Category: Traktoren & Landmaschinen Forum

Hello, after having already the third plate with my MTD lawn tractor, it is enough for me somehow. The first time I had a hose pulled in, that lasted two weeks. Then I tried it with sealant, that doesn’t really keep you tight. Since the terrain here will never be free of thorns, I need another solution. Is there affordable solid rubber tires or agricultural tires, also for front? Or does someone have another idea? Greetings Axelino

Moin, I’m trying to explain my problem. I own a John Deere mower X106. Maintenance was done in the spring (oil, oil filter, fuel filter, air filter, spark plug changed). Without mower deck: The John Derre starts perfectly and runs without problems round, no strange noises nothing. Everything great. Test phase 1 to 2 hours. Mower deck completely cleaned and attached: John Deere jumps on, everything is good. He drives perfectly. I turn on the mower and mow about 1 0 minutes. The engine starts knocking noises, it starts stuttering and goes out. Just wait, it starts again without problems, but with knocking noises, mowing now only goes a few seconds, then it stutters and goes out. The next day the same game, 10 minutes mow, knocking noises, stutter and exit. The mower was for the same reason last year 2 months in the John Deere workshop and they found nothing. Can someone help me by chance? I doubt gsam at the Good Piece. Greeting Alex

Hello, my name is Johannes, I’m from Hamburg, I’m new here and I have a problem. My Sabre John Deere seat mower F-72 has a 12.5 HP motor with the number 28×707. There was a conrod break due to lack of oil. Now I’ve installed a new used conrod, the data was all right, also fitted nicely with lifting pins and piston pins. But when I installed it, I noticed that the piston comes up about one millimeter too high and hits the combustion chamber where it doesn’t look for anything. n has ;-(). The current head gasket is about 3 mm thick, can you use even thicker? Or is there something else in the Argen. One millimeter is not a short distance here. Maybe someone can help me.

Hello, does anyone else have a catch basket or catch bag for a Dolmar lawn mower? See also pictures!

Hello I have a Wolf Scooter sv4 and recently the following problem that the mower is in position when the scooter is up to power I assume that the coupling works but when I mow the seam turns too slowly and takes no power on who can help me

Hello, I have a problem with a tractor Deutz D25. I want to push the tractor only about 5 meters. Unfortunately, it can only be moved as far as with a car where the handbrake is tightened. I take the handbrake is the bar which is circled in. (Presses down at least on the right pedal) It can not be moved no matter how I adjust it unfortunately. I can not drive it away because the battery is empty. So a tractor has to be moved anyway? What do ic Thank you very much.

Good evening, I bought a used (defective) lawn tractor today. Ulky part, I don’t even have an idea of which brand the device is, at the front of the “engine hood” stands only in green writing Spider. The engine (a Tecumseh with 7hp, I suspect TVXL 170) does not start, the reason is probably that the outlet valve does not open. The shock (or whatever the exact name is) behind the valve lid does not move. fnet and closes wonderfully. I am honestly not the over-screw, but I would like to try the repair. How do I proceed now best? Has someone possibly had a similar problem or an idea where the defect might lie? With a few pictures of the engine, the tractor in whole I unfortunately did not photograph, but I can gladly submit if necessary. Greetings Woerschtel

Hello together,I wanted to ask if someone knows this model and where I find parts for it. I bought the tractor privately. Unfortunately, the catch basket is missing. I don’t have any papers. I took a photo once, maybe someone knows this model. Thank you very much.

have here from an acquaintance a Fuxtec mower FX RM 6.0 – almost new obviously with broken conrod the handle for “throwing away” is actually already on – someone possibly has an idea where there are parts for it – since it is at present nice cool in the garage, I would maybe still do that to myself, but depends on it… or otherwise: Does someone need parts to add it? then I screw it apart.

Moin people! I have a KTS (MTD) mower with a Briggs&Stratton Intek series 7 200 engine with 656cc. So, today I wanted to mow.. he jumped normally, after a short time he began to stutter, squirted black.. went out, gasoline came out of the intake front. The good part pushed into the hall, hood off.. whole engine stinks of gasoline. Oil measuring rod pulled, clear broth in. Looking at the tank, half empty… a few minutes ago the edge was full. Spark plugs turned out, comes out Gasoline out. Spark plugs completely wet. Valve lid degraded, gas runs out… Turned on the engine, can’t be turned around. So… can this be something that said goodbye in my carburetor that he has let too much gasoline through? I have ordered 5l motor oil only for flushing, new oil filters, spark plugs… hope you can still save it. :-/