So I really want to give you a commendation. here in this forum it is really friendly to. that sometimes who fights is always there. and in things tips & tricks you always have good things in stock and you can ask you what has not necessarily to do with the car. (e.g.: ebay) and even a successful meeting you organized what I also highly charge you. (unfortunately I was not there) all in all I would like to say the following: This is the conclusion I came to, since I have now driven around a while in the bmw forum. and there you can feel the mistrust and envy so strong. many don’t even believe that one has such a car bla bla. and if you need a tip you have to wait forever or it doesn’t come at all or you’re being fooled somehow. you hardly see such things here although the omega in the new to stand is also a quite expensive car. so a high of the FRIENDS CHAFTLY omega atmosphere. I hope that hasn’t been too narrow, but that was on my heart.
Category: Smart Forum
-
Spring-leg cartridge (suspension damper) clamps in spring-leg
Hello, I just want to change the front shock absorbers at my Commodore C. The parts clamp but really tight- up have the game- you can push the something back and forth- but they seem to clamp down. I have tried everything now- the only thing I could think of now to drill a 10mm hole in the lower lid of the spring leg, where I can then knock properly on the bottom of the shock absorber with a round steel. Logically, I have to be careful that I Do not drill the shock absorber cartridge. I can close the hole with a stopper. Or is there any other idea?
-
Omega B – Electric. Window lifter in the back, Limo and Caravan in the same way?
Moin colleagues, since my godchild (see below) is unfortunately no longer passing by Uncle TÜV in September, I bought a successor: Omega B Caravan 2.0 16V. But with the car the electric window lifter is in the back right in the bucket. The engine buzzes but the window remains closed. For this, noises appear like grinding gears. I suspect that just these are blown away. Now my question: Is the mechanics and the whole part of the soda and the caravan equal or I have to myself specially Looking for the Caravan mechanism? Greetings, Erik.
-
Radio installation … I’m too stupid :/
Guys, please don’t laugh, but I don’t get my “new” radio installed on it. Basically, I’m afraid that this huge plug block is always in my way. There should be enough space – at least a big void yawns at me but the last 5mm are only possible by pressing and squeezing and on such a thing I react very allergic after a car fire. There are certainly some of you who don’t have the original Opel radio in it anymore and also How did you do that? And I would like to have a tip: on the radio to be installed there is a USB connection (external plate) on it, which leads into a normal USB connector. This connection is about 30cm long and should be laid so that I do not have to drill as much as possible but also get there at any time (to be able to remove the hard disk, for example). The glove compartment would be very chic … there is a possibility that not necessarily Kurt’s level of skills required for implementation? Thank you
-
It’s warm in the car…
Hello you love, After I have been driving around for 2-3 weeks without climate cooling I made an appointment for climate maintenance today… Before I go there I wanted to ask myself what I can check before as a lye why it doesn’t get cold in the car. Klimatronic stands on LO and pales full can in AUTO mode and ECO is off… So I know this anyway from my black Limmo and since you had to put on LO position almost gloves in the Ommi… previous owner also the calculation of the last climate maintenance from July 2010… The big safety under the steering wheel has already checked. Achso irwoo I have read once that if too little coolant is in there the compressor does not start at all… Looking forward to your answers… Greetings Max in warm Ommi
-
Camshaft earlier running C20NE
Hello has a clue, have me a C20NE processed channels on 40mm valve seats to outside. Compression raised to 10.5 SEH camshaft, adjustable cam wheel, fan manifold, 24V Kat with 57mm passage group N system. Eprom adapted. now to the problem; I let the cam run a little ahead( wanted to lose power and responsiveness from below) engine runs well, now also turns willingly up to 6800/Umin, at my age I turn but not there, have at 6500 good connection. w I start with high outdoor counters in the city traffic uphill e.g. ringing for a fraction of a second. so my thinking; the engine has an OT dealer. the rest of the ignition characteristic is stored in the Eprom, distributor is rigid. because I run the camshaft earlier. so in the direction of a clock. away from the make-up. is the runner in the cap yes also earlier. if I put the cam in the direction of the original the runner is later on the first Zylind he and the spark. or am I completely on the wooden way.??? if someone can think in and give me advice please answer. I thank you in advance. gr. poorin Possmann
-
C20NE Problems + Conrod bearing damage ?!
Since I have my C20NE in the Corsa there are a few problems. Even though: 1. What can it be that my NE is already operating hot after 2KM driving ? Already shortly after starting the fan radiates extremely heat. Have then 95° operating temperature which can also be held. In the stand it goes up to 100° until the fan goes on. Thermostat is 100% in order because the cooler is bang “hot”. 2. He dies as soon as I have driven longer sometimes in idle mode and is then only with gas 3. Now I hear a strong knock on the area of the 2nd cylinder. From below you can hear that very well. What could that be, conrod bearing damage? But from the head that does not come. If the engine is warm, the knocking is gone. What consequences can a damage to the conrod bearing have? Bzw. what ads are there then? Here is a video where you can hear the knocking at the beginning. Video@Rapidshare
-
Experience with Irmscher LPG plant
Which users already have experience with the LPG analge by Irmscher. Man always tells me (selnst dier kinder opel dealer you should leave your fingers away from LPG in together with Opel engines. However, this should be remedied with the Irmscher analge allegedly – is more expensive than the otherwise offered analgen but if it as alternative would help that would be good. Also with the Opel dealers in recent times you can see now more often that your Astras and Vectras with the Irmscher Offer analge for sale. As a loyal and longtime Opel driver and frequent driver it would of course be interesting to drive with LPG system. So please all come back with your experience. Thanks in advance
-
Set petrol pressure, increase,c20ne
Hello have brought me a BDR adjustable with watch. how do I go? to the engine. C20NE with motronics 1.2.5. Eprom aerated,angapasst! Cylinder head channels extended to 40mm, valve seats to the outside.Ventile polished erl. head planned. to come to a compaction of 10,5. Fan manifold,4.2.1 with 55mm connection tube to 24V steel cat.57mmto group N. Bohnrat power tube(only because the rubber part was risked)Nass air filter.K-N. The engine is running really well, only if it was very much outside m it is a fraction of ner Secunde, like every car with the hot Lambdareglung. the system pressure is 3 bar, if I install that part, the pressure must have already 3 bar without negative pressure and it will be series already more than 3 bar. who knows itself? don’t want that I already come under serial pressure. how is the pressure series in stand? so that I have a basic setting and then can increase the stepwise. would like to see then on the role so that I can see if it is fat at vollast. I feel like he starts braking at 6000.Magersquecht? achja the camshaft is from sight with 130 Ps. so nothing world-moving. must come there with a little more petrol pressure. would be very grateful for your help. gr. armin Possmann
-
MOVANO replacement engine for 3th defective no warranty?
Hello guys, maybe someone still has an idea what you can do in order to somehow get to a culant/guarantee acceptance. to the facts. Movano is commercially used = 1day failure without Fz, without car rental = 1 day no money earned! Movano bought 2004 > 2008 various problems (electric wrongly connected and and and and)03-04/2008 – Turbocharger defective + Turbo replaced – FOH determines MOTOR flatt ( FOH tries to get 15 days new engine) + engine changed after 3 weeks (c a. 10000 Euro all together without a rental car)10-11/2008 (about 30000km since new installation) – engine makes loud noises – FOH checks and says cause: noises from the pleu bearing + repair: crankshaft (after 14 days) renewed, operating materials OIL & frost protection replaced “guarantee takeover by OPEL”01/2009 – vehicle stops on the way – ADAC pulls Fz to the FOH – FOH makes the following TECH2 test, actuator test pressure valve electr., connection valve measured, control unit measured + repair: cable interruption fixed and additionally air filter insert renewed (164,40 Euro) 07/2009 (about 80000km since new installation) – car runs unround and rusted (about 30000km since new installation) – FOH finds errors after 2-3 days = cylinder head seal and cylinder head must be replaced + after approx.14 days car finished costs 4100 Euro oil change / belt change have always been made. After consultation customer service and service manager at FOH the following result! Opel does not assume any warranty or culpability in any respect, because there is no inspection scatter! Now to my question: When 10-11/2008 the crankshaft was installed, was surely the whole engine tested, more than during an inspection? Would you have seen if there was a problem with the cylinder head? At the tests/work 01/2009 someone could have noticed that there was a problem with the cylinder head? eug already 3 weeks on the farm also the customer is addressed: “You should join the inspection immediately.” Thank you for your answers! Greetings