Category: Skoda Kamiq Forum

Hello together, I think about buying a Kamiq. The price advantage over an EU vehicle is already worth mentioning. I would only be interested in what is different in detail compared to the German version. [Transferred from engine talk from the topic ‘EU vehicle vs. German version’.]

Hello, now it caught me 6 days before the expiry of the (extended) warranty: automatic tailgate defective. The flap suddenly did not open completely, during the closing attempt only a beep came out. With Skoda error read out, right drive defective. On guarantee received new drive. Once researched, is a common error across the VAG group. Mostly cable break directly at the drive. At least held 36,000 km and almost 5 years. Bin little driver and no pizza service. Origi nalpreis bei onlineteile.com, VW, 718,87 €. The Skodamann could not give me a total price, as guarantee. There is in any case still 2 X error reading/-extinguishing plus assembly. In the net find such drives from almost 80 €, from China, the originals are certainly also produced.

Hello together! I took over my 2 month old Kamiq presenter 3 days ago and now try to connect with SkodaConnect every day via the infotainment system. In the app I am shown a code to become main users that I have to enter in the infotainment system and no matter how often I try it, the message “The vehicle activation failed. The PIN has been entered wrong. Please try again.” : – Deleted the car from the garage and re-registered with the FIN – Deleted and re-installed the app – Deleted my complete user in the app and re-registered me – Completely reset and re-installed the infotainment system Unfortunately none of these steps were successful and the problem with the alleged wrong pin persists. Does anyone know the problem and has a solution ready?

The VZE in our Skoda Kamiq generally works very well, but there were some curiosities there. In the European elections of 2024, an SPD election poster was recognized as a 15 km/h sign. Note: The list placements of the candidates were printed on the posters used by us, with the number in a we The poster was available with different candidates and numbers; the one with number 15 was once “recognized” as a sign. Reminds me very much of a forum post from the Skoda community, when an Octavia would have recognized a bicycle path sign (with number 70 in a circle, but clearly smaller and different colored) than 70 km/h sign and would have accelerated to this speed with active travel assist. The thing is in a 30s zone! See here: –> https://www.skodacommun ity.de/…/ Other VZE “experiences” in our Kamiq were mostly due to non-standard signage. What have you experienced with VZE? Also such funny anecdotes, in which any things that are not traffic signs were recognized as such, something completely wrong was recognized etc. ? Just write your curious experiences with VZE. No matter which brand or model (but please include). Greeting @ManuelNeuerFan1

Servus people? 3 weeks ago I bought a Skoda Kamiq Montecarlo 1.5l with 40T Km everything like licked, you might think it’s a new car, also has a guarantee. As far as I was at home and wanted to go the next day, it started to give VR while driving backwards as forward while turning in a loud cracking of itself, it cracks 1-2 times and then it’s ok again. It sounds like a tension cracking of the spring. I know the noise from the past when we used to have a n sport suspension had been installed and a spring was not right in the hollow where the spring has its place. No suspension or lowering springs were installed on the Kamiq. The only thing I did was that I drove in sport mode or I drove in S mode. At first I thought that the previous owner never drove in another mod and therefore has to settle down because it was never used. I gave the whole now 3W time, but it still cracks, my question is therefore What could it be for you? Had already called in a Skoda work which offered me an appointment in 4 weeks. For the sake of interest I wanted to ask you here in advance what it could be and vllt. one of you had the same problem. Say thank you very much for your help.

Moin, (front way, I was not personally with the TÜV) at a KMStand of 25,658 was found the following: “brake disc 2. Ache li and re bearing image defective”. The examiner only said that the discs/brakes generally had rust. What he proposed he did not say. TÜV refused. The measurement of the 2nd axis resulted: Operation Sensor 94,1/Actuation 533 Measurement + Functional values li 162, re 161 Share in % Is 21,2, Min 15 The brake rusting, metal, is logical. If I drive little , brake all the more. After 26,000 km ? With my Octavia I have had no complaints at all at 85,000 km . Before I give an order to a workshop I want to find out a little more – here through you and I also listen to – thanks ! Greetings elgete !

Hello, I have the arrow-dark position with my Skoda Kamiq jg.2020 if I want to navigate the map representation in the AID but would like to have the arrow-dark position. In the Skoda Karoq jg.23 I could change this in the MIB3 with Kamiq also MIB3 can not. Can you possibly program this via VCDS that it can also be done in Kamiq? If yes which settings with the VCDS. Thanks Grüess Peter

Hello, looking for a suitable vehicle for my parents, I came across an unbeatable offer for a Kamiq Facelift. Question 1 Now this vehicle has only installed the base LED headlights. Since I find no experience of the base LED for this, especially for the Facelift, I wanted to look around here. Are the headlights satisfactory with regard to light range and illumination? I know that this is always a very personal assessment, but I also know that My father had a Golf 6 with Xenon so far, that was okay for him. The Golf 6 didn’t necessarily have the best light now. Question 2 Is the automatic (simple) driving light automatically included in the Easy Light Assist? I find unfortunately nothing suitable for this, only that the driving light goes on and off automatically. But I always connect the Light Assist at VW. Please don’t stony me if there were any hints in the forum about my questions. However, I didn’t find anything about the Kamiq Facelift with base LED headlights. Thank you and a nice 1st Advent.

I have Kamiq with Amundsen and a VCDS cable. Have i tried a few encodings for VZE but without result. Then on Internet i read the Kamiq ne MIB version 3 has and for that is the coding other. Does someone know how i can encode it ?

Hello together, since the Kamiq has been available for order recently, I just wanted to create the waiting room for the Kamiq, analogous to the Karoq. Here everyone can shorten the waiting time a bit in mutual exchange. At the same time we have the configuration thread, where all questions about your configuration can be discussed. Then I only have to wish that the waiting time passes as quickly as possible.