MOTOR-TALK

Category: Saab Forum

  • Cable strand clio

    Hello guys, I have nen clio 2, 1.2 16v bj 2001 and engine d4f 712. He has a problem that is only possible with full throttle only 50kmh. Error reading resulted, gaspedal Poti error(sporadic) , Lambdasonde error and another. The man from the workshop meant motor harness replace then everything fits and errors are gone. Does here by chance such a strand or other tips? Part number would be 8200346202, is nowhere available. Or renault has changed the part number. a catalogue of parts or something. Thank you in advance

  • Clio with tce90 – 91ps Recommended purchase

    Hi to everyone, I am interested in the current Clio with tce90 – 91ps motor! maybe I would order it, since we need a second car so slowly Is the motor basic solid or a problem motor? Vulnerabilities? Your recommendations what I have to observe? p.s. citroen c3 is still to debate, but purely optically I like the Clio better! Best regards already and look forward to the answers!

  • Clip 4 tce 90: Cooling water loss but no puddles or leaks to see

    Good morning am here new in the forum have a question.Drive a clip 4 tce 90 are a few days cooling water loss but no puddles or leaks to see engine runs without problems is you there what is known to fill always about 1 liter on. Fan works at about 96 Celsius

  • Windscreen wiper system repaired – ignition defective

    Due to the fact that the nozzles of the windscreen wiper system were no longer working properly at the front, I cleaned them and set them up correctly. I had to spray water several times during setting. After I had done this, I wanted to start the car. The starter worked, but the engine didn’t start (which previously worked without problems). I looked at the candles and had to find out that there was no spark of ignition. Since I still had a new original replacement ignition coil, I built it in and tried to start again. Even without success. What else could it be about? Also the help of another car at start-up, by means of a starter cable, did not help.

  • Megane Scenic 1.9 DCI Built 08.2005 does not start

    Hello dear people I drive a Renault Megane Scenic 1,9 DCI 96 KW Bj 08.2005 Yesterday he just went out shortly after the start and can not be started since the tank is not empty.. Error memory empty it seems to me as if he does not get a diesel. I pumped several times at the vent (black rubber bellows front passenger side in the engine compartment) until I noticed a strong counter pressure at the same time start the engine. He jumped on but then immediately went out again has tested this several times always the same. Is it on the diesel filter, pre-shipment pump or on the high pressure diesel pump. Which error is probably present and where exactly can I look for and fix errors. Greetings Ralclau

  • Scenic I Ph. II 1.6 16V – rural road driven, engine run out and no longer starts

    Hello! I received an emergency call from my parents today: breakdown… On the road overtaking the engine probably went out with a funny noise (my father couldn’t really describe it to me), of course on the holiday evening. Before that there were probably no engine problems. If you tried to start it the starter turns, but the noise is completely unfamiliar, would say higher pitch. Warning indicators etc. was no problem. I was told nothing about a warning lamp, only that the Tank was still about half full. Tow truck was there, now I would need some preparation for the workshop visit. Unfortunately, I found nothing like this about the search, either it starts from time to time or the starter no longer works. EDIT: They meant to me that the timing belt is still whole. The changing intervals were always maintained. Thanks notting

  • Seat upholstery Grand scenic Bose

    Hello, wanted to ask for your experience with seat upholstery. Has someone used this alcantara-like upholstery for a long time. Would have concerns about soiling this upholstery. At home we also have a fabric cover and after a few years it is not as good as it was at new purchase. On the Renault homepage this Teflon coating of this fabric is praised, but I don’t trust it. What do you think about it. Unfortunately there are the Dyna mique equipment category no longer so that in case of a new order on the Bose version you can only order with this Alcantara upholstery. Was actually always satisfied with a normal conventional upholstery with my cars and would not want this with the Bose edition. LG

  • 1.4 16v: engine damage or control times

    Hello together, I have the following problem, my clio got an exchange engine with 139000 km, the timing belt was changed. The engine sounds like a diesel or like a sewing machine after installation. That’s why we saw yesterday after the control times again. So kw on ot position, kw thorn turned in and in the same way nw lock pure, has fit immediately so should fit the control times, or not ? engine runs just as shit. It is a 1.4 16v engine. Can there be a bearing damage that the part is so loud and not running at all? I have attached a video file where you can hear the engine. If jmd. Ne idea or suggestions would be great. Greetings Volker

  • 2001er Clio 2B D4F engine with strange noise from engine compartment passenger side when engine off.

    Hello everyone! Can anyone tell me what that could have been ?? It came a fast clacking sound, perhaps as if you were holding a paper card in a fan, but it turned at a slower level. However, the clacking was rather metallic (so to stay in comparison metal card in a fan of metal sheets has). The two But: 1. The sound was still to be heard, even if the engine was off and the vehicle was closed. At some point it stopped. 2. The Noise came roughly from the area above the front tyre passenger side or between the tires and the dipped-beam. It was of course not the normal fan for cooling, which sometimes runs after. Before that there was, by the way, a clear power loss and more restless driving. Error memory says problem with the circuit injectors, misignitions not nearer identifiable cylinders. Now 20 minutes and two test drives later, the car drives as if nothing had been… Error memory deleted and they don’t show up again at the moment… I’m primarily concerned with what that was and where it came from. I don’t think there’s anything moving in that area, do you?

  • Passing beam passenger side does not work despite new bulb and new fuse, what do you do?

    Hello, I had a defective dipped-beam, I changed the bulb and that was still not possible, then in the engine room driver side replaced the 15s fuse and that still can not work. At the moment I do not really know, so I can start the other headlight works perfectly. Can possibly help me where the problem can be, so bulb and fuse are new. Would be happy about help. Thanks! Bulb for standlight is also through. But that’s not gan z so important. There is also a loose plug in it, I can’t assign it at all, it has such a white / yellowish housing, while the plug from the dipped-beam has a black housing, as if mass is missing, but everything else works, turn signals and driving lights no problem. H1 bulb and headlights with such a piston in Xenon optics, but no XenoN!