Category: Renault Forum

Good day to everyone. I recently bought a Peugeot 407 Platinum with 2.7 liter V6 Bi Turbo and automatic. Engine has 150KW. Engine runs, when it runs, very well, the turbo ́s chirping cheerfully and he drives like a dream. BUT after a certain time he beeps briefly, then goes out and the display shows instead of P or D and so on at once only one – or also German a stroke. Then he doesn ́t go on or the starter doesn ́t spin anymore. because of the automatic he has a lock relay that he can only be started in P. If this happens and I put it in P, however, nothing changes on the display, at – and starter still does nothing. Apart from that, this happens even when he stands on P. So beeps, shows – and goes out. If this has happened and the lever is on P or I put it back on P to start, he also stops and then can’t move. The previous owner has then always few ma l hit the control unit in the engine compartment and at some point the display showed P again and then it can be started completely normal again. Absolutely crazy. I type on a wobble contact or a faulty relay. Unfortunately, some relays are soldered but that would be no problem. I have soldering irons. Nevertheless, the question remains: 1. Why is the lever stuck when the display shows one? 2. Why doesn’t it start any more? 3. Is there anyone else? I hope one of you knows the phenomane and can give me a little more help or tips. PS: In the appendix, the diagnostic report from the tester Or here, the direct link to the report:https://usait.x431.com/…/+1

Hello together, unfortunately my car was broken a short time ago and we are looking for a new one. Most important criterion 4×4 resp. allrad. Today I saw a used 508 rxh hybrid construction year or first registration 2013 and actually fell in love. Unfortunately we did not have a peugeot driver or hybrid driver in the acquaintance circle. Now my questions: How have you been satisfied with the all-wheel function? What experience have you made with the hybrid (errors, repairs) , driving feeling)? Look forward to your experiences, best thanks

Hi together, I bought a 3 1/2 year old Peugeot 406 Break HDi 110 Premium this morning, black-metallic, full leather, 235 BBS rims and sports suspension (a little brazen, I have to admit, but looks nice). Car has run 1 previous owner and 74,000 km. I hope I’m lucky with this car. Certainly a lot of questions will occur in the next time – I would have the first ones already: Is there a release of Peugeot for organic diesel and if yes, you have Erf The second: The car has to be inspected in about 10,000 km. What costs do I have to reckon with? What is the guarantee if I don’t have the inspections carried out at Peugeot? How does Peugeut handle all aspects of collec tiveness? That’s it, thanks for Info’s and Greetings Christoph

Hi, actually I’m a stranger here, and I belong in the TT camp. But since I may soon be a member of Peugeot Germany, I would like to ask myself briefly: I would buy a Peugeot as an MA, of course, but I am a bit pre-loaded by the Audi, in other words, I get nothing in series without deteriorating. The 407 is available with a V6, but it also has “only” 210 hp… Is there no small series of the Peugeot models, above all from the 407, which is on the b for example, Renault also has a racing clio and the Megane Sport. The study 407 “Silhouette” e.g. is extremely good for me. Unfortunately, the car doesn’t exist. Do you know which tuners have a nice program for the 407, especially with regard to the performance increase of the V6 engine? Or are there sports variants of the 407 or other model series with real power? One that looks like the “Silhouette” and has this performance I would take immediately… The series vehicles are too good for me, although the design, especially the 407, is very nice. Thank you for your advice.

Hello community, especially in autumn and winter I have an unpleasant problem with the smearing of the windows with my 607 and would like to have some practical tips from you. Forward: I changed the indoor air filter (used a model with activated charcoal). The air conditioning is always running during the ride (even if it shuts off automatically from any threshold) and the windows have been treated with an anti-fog spray from Sonax. In addition, I have in the Inn At the beginning of the winter I also changed the outside temperature sensor. Now the correct values are displayed again. The fogging was even more extensive before these actions – nevertheless it still disturbs. The 607 is often moved for long distances during the weekend. During the week it is often outdoors, but also the accommodation in an underground garage has not changed the behavior. As far as I can see, it is in the indoor and outdoor areas. In the 407 I read that there is a temperature and humidity sensor, which is supposed to prevent the fogging of the windows – is this also possible with my 607? If necessary, this sensor is also defective… Thank you Sebastian

One master works at Peugeot, the other one has a free workshop. So: from +4 degrees and colder he no longer jumps on his own, even though the starter turns and the battery is strong. The following parts new: OT-Geber, temperature sensor, idle control. According to both experts after the diagnosis it is clear: there is no petrol from behind or there is no ignition spark, so “Startpilot” did nothing. Then he has to “catch” himself for a moment and then stays on. After that, if he goes out, he jumps again with his own strength. But as soon as he has stood for a few hours, nothing happens again. Both it is completely inexplicable why he still starts by towing would be great if one of you still has a ignite idea Thank you

Hello all, I’ve had the problem for 3 days that I’ve had the turbo several times on the Autóbahn. Nach ride on parking lot and engine AUS/AN he is immediately there with full power, 50 km later it occurred again and the same game. Basically the car has still accelerated without turbo, but just in slow motion. It was also no Ruckeln,etc. to feel just no power. Had at the very beginning as a new car already the problem and there was on guarantee a magnetventi l replaced. Now he is standing garade in the factory town (Official Peugeot Workshop) and they suspect that the turbo is defective and is to be replaced. magnet valve is excluded. First tomorrow, however, consultation with the Peugeot headquarters is to be held. Ask yourself now. Does anyone know such a problem? How can a turbo damage by motor on/off be (temporary) gone again. For me as a total layman it sounds more like a problem of “steering” systems around it? around an HDI135 engine (407SW) with year of construction 08/2005 and approx. 110T km. I find it quite early a turbodefect after 110T km. Would be nice if you would hurry me your opinion. Thanks & Greeting Jürgen