Category: Opel Omega & Senator Forum

Hi! Seen in ebay under the article number 2430603359 Clear glass headlights for the Omega B. Would you like to know if the light width regulation still works with the things and if the headlights are also good? I am grateful for any kind of opinions and experiences. Greetings nova2003

Hello! Is it normal that the repair of a door holding tape (I mean the thing that holds the door in different positions) costs about 250 EUR for the friendly one?? Other workshops don’t want to get there because of the disguise. The door can still be opened, it also stops in the final position. When you let it go, it falls down. When it opens it crashes inside there. Is a repair so expensive that it costs so much? Mt Gruss Rammel

Hi ! Before the summer I wanted to sound my discs in the back in the combo. Has anyone ever done this before? The discs are quite arched, can you still do this with a hair dryer or do you have to cut stripes there already? Would you like to make the ifs in a piece without cutting stripes. With us also a BMW drives around, which also has the front side windows black. I also like that. If someone gives a certain foil, which you also get registered (or with ABG) or ge doesn’t that mean anything, and he’s just going for good luck until the greens complain? THX, Thomas

Moin alle zfür die Mitte zusammen Well, I have experienced something. After having read a lot here already and my Kumperl recently also said to me ” Eh Du Dein Diesel sounds funny however “, I thought to myself to look into the engine room. Well said done and not seen anything eye-catching until I pulled out the oil measuring rod. THE TROCKE!!!!!! I immediately ran the fear sweat over my forehead. What to buy now cih to ATU. Well there I stood now before tens of many varieties. After a For a while I decided for the middle in the price range. Variofl…… and impact death. Definitely for 5W-40 fully synthetic. Has had the best description on it. Payed and out, bonnet up and pure the oil. And look here my Ommi sounds quite different. Quieter, more revolving and the performance is now better. I promised my Ommi to look for the oil more often now. Gruss mukab

Hello! can someone help me how to convert my Omega B MV6 year 1994 switch from currently Euro 2(over 400€ per year) to a better tax class, or convert, and thus save control? mfg daniel

A 13 meter long team Greetings Andrea

HI I wanted to ask if of you I can have good deeper feathers I have the springs KAW in it and am completely dissatisfied with it are front 65mm and look but like 40mm springs you know the other the 65mm also really like 65mm make then please say happy!!! Thanks already!!!! Gruss marco&kerstin

Moin, at the omi of my Schwegering (X20XEV Bj.99) the servo pump has said goodbye. Found used on the scrap yard (in the short term there was no new one here and the car was used mainly) and changed (was not me, therefore no part number – but was used by another X20XEV). Now I wanted to order a new one to replace the used one at the next service – was installed a 90473168 – if I entered the at Daparto only V6 models under “pass” When you enter the vehicle data at Daparto, pumps with the numbers 948049, 90409232, 90543246, 948077…..but not the upper ones. OK, now someone can say that in the 21 years maybe the car was made….but….Vehicle was bought by the first owner with 14,000km and is in their possession since. Very unpredictably, that the vehicle with such a mileage and after 4-5 years the servo pump was replaced. Out of pure curiosity I would h be happy about a logical explanation What is more important to me is which pump should I buy new. Part of the question, since at 90473168 only one pump is offered and the price is 2x higher than the one provided by search engine, from which there are also large selection of manufacturers. Thanks in advance

If you think it’s OK, there’s a new problem. Today I noticed that the rubber sealing rings for the high and low pressure lines are leaking on the compressor. The screw had loosened a little bit and I can’t get the sealing rings close anymore. So empty the system, renew the sealing rings and fill the system again.

Hello, at Ebay there is a chip for 25 € to buy. It promises with the MV6 +20Ps, +35 Nm and -0.5 L consumption. Installation should be very easy. So you ask yourself…why not? But does someone have experience with this or a similar chip? What negative consequences could this have in the long term?https://www.ebay.de/…/380115869740 Thanks and greetings.