MOTOR-TALK

Category: Nissan Forum

  • R129 SL 500 Bj. 94 blower is not working

    Now I have something to think of What can it be if the blower doesn’t work? Although it comes warm through the wind. The keys come the brighter when you press on it, but no matter if 1,2,3,4 that doesn’t work. I saw there is a relay for that it can be? And a mechanic once said there would be below the windscreen wiper of the engine and there you would have to solder something out and again. What do you think about it?

  • R 129 vehicle exits while driving

    Hello community! Have a proplem with my 500s. Now for the second time within 6 weeks it goes out during the ride. No gas.This time just in front of the front door, thank God. Can start it, no gas acceptance. Off. ( Starter turns, petrol pump runs). Have changed times to the fast the basic module( had another one in reserve). That’s not it. After about 30 min. and repeated start attempts he takes gas again and runs, as if nothing had been done. Maybe someone knows what and can Give me a tip. Many greetings from Kassel Michael

  • SL 63 AMG (BJ 2013)

    Hi guys, I’ll be looking at an SL 63 AMG soon. Since I’d like to be 100% sure, I wanted to ask if you could give me some tips on what to watch out for. To the history of the cars comes from Germany and had only one owner up to now. What made me stunned though is that the owner took it to Dubai for some time. Maybe that’s normal I don’t know. Anyway, the car is now some Zei My question is now whether the temperature in Dubai could have made the car in any way, what I should pay attention to with this car and whether anything is known about this car (Mängel ect.) Are the engines long-lived or is there anything I have to consider? The car is so interesting for me because he had as said only 1 owner and he only has 38,000 km on the speedometer. I am very grateful for all the information !!

  • What are the problems with the K11 after several years?

    WHAT ARE THE PROBLEMS AT K11 FOR MORE YEARS? Background: Was with the TÜV and this meant there were considerable defects (fall!) 1. The brakes VA worn – discs and blocks must be new 2. The brakes HA pull one side – wheel brake cylinders and pads must be new 3. Coupling rods at the HA are defective – must be new 4. Stabilizer bushing HA too much game – must be new. 5. Axial joint li. too much game – must be new 6. Track rod head li. to wedge game – must be new 1.+ 2.+ 6. is t yes OK – can be defective but the other things. Do you have similar defects with your K11??

  • Nissan Qashqai (II)

    Yes, once again a name, where you could guess for hours how to pronounce it! Anyway. I have done a test drive and am very pleased with the Qashqai. But for me only a diesel comes into question and Nissan Austria has big problems. A diesel car should arrive at my Nissan dealer at the earliest in June. Anyway, the Qashqai is a fine car, only which opponent does it have??? And like I want to have the Qashqai (i.e. as 2.0 DCI in Te kna version with six-step automatic and Navi) it costs 29,000€ Not too much, as you can see from a few examples (updated) Dodge Caliber: 25,500€ Fiat Sedici: 23,500€ Toyota RAV4: 30,90€ VW Golf:39,600€!!! Has anyone had experience with the Qashqai??? Tschö, K.-H.

  • SUNNY or PULSAR GTi-R

    Are you looking for a SUNNY GTi-R!!!Who knows someone who has a good and cheap sale???My price limit of pain is 10T€.I also take every color when it doesn’t go differently.My preference is BLACK.He can also be a series,so my ick especially the benefit.My GTi is slowly too little for me!!I’ve had to get infected by a friend, say,it has to make when changing course …ZISH… Believe me this noise is addictive.Once turbo,imma turbo!!! GRUSS TO YOU R.T. Let’s get out of here!!!!!!

  • COMAND APS NTG1 Telephone call cannot be accepted

    Hello, I have the following problem: I have the COMAND APS NTG1 and a Bluetooth module SAP V2 coupled with a Samsung Galaxy S3. When a conversation comes I see the number on the display and it rings; but I can’t accept the conversation. When I press the (lister) the ‘Start’ screen from the phone appears on the display (as if I press the TEL button without making a phone call), but it continues to ring. Reject (Stop) works. Whether I press the Tas press the ‘OK’ button on the steering wheel or press the ‘OK’ button. The caller also rings the phone. If I call somewhere, I can’t hear the caller who hears me. The ‘Stumm’ button is not activated. what can it be?

  • Mercedes SLK R 170 does not always start

    Hello everyone! As described in the title, when the car has stood for a weekend it does not start any more. The following I tried so far: – new batteries in the radio key, has brought something for about 4 weeks – K40 relay card soldered, built in, car starts on – next day but not again – new battery built in, after about 4 weeks again the problem What else could be the error? When soldering the K40 I also noticed the following: One of the Ste If you change the fuse, it looks like it’s right in the holder. But if you take off the panel so that you can see the circuit board directly, you can see very well that the fuse presses the socket into the housing. Only as further information, that the K40 likes to make stupid.

  • Check relay unit K40?

    Hello together. I have the following problem: My 170er no longer starts and the fuel pump is no longer controlled. I now found out that my fuel pump relay is sitting in the relay module unit K40 (motor room passenger side of the OBD plug). Have already read some threads to the part and on which pins it is now. Just don’t bring me much if I don’t know exactly how to check a relay. Here a short pin-set of the supposed plug: PI N 1 = terminal 30 (duration+) for relay fuel pump, vein colour red (2.5mm2) PIN 2 = unused PIN 3 = 12V+ for fuel pump, vein colour red/grey (2.5mm2) PIN 4 = terminal 30 (duration+) for , vein colour red (2.5mm2) PIN 5 = mass The 15A fuse that secures the pump is usually required for help !

  • Number plate front

    Hello together I am looking for an acceptable solution for the front license plate holder. Since I have a very short license plate, this holder looks from factory left and right far above my number plate over and that I find optically less appealing. Has any of you had the same “problem” and found a good solution? I thank you already in advance and wish you still nice rest Christmas greeting Martin