Category: Mazda Forum

  • Mazda 626 GD BJ 91 for sale!!!

    Hello would like to sell my old Mazda 626 2.0 GD.. He is from 91 the 2.0l maschiene with 90PS, G-kat 237000 has run… 300 Euro is still in Kassel.. reports MFG TEEEE

  • What color is your Evoque? Online survey here

    Hello, is there really only the three colors you see regularly? Just give the outside color of the driven – or already ordered – Range Rover Evoque…Here you go to the survey… …and here to the previous result

  • Consumption 626 GE +++ Survey +++

    Hi people ! How much is your 626 ? My 2,0 GE (116hp) Built 93 swallows on average 9-10 L which gives me quite a lot of displeasure at the moment. Does someone know the test, can you do something ? Or should this be normal ? I have read in some threads already from under 8 L ?!?! And I have a speed-dependent clacking in the engine room at the moment. Perhaps valves or dumplings. I have 15W40 oil in it, could it be it (Will test 5w30 soon) ?

  • More PS at BA / 1.5 l ?

    Have you ever heard that simply remove a disc (distance disc ???) from the BA, you get the engine power from 88 hp to 122 hp. Does anyone know what really needs to be removed and what you have to pay attention to?

  • ??? MX-6 Buy ???

    Servus on the other hand, I’m driving an Audi 80 Avant at the moment, but I wanted to slowly reach my eyes again to something Japanese. I noticed the Mazda MX-6 2.5 V6 in particular. Did anyone recommend this???? I had a 626 GD/GV before and the box was reliable as only what! (I can’t say that at the moment of my car.) So if you have experiences with the car, maintenance, problems etc., then always with it. That will help me in the decision-making.

  • turbocharger

    Hallihallo, I just wanted to know if it would be possible for the mazda 323f ba 96′ n turbocharger to be installed or if there is such a thing for the model at all. and if so, what does it cost? or does it just ice the little 1.5 engine out of interest… am a little euphoric at the time mfg slash200

  • Mazda 323 f BG windshield/stone impact

    Hello I’ve had a stone blow in my front window for a few weeks, but in the driver’s field of vision. Until now it doesn’t tear and doesn’t bother, you can hardly see it. My next TÜV is in December this year. Now my question: Will the TÜV man give me only a plaque, if I put in a new disc or if I can tell that the stone blow was created on the way to the workshop?! With car recycling you get a used one for 50?uronen. Ne new one costs 250? or so. Is it worth installing a used one and what does it cost? Maybe there are also some motor vehicle mechanics here. Thanks in the previous ___________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

  • Car goes off in curves …

    Hi, so I have the following problem: The car (MAZDA 323 BJ. 1989, 185 000 KM) was almost 2 months ago at AU + oil change. Since that time, the car starts in curves from time to time, should be called, the rev indicator shows 2 000 U/m but you don’t listen to the engine any more etc. Sometimes it goes on again, sometimes I have to turn the ignition key around again! Nobody could tell me what that should be so far, so I’m posting, in the hope of helping, here! I would be very grateful about the answers! MfG b0toxXP P.S. even if the tank is half full, it happens!

  • MX 5 with VW VR6 motor possible ??

    Hello to all of you, after about one and a half years driving a 1998 MX 5 with 1.9 ltr. and 140 HP, I sold the car, because for me first of all the sound and second lacked the joy of turning, spraying and performance. Everything else, such as design, road position and handling were almost perfect. Now the idea of transplanting a VR 6 engine into a MX 5 is not going to go out of my mind. Theoretically, such an absolute hammer vehicle would have to be created. Now my questions: 1. Has anyone ever heard of such an already executed conversion? 2. How do you see the technical feasibility? 3. Who could do such a thing? 4. What do you think will cost such a conversion? 5. When using a 2.9 ltr. VR 6 with 190 HP, is there any bigger changes to the chassis on the side of the series version to be expected? 6. What does TÜV say about this, what should be considered in advance in order not to make a formal error in advance? 7. What else would you think of the project??

  • Insurance

    Hello wanted to ask if someone knows a very cheap insurance have a mazda 323 BG 1,9l and am 18 and have my license are 16.8.04. I hope that someone can help me one more question is a motorcycle cheaper and if so how much? I hope someone can help me with my big problem. Thanks in advance