Category: Smart Forum

  • Cliff bumper

    Hello, I’m looking for a front bumper from a calibra cliff. the color doesn’t matter it can also be scratched or broken. I’m so shitty tuss in the front and a new one is piggy expensive. who can help me where I get a happy or sell it to me. !!!!

  • Sliding door in the Spacetourer

    Hello together, as was already written in other articles, the sliding doors also clap with us. Warranty is through, therefore I have to/will go to it myself. Now to my problem, I would like to look under the cover of the middle rail, but does not want to tear it off. But since before me some mechanic has tried what, is not quite fixed at one corner anymore why I could see a little the fastening. Therefore the question in the round, I go right in the A Take that I have to remove the rear lights so that the cover can be pushed backwards and hung out? Of course after the one screw has been loosened in front? In a Peugeot forum I have read some of the instructions for the repair or orientation of the sliding door, but could not download or view it because of lack of sufficient posts, is there something for Citroen too? If so, where can I find it?

  • Opel Agila with engine Z12XEP – Problems after engine replacement

    Hello dear Opel friends ..I have a problem – can someone help me … when driving with about 90 km/h (fast road) have noticed the car train loses and in mirror at the same time white cloud seen. shortly afterwards a blow in engine room.Coupling through and on the side strip stopped after 3 hours with the yellow fishing to a known on the pit.. soo…”friendship -faus”is there.. 3th cylinder pile bar broken.in engine block (out of cast) and oil tub. is a hole…. N eue engine attached .wanted to start —-no success. Selected errors. —-P0335 -, -KW sensor .exchanged. Petrol pump running. On tacho shows car with slussel. Cable checked for cable breakage. Contact 27 and 43.in control unit plug. New KWSensor-checks.after 3 ml starter spin (engine start) error code is back.0335 —could someone help me further ……

  • once again: Start problems, this time after battery was emptied

    Hello guys, after my AGILA A Z10XEP has been standing for a long time and the battery was completely empty, he didn’t jump on any more, despite new charging and also exchange of the battery (although only 1 year old, but rather deep discharge). At the very first start attempt he ran very briefly, but then died off. When the ignition was switched on, it clacked at the beginning from the throttle valve unit and the control lights flashed in the same clock. Petrol pump did not buzz. So Pump relay removed and bridged: Gasoline pump buzzes. Relay checked: works. Ignition without relay: absolutely mute, no clacking and no buzzing. Relay again: when ignition is in, it remains mute. Tryed with spare key, same result. Diagnosis memory read out: no error stored. I think I already had it all, but can’t remember how I fixed it. The contact problem with the speedometer as with the Corsa is not with the car, who Can this be related to the unloaded battery or a random error as it often occurs in combination?

  • Questions about: vacuum hose, pump, temperature sensor, intercooler fan

    The old bridge has a Temp-feeler but I did not find a free plug there. However, it can also be that the wire harness was also changed because I got a tree. What does the loss of the sensor mean?? On the right side of the engine compartment there are two black vacuum hoses at the top of the spray wall. E the two go under the cover of the suction bridge (connector) and then where else. with me the end of the line hangs freely around. Where does it belong??? In the small fuse box (motor room) the fuse for the charging air cooler fan has burned down with me, so that I had changed the fan after a short check. That also fits to the temperature problem. Now it is unfortunately that the temperature on the track still rises and that the fuse still burns. What hangs the In order to check the pre-shipment pump I unscrew the silver lid in the trunk and then alternately remove the hoses there. Neither at ignition, has glowed, nor when starting came from one of the pipes diesel. Was this the correct test, the VFD sits under this lid? Further questions about the VFD should then possibly jmliff put. Gruss Saje

  • I know there is already ! ? BUT NOT ?? Climate control unit expansion

    Hello, just wanted to expand my climate control part and started quite well. Radio shaft was already empty, so ashtrays out, screws loosed and then I wanted to press down the metal handle, and then was off work -((The handle is probably right out of its holder and of course brook long fiddling I had him out of the left side also and now I can scratch my back with it -(Sch….tt What can I do now, so that I can remove the aperture k ann ???? I can remove everything around it, but I wanted to do it after the control panel. Who had the same problem before ????

  • HiFi in Omega Caravan

    Hello guys, unfortunately the search did not bring me the desired results, so I open here a new thread: I want to adapt my caravan something to my HiFi needs, because the series quakers do their name honor all. I have already installed a radio – Kenwood KDC-M-907, now I would like to install another front system, but if possible without AMP. Does one of you have something to do with it? I have followed an auction at ebay once with a system of B OSE for the Omega – went away for almost 200 eurons, so I thought to myself, only net so expensive. I don’t want to put one of the cars together that drive through the city with open windows, and play the system for everyone, but I want to listen to louder music than the normal LS can handle it. Who has a tip for me ??

  • Buying advice Omega

    Hello guys, I would like to ask you a question. I run a sailing school in Bavaria (that’s why mine is also the segelomi) and need a station wagon. You have so many things to take with you to the lake. Also, the omi needs an AHK because it sometimes serves as a drawhorse. However, the trailer load keeps in limits, so around the 400 unbraked and 750 braked. Now my question: is it enough for the “small” diesel, or should I rather go back to “V6”? enziner. Where is the diesel in “actual” consumption and where the petroler, also than 2.2 L ?? Are there alternatives ?? I drive about 35,000 km a year, mostly in 5 to 20 km mode. Ask for as much information as possible. I think mine doesn’t make it that long. The friendly has murmured quite a bit during the last reperatures. Greetings from Franken

  • Omega 2.0-16V, V6 or an MV6??

    Hello dear ones, I play an Omega with the thought of putting me. My savings feeling tells me that I should take a 2.0 16V. I just don’t know if the 136hp and the 2l are not too weak for the mass car and man who is there. So rather a V6 or a MV6??!!!?? MV6 I think by consumption is damn expensive. But the fun would be worth it to me. Must the woman just eat less, which wanted to lose anyway! What worries me that the MV6 apparently I already know this from my old VW Passat VR6, which was also a dime grave. Therefore the thought would only be between a V6 or nem 16V. I also read that one should not take an Omega before 1998. However, since I don’t have enough cash to get one, I think it will be no more than 1996 or 1995. What can you tell me about it? How is the Omega 2.0-16V compared to the V6? What do you have to do? when buying? Should I perhaps invest the money better in two bikes? I’m just not quite sure if my gut feeling is really good and I should give it to him!?! HELFT ME!!!

  • ATU – crazy tires – need advice

    ATU – crazy tires – need advice Hello! I’m new here and hope maybe someone can give me some advice. I was at ATU in Gera in June to change my timing belt (+ the free check for brakes and chassis). Then a staff member called me at home and told me that something was wrong with the track at the front. The track rod head at the front left has to be renewed. So what must be. After that there was a measurement protocol ..all iO.! Previously 0.36 after 0.0 6. Until that time I never had the problem of one-sided tire wear!! Last week I took off the summer tires, and got the shock completely. The left rear tire is completely flat in the outer third. The wire comes out already. What could have happened. I to ATU in Hagen (here I live). Again protocol, graciously at the expense of the house. This time back 0.45 (Lt Gera before -0.18 after 0.12). How can that be? In 5 months tire flat though reported Atu has offered me 30 percent on new tires. That’s a laugh. I have to buy 2 new tires. And I should also have the rear track bar changed. And the best thing is, it should be so rusty at the back to the right that they could only adjust it from 0.33 to 0.18 and not to max. 0.15. Only funny 5 months ago it was not rusty because they allegedly corrected the value from -0.27 to 0.09. I didn’t have an accident and I don’t take curbs with me either. I drove 7000 km in time. Who knows about it. What happened or didn’t happen at ATU??? Atu says the protocol from Gera was fine. Basta! What about my guarantee? How should I prove the ATU mess? The 2nd boss at ATU admitted it and said if he was boss I would have got 2 tires right away. But Big Boss feeds me at 30 percent. He says I’m supposed to write to the management, but he also means that it’s not very successful. So how can you explain that? The values despite surveying? Best regards Claudii