Category: Smart Forum

Hello together I have the following problem. Have my Omega ’02 with automatic gearbox not driven out of the garage for longer time and now the battery is empty. The problem is that I don’t come to the battery to charge it or bridge it, because I can’t open the hood for space in the garage. The only way is to push the vehicle a little backwards, but what is not possible because the automatic is on (P) and I can switch if the engine is not running on (N). Does anyone of you know how I can switch the automatic to (N) without the engine running anyway??

Hello, I have a question about my hand brake on the Omega B (year 1995 ; automatic ; 2,0 ; 115hp) I have to change my normal Brem, coverings in the rear and wanted to know if I need extra brake cheeks or brake pads for the hand brake, or if it works with over the normal brakes on the rear axle? If there is a separate brake for the hand brake, it would be very nice if someone could tell me where exactly on the axle is. Greeting Andy………

Hello, have a loud high tone at my Omi 3l Bj 2000 at the cold start for some time, such a kind of whistle in higher position, sorry it can not better describe, the whistle becomes quieter the warmer the engine becomes, what can that be? have already fear that something bigger kaput is going on! Reinhard!

The car has often not been moved at all, often only 1500km/year. If I buy it now, it falls apart in horror when I drive the first 800km at a time, right???Please for tips, thank you. 2,5 V6 Petrol B-Facelift Limo What does he swallow?

Hello together, unfortunately I decided for a2,5liter machine and also bought one already.Now to my question have found a workshop to disassemble the half motor change all seals, timing belts,zkd and so much more, THE PRICE 1000euro plus material so together about 1800euro is the price ok??????????????????????????????????????????????????????

Hello ! Karre was totally renewed in the front (crossbars, stabi jacks, couplers) Nu soll it to Tüv/HU . Right to the beginning ,sobering diagnosis : game in the wheel bearing ! Against a small expense contribution the Stk. : 220€ plus. installation ,would be done by the Mahleur . Can it be that the TÜV fails ?? The problem ,is that I need the part every day , u. the part dealer first has to order ! Thus I am to the FOH , correctly delivered .

Hello guys, so with me on the omi you might think that he is laid deeper what def. is not the case – the back was always a bit high and fits on the front axle between mature + body max 1.5 hand widths!!! Behind fits almost a head in. so yesterday I brought my car out of the workshop and i my back is now even higher what can that be?

Hello, I discovered something on the Internet. Apparently Opel is planning a successor for the Omega, with rear drive and even with a V8 engine with up to 365 hp. Here the link http://www.autozeitung.de/…/21 White da villeicht already one more about it?

Hello guys, maybe you can help me or give me a few tips. First of all I have to let go of a big praise to the community here. I already have some problems with my Omega B, 2.5 l., V6 Kombi Bj. 1995 and still learn about it. Last Monday I was at the TÜV with it and did not get over it, as expected. “Handbrake has worked unilaterally and too badly, the front brake discs are too worn out to them”. No rust or other flaws!!! ASU easily! I ordered the necessary material and will do it this week. But now my problem (since today occurred again): When speeding up the engine shuts off at about 4000 revolutions! The error code “turning number sensor – wrong signal” which I then read out makes me a bit stumpy, moreover I had the same problem as before a few months ago and it was still a lot of fun for you to have cleaned up your car’s speed. At that time I had no error code. Only I can no longer remember what I did at that time. In the meantime I already had some other things on the Omega and a bit of a bad engine.

Evening! Would there have been a question to you, and this is about the following: Have Omega B built in 1996, 2.5V6 with at the time 164tkm on the clock. Now I think about slaughtering it and selling it in part…. But doesn’t want to let me pull over the table with the prices. Can one of you tell me what e.g. the machine brings with it parts? What can one demand for the gearbox and the Diff? And what else can a leather equipment be provided after school grade 2-3?!? Original Opel aluminium rims in 15 inches? Would be grateful for tips because I don’t want to be taunted. I compared here and there with a scrap metal and am curiously getting out of it. Completely the car is supposed to bring only 1200€…. Thanks already, Alex gruß