And then another question about the bandwidth. I sit often enough in my blog Hotels on a very slow network, and then load a 1 MB file is not the true one. Decrease most of my pictures as usual from m-t 1.0 times to 150 kB. Here would also sometimes choose slightly higher values so that the images are not compressed too much. Greeting, Olli

Hello dear team, it would be desirable to have a “m-t meeting area” -> For brand-free meetings, regular tables and exits. Many users have known each other for years, change the vehicles, but stay true to m-t as a side and change only the subforum, but still want to meet with old and new people from the former areas. New and old users, also want to get to know drivers other brands, and sometimes look over the brand’s own plate edge. Users want to look like with the “unofficially” e m-t Stammtischen” via m-t exchange and spend together a couple of nice hours, with good food or kart/bowling, ! Please provide a platform for this (similar to the brand-bound meeting areas) ! Thank you and many greetings g-j

Hello everyone, today is ‘International Women’s Day’ – perhaps a good opportunity to think about whether you could/should not introduce ‘Themenstarterin’ or ‘Themenstarter/in’ or a choice between ‘Themenstarter’ and ‘Themenstarter’ at the opening of a new topic. What do you think about it? Is that unimportant? Or should that be self-evident? Would that be feasible at all? A beautiful gesture towards the women in the Forum would be as I think. Crazy – not long ago, we were pleased that the display of a theme starter was introduced at all… . Greetings

Moin Moin! When I wanted to replace my avatar yesterday, a kind of “accident” happened, which the avatar” picture () had the result, what you see now: a beautiful nothing. I was a little scared at the first moment, because I actually wanted a picture to appear there, but then I left it for the first time and found out over the course of the hours: What did I try about last night and see there: The “error” can be reproduced. I am relatively sure, that something like this is not necessarily wanted by the workshop, but before the “mistake” is discovered by the workshop and possibly stamped and abolished as such, I wanted to ask to leave it that way. @ Workshop: I am happy to tell you how I managed to do it with PN. I didn’t want to write it in the Fred.

Hello dear team, hello dear user, I noticed the following inconsistency -> The buttons like cockpit (i.e. white font on black background, as well as some ), in different places are blurred or blurred. Attention, not all ! The time at which I noticed this for the first time can no longer be precisely defined. Guess however, it should be 3-4 weeks ago. I can determine this effect, with my 22″ Samsung LCD, connected via DVI (FF3+XP+SP2), just as a n my notebook (FF3+Vista updated). On the work we have among other things an old tube monitor, also I notice this ! Hmmm, please make it again that it is sharp Thanks and many greetings g-j Edit : Also good to see on the “new topic” ^^here above the post, or here at the button “answers” (black on yellow) ! Edit 2 : Attachment -> At the word cockpit, C.ock is uncharf and pit sharp

Hello Leutz, don’t know how you’re doing, but before the new design I really liked to click through various topics and get interesting information, because I’m not brand-bound. The new form, which means the “much discussed topics” are displayed on the start page is quite nice of the idea, but I’ve had the experience that the threads were partly on the start page for several days, because they were always a lot of discussion. Unfortunately you come now only no ch by specific click into the smaller “Sparts” like e.g. Volvo or Honda, etc. It is logical the VW, Mercedes and Co. in the new system prevail, because these are the most popular brands. For me it was always interesting when I found an interesting thread with the old system (the probability is higher, because every few minutes a new post comes) and I have also taken on other topics. Furthermore, I assume that the off-topic-quote b an immeasurable rise to the new system, as everyone adds their “Senf” to it… What do you think?! I would like to have the old system “Newest Posts / Themes again… P.S.: I find the new design great…

Hey guys, I’ve been using nn pda for some time now to stop by MT and maybe just look at something, discuss something etc… Since the new design is there, however, it has become almost impossible! Before it was always a bit complicated because of the long menu bar on the left etc (pda users will know what I’m talking about), but since the new design it’s practically no longer possible… “At that time” you had to scroll through the left menu bar and come under it to your own content … but now the content is arranged to the right of the menu and scroll left and right doesn’t work now or if only bad and complicated) … Javascript, nice pictures and advertising is not needed on the pda either, that only increases the traffic and the loading times… ebay, amazon etc do it before:http://www.amazon.de/mobilhttp://wap.ebay.dehttp://mobile.aral.de/ Maybe the admins or the like-minded here could simply say a word od he may also get rid of helpful tips on what to do to make MotorTalk mobile … ::::::: MTM-MotorTalkMobil :::::::: I AM NOW :::::::

Hi, why are there so few smilies here? Why can you only attach one image per post? It is extremely annoying when there are often 10 posts in a row, just because a poster wants to send pictures of his vehicle and he does not have the possibility to attach several at once. Why is the code disabled and the user deprived of the possibility to link pictures and smilies (with which we would be back at the first point)? Questions about questions…. Greetings Mar tin

Hello dear and good M-T team, currently I feel a bit jagged In a forum area we allowed a joke thread, in another it hails warnings of the MOD ́s, and it closes such threads. Since I am on the road with M-T in many areas, and have reported this joke thread, and also got an answer from a MOD, I find that not exactly fair or should there be a guideline which counts for everyone, whether Opel, Mercedes, Fiat, VW or AUD I and so on… OK, I’m not talking about being free to write some “spam” once in a while, if there is a warning for this, I’m going to tell you, but I always have the rear wheel to it, and I’m also standing there. I don’t think that either, and really none of you can say that he’s not “spam”, not even MOD’s when you’re on the road as a USER. It’s certainly also OK if it stays in a small frame and you come back to the topic. Technically, too, I’m going to be e Thread ́s closed immediately after opening, although no other user could answer it, or could also give the necessary clues. In this case “Extension of the front seats” = was closed immediately, OK I can understand on the one side because of airbag etc…, but on the other side not. I just ask for info, and if necessary I take the warning also because I have outed myself as “timely spammer”. Greeting Stephan

Meal. I don’t know if this fits into the forum, I think rather in current topics but there I can’t make a post. I’m concerned that more and more people are slaughtering several cars and hiring parts of them here. I really like this, not only because they take away customers from me, but also because they post e.g. in the same topic and underbid the price at multiple times. That’s just not competitive. You are then snatched up by w I have absolutely nothing against it when someone kills a car and sells parts of it, but there are some here, which strangely have a part in stock for each car. What can you do against such people? I have a few “known” seats at the tax office, should you just copy such pages and send them to the tax office? Please don’t misunderstand me, but undeclared work can drive companies into bankruptcy, we must give guarantee/guarantee and show the value added tax, in addition we pay business tax, VAT, income tax, workshop costs and and and, since you can simply not keep up with the prices of various black workers, for that you get from us an appropriate quality of the goods and if necessary always replacement when something breaks. MFG ECOTEC