Category: Smart Forum

  • Exhaust manifold MV6

    a question in the round, I drive an omega kombi mv6 bj 96. when giving gas blows in front what either curved seal or exhaust manifold, although it still looks new. only when giving gas blows what on the right side. in the stand empty run nothing to hear from blowing or hissing. so in the free workshop and asked what it costs to expand. mean 400 euro the engine must be lowered to be able to expand the exhaust manifold on the right side. that can’t be so right, says the whole axis must be solved said the in the free workshop here in whv. is this all so ??? thank you in advance

  • Car Mispurchase !!!!

    Good evening to all !!! I would need your advice, and my uncle got his new used car today. (Opel Omega 2.0, 116PS) Now I have looked at the car once, test drive etc. The following flaws have occurred to me: oil licks (dicker drops, bottom of the engine), turn signals are defect although this was allegedly repaired before purchase (see how), front axle strong flap sounds, air conditioning does not cool, V-rib belt Strong porous (I wouldn’t drive with it), Ignition lines cylinder 1-4 all strongly cracked Zyl. 2 holds straight together, Well some defects may not be the upper hammer, but small cattle also does crap. To what extent or what would the dealer have to repair everything according to the legal warranty ??? Since this could not have happened from 100km driving everything !!! I prefer to give back the car but don’t know now how far you can go there. Yes, it was for now, hope can help me. Gr33tz Da_Fl0

  • again one less….

    Hello together… OBJECTIVELY it should become an Omega again however the market is abysmal and the drinking of the V6 went against the line for a long time… so I found something else nice thank you for tips, links etc. but will still be on MT and you will still be annoying the New Astra H Caravan starsilver 1.9 CDTI (150hp) m. DPF 6 gear switch BiXenon AFL IDS+ sports suspension with EDC/sport key CD70 Navi with 16:9 CID Bluetooth Opel adapter will n even retrofitted housewife’s shock bar rear full leather black front 3 stage heatable 4 eFh light and rain sensor rear almost completely black tinted and a consumption of 5-7L/100km planned are still BC released by the FOH (my Op-com strikes at the point) Vmax 210km/h lock at the FOH can be removed o.g. Bluetooth module install CID on TV extend (is still in the consideration phase) MfG Flo

  • Engine does not start

    I am new here in the forum and am looking for urgent help. my problem is the following. I have an omega a bauj 1991 2.0 this I drive now about 6 years. except for the usual wear rep. and various rusts ( ;-)) I am satisfied with the car. my twilight lock is stuck. I can not turn the key, at the last time there scratched that and now it is fixed. who can describe to me how to extend the ignition lock so that I can clean it? the cladding was made by me en removes and also ignite plate from the lock away but the lock itself…? who knows how and what?

  • Heat values for spark plugs – hope for explanations πŸ™‚

    Moin! Can someone introduce me to the heat values of spark plugs again n bitsl? Let’s take as an example the C20XE, which has as a serial motor candles of e.g. Bosch with the identification FR8LDC (no 100% warranty on the identification, but was believe something with 8 ) When and why then use “colder” candles (e.g. one with a 7 instead of a 8 ) and how are the colder ones? I only know this from reading with more powerful engines (e.g. Mantzel PowerBox on the X14XE [believe Zero sch This is why my thought was that if you install a “sharp” camshaft, the engine gets more air through longer opening times and a larger valve stroke, which could possibly lead to a slightly leaner mixture (believing to have read that a minimally lean mixture is optimal for maximum power, than NOT Lambda=1 ?!), which in turn means that the combustion temperatures rise slightly (please correct me if I am wrong). Are other candles used for this reason, because they may have more heat off (even if the term “colder” candles would be a bit misleading) or do I think that I’m just full of wood? I hope you can make me a little smarter. Thx so far

  • Omega 3000 in matt black paint what would be the cheapest

    Moin @ all Would like to have my red Omega 3000 completely in Matt Black… Who has information how expensive that would be in a paint shop or if I could do it with roll/can myself. If I let this in he paint shop it comes to me cheaper if I myself develop lamps and what else can I do so that I get this quite cheap. Does someone have experience with self-painting in relation to can or roll and the KOsten? Sorry have no idea of such things and Pre isen … Thank you in advance

  • Omega B automatic jerks when starting

    Evening guys Have there a little problem my omega b 2,0 16V Bj 94 automatic takes the first few sec. not really gas on when driving fast (e.g. from the traffic lights) or rather he jerks. That’s also me at about 100 when I give gas and he turns off `n 3 in 4 noticed And what worries me even more is that he was sitting a few days ago (if I drive quietly he somehow has no breakout) he at about 80 no gas anymore I thought it was just a louder and louder knocking (give it to the gas). Then I started it again after 5 minutes, slowly drove home and it was nothing. And now the question: what can that be. Thanks already for your help mfg

  • Omega B 2.5 TD injection pump from BMW?

    I would like to change the injection pump at my Omega B 2.5 TD because the old leak is. I have now come across an offer: Injection pump from the BMW 325 TDS E39-shall fit according to the supplier also at Omega???Is that really at that?I mean…that doesn’t seem quite absurd to me now, since the engine itself is also a BMW engine…just with a different head,so also bit less power than the old 525 TDS.

  • Help!!!!!!! please!!! /sicheren..relais..

    hi… have spent a great week and managed to exchange a warmer swapper… thank you.. now there are four cubes on my writing table and I don’t know which one belongs to.. the little green one with 30 A probably belongs to the place where I have already seen him on a two photos but the other three… 5 A, 50A and 2/4x21W no idea… or good luck I don’t turn the car key around. aid… jmd a photo or a description… a fre the fact that these relays are not listed in the manual or if I will not now combine how high the safety of the flashing systemist and blablabla… please help…. mfg dk

  • ABS + TC Omega MV6 mud roller lamp

    Hello guys, have an Omi MV6 (95 ́er Bj.). Recently, my ABS and TC indicator light lights up and unfortunately don’t go out anymore πŸ™ The ABS doesn’t work with full braking either. Did this “hopefully little problem” ever happen? For your help I thank you already now.