Category: Kia Stinger Forum

Can you get the Stinger lettering train, which can be glued on the steering wheel, for example, somewhere, also as a graphic file, in order to create something individually?

Hello, the KIA Stinger GT is available on the official KIA website from €75,990. Is this a price error or is KIA recently processing gold in the vehicles? At that time the model was available from €53,000 or not? What is the reason for this massive price increase? LG Manuel

Moin, with me, the radio has no sound every 2 weeks. No matter if DAB, USB or Bluetooth. It has been updated to the latest software to fix the error. Since then, however, Android Auto has only been there after 20-30 seconds when connected and Maps constantly hangs up, which makes navigation impossible. Does anyone else know that?

Hello to the Stinger Fansgemeinde, after having enjoyed my new Stinger for 2 weeks, now the first questions come up :-). I want to say goodbye to one and the other assistant and have turned off the fatigue warning and the track keeping assistant in the settings menu e.g… Unfortunately, it is always on after restarting again. It seems that he does not save my changes or does not assign it to my user? Do I have to go somewhere after change on Save? Or does someone have a tip? A small question, what is the difference between the symbol lane hold assistant (car in the roadway) and the symbol green steering wheel in the display, or the difference function button left lane hold assistant next to the steering wheel and pushbutton on the steering wheel (the same symbol but with steering wheel symbol? I hope to have explained it correctly :-). Thank you already in advance Good driving Ralf

Have recently had the following problem with cold engine: When stopping quickly to a standstill, it squats briefly, in conjunction with a speed reduction to 500, and then climbs back to 750 standing speed. Feels like the automatic is uncoupled too late. Drive the 2.0 MJ 2019. Did someone have this so far?

Hello guys, Two days ago the engine at 80 KMH and cruise control did not take any more gas but drove with 80ig further, yesterday I wanted to bring the car now into the workshop and was a little faster on the way, at the traffic light then the engine went out and the car did not start anymore. After I let the engine rest then he started again and ran only stutter back to the workshop. The workshop is completely clueless and has submitted this to Kia the car has The car has been constantly firing under cruise control even in normal driving mode and simply does not speed up properly. Today the workshop has now been tested and that twice??? and only the problem with the gas has occurred, but also here it has not indicated an error. The workshop had a diagnostic device with it and there only the MapSensor was displayed, but is already new and the problem definitely cannot cause. Does any of you have an idea what that can be? I personally tap on the engine control unit that would explain all the symptoms. The workshop meant throttle valves or turbo, which would explain neither the gas acceptance nor the ignition oscillations

Hello dear Stinger fans, I’m new to the Stinger fan community and found my Stinger MY21 on Thursday in Panthera Metallic. Now to my question. The Stinger stands well there, but I noticed that he reared new tires after 750 km. The explanation of the dealer was that all delivered MY21 tyres had to be mounted from the factory and they had to be exchanged. Since I found nothing on the internet about it, the question to you whether anyone heard that too Thank you very much in advance.

Hello dear community, recently I had to notice that when I parked my GT (model year 2019, KM Stand: 5500) there is a louder/lighter squeaking. Unfortunately, I can’t identify exactly where this noise comes from. I tap on the engine compartment. If I give a little bit of gas at step speed, you hear the squeaking too. However, a little quieter and only very short. Is one of you familiar with the problem? I will definitely call the dealer tomorrow. Thanks in the pre. hkndriver

Hello, since I found nothing on the internet I thought I was trying here. I drive a kia stinger gt 3.3 and soon the brakes are due because the guarantee is also as good as to end I decided to have the brakes made in a free workshop now to my question my workshop said to me that I should always also get the pins (bolts, accessories set) because you should only use them once and then make them new when braking, but suffer r I can’t find anything on the Internet, one of you may have an idea or even a link for front and rear axle. Thank you in advance

Hello, has any of you installed exactly these tire pressure sensors and they work?https://www.ebay.de/…/283646115205 I don’t have anything to do with them. In retrospect, they fell on top of the A*sch again. I was recommended and I bought them. In the auction it says: “The sensors are already pre-programmed and ready for use, they only have to be learned about the vehicle”. With my ignorance I thought now, install and the vehicle recognizes the Senso after a certain learning phase (car ride) of itself and everything is done. Puster cake! After two weeks and more than 500 km of car ride, the menu still shows the tyre pressure in the display: display only when driving. So the Stinger does not recognize the sensors by itself. I was back at the tyre dealer who installed the rims, tyres and these sensors to me. I did not buy the components there, but only had the assembly done. He could do with two different Only with the ATEQ reader it worked. He went into the device menu, selected Kia Stinger in 2018 and left the four sensors (clockwise) according to the default from the front left to the back left (clockwise) and said then I had to drive now 20 minutes … ???? For me illogical, because no data exchange between the car ECU and the reader took place. I thought that he now has to send the read out data via OBD to the control unit? I also have the ebayer “If you don’t have an automatic learning process, you either have to learn it stationary with a device or via OBD2. Programmed means that these are programmed for your vehicle.” I also found no information in the operating manual (on-board book). I don’t look through at all and only know that I am the doofe. For me, the ebayer’s information in the auction is wrong and the reason is rather an au I also find the procedure of the tyre dealer with the device incorrect/unlogical. But as written, I am ignorant. If I only had the original rubber sensors from Korea sent me for the same price. Does anyone know any advice?