MOTOR-TALK

Category: DS Automobiles Forum

  • multiecuscan grande punto

    Hello I have a grande 1,2 bj. 2006 I now have an elm327 v1.5 (must be it) Bluetooth added and multiecuscan.elm327 is visible on laptop com port 3 and 8. I get but no connection. Connection failed elm327-ecu. Interface or ports check. has someone a solution? Laptop win7 32 bit. elm327 is bought from tinxi at Amazon. here the link : http://www.amazon.de/gp/product/B004YG7J…ailpage_o00_s00 with a demo from scanmaster the connection comes about . would be nice

  • Electric shock

    Hello guys and girls, For a good 3 weeks my wife (and I myself also often) gets a shot every time leaving the Punto as if when driving a bit statically recharge To the data: GP 1.4 8V, year 2007, 78,000 km on the clock and as is in the original condition. So radio, lights and co, everything like when buying. Vllt is to mention that it is my wife’s car Vllt you have an idea if necessary same experiences… Thanks already for the answers… Greetings digi

  • 500 Hybrid Service

    Hi together, my dealership claims that our Fiat (03/2021) has to be inspected for the first time. Of course, after a year this is understandable, but it is a day registration and we bought the Knutschkugel only in September. Since then my wife has driven almost 1000km. I know this from my BMW so that it is necessary to have the service done either after time period or mileage. How is this with Fiat? Thank you and nice greetings Skaos

  • FiatPunto 188 8V 60Ps Motor Clackers

    Moin, Opas Punto with Now 125tkm make a little funny noises. Here a pair of back data when it is cold and I am in the partial load range the engine is always light so around the 2000 revolutions. Since the latest is a loud clacking also about 5s after the start to hear then it is gone. Sometimes also a belt squeaks when it is cold. When you open the hood and hear it clacks also in the stand mmn comes the noise from the direction of the belt drive or vibration damper. I have this and also noticed that this is not really round is very easy on the ice. Yesterday during the ride I noticed that the clacking can now be heard quite quietly during the ride and with increasing number of dre faster until you can not hear it from 3000. Oil he was last year Motul 5W40 re-filled the filter Sah well out.

  • 500’s your experiences

    Hello dear forum community! In short: We are at the superior to buy a 500 Fiat for my wife, kindergarten, sometimes in the city, nothing wild. The car is really beautiful, but unfortunately you always hear so much bad and problems. From Jaguar I know that most is often only talk, nevertheless your experiences with the Fiat, especially models, motorization, possibly electric? What is solid? Who has experience with leasing or still better used kau fen? Thank you for your reviews and have a nice weekend!

  • Conclusion after over 1 year Fiat 500 1.2 Lounge (2019)

    Dear community, my expectations of reliability, economy and quality are still surpassed. Now, after almost 10tkm, I would like to ask if others would like to give the Luigi such a good testimony. Certainly, the interior is somewhat limited even for normal grown European men, but that was already known before the purchase decision. The seats (paltrona woman, without much adjustment possibilities) are much more suitable for long distance for me than, for example, those of my EX- Audi A5 (2011), since I always had back pain after 2 hours of driving, no matter which of the many adjustment options I also chose. But Luigi ́s seats still have a lot of air up ;-). Consumption is also very acceptable. 5-5.5l on road. 6-6.5l /100km of pure city operation. (range 550-700km possible) U-Connect and all electronic equipment now work completely trouble-free. So until today we did not regret the purchase decision for this second car no day, started z on the contrary, please keep on like this… VG

  • Punto goes into emergency run – P0300 / P0302 / P0303

    Hello community, it’s about a Fiat Punto – BJ 2010 – engine code 169A4000 a well-known.Previous story: – 3 weeks ago timing belts change completely at a workshop According to the owner, after changing the errors occurred (but I doubt it). – 2 weeks ago then due to the error the ignition coil (combist) and all 4 candles were changed by a workshop – 4 days ago was then changed by another workshop again coil with candles. h undefinable driving time and regardless of the load condition the MKL goes on. However, this goes out directly again – but what remains is the warning triangle at the speedometer. As soon as the MKL appears you notice significant power loss. After a further 2-3 minutes the engine then runs like a sack of nuts. Then when the error occurred times after the row the spark plugs off. Cylinders 1 and 4 run – Cylinders 2 and 3 not! As soon as you switch off the ignition and the engine restarts the engine runs like the one on all 4 cylinders. Error memory says: P0300 , P0302 and P0303 ! Have already read something about “ton wheel” learning?! I tried that today – no change. Now the question to the Fiat professionals – how is it best to limit the error? Cylinders 1 and 4 as well as cylinders 2 and 3 have the same work cycle, right? About your tips / help I would be very grateful because the owner has left the last few weeks really a lot of money in the workshop. would – timing belts be moved around a tooth? Say I would have to check the tax times, correct? Greetings and nice weekend I wish you, Michael

  • Problems with interior lighting

    Moin, I drive a Punto from 2012 and wanted to convert the interior lighting to LED. When the LED was installed, I unfortunately generated a short circuit and after that the interior lighting was no longer possible with the original illuminant. I tested all fuses (under the steering wheel and in the engine compartment next to the battery all in order). A new used complete lamp unit was also not the solution. When I solve the plug and with the multimeter measuring 11.7v I plug in the plug and measure directly on the track it is 0 Where is the error?

  • blue and me mute

    Hello together I have a Punto Bj 2009. Unfortunately, the B&M has recently been silent. Previously it went…. The external vol is turned up Connecting it does it also comes Voice when you press the Windows button It also listens to… Only the volume is 0 What can I do? Electricity had I already gone I’m grateful if someone knows the problem and has a solution Gruss Olbi

  • Linea 1.4 BJ 07 l Central locking passenger side defective

    Hello, our Fiat Linea is currently spinning around with the central locking system. When closing up, it closes up and closes all the time. I have now noticed that the passenger door does not open. However, the lever is shaking. Therefore, I think that the actuator is defective at the passenger side. If you sit inside and the passenger side unlocks from the inside and then unlocks from the outside everything works normally. I have now found a suitable spare part on eBay. Does anyone know how to learn the central locking system at FIAT? If I install the new part (from the butcher) it won’t just work with the old radio key or does it not matter because of the ECU? I hope someone can help me. I can’t find anything in the net and there aren’t so many Linea in Germany either. Thanks in advance and dear greetings Nico