MOTOR-TALK

Category: US Cars Forum

  • Approval centre and two-line registration plate for Dodge

    Hello, I have bought a Dodge Avenger 3.5 V6 R/T 2011 US import and will allow the days. What amazes me is that it says on the vehicle license plate: Space for rear license plate 360x120mm The previous owner had a rather short license plate DU-*** But such a license plate is not free What do I have to do?I imagined a two-line license plate, which would also fit but of that there is nothing written on the license plate In Duisburg the registration office is pretty much stubborn they won’t give me a two-line license plate without a letter, I’m pretty sure. What do I have to do? In the appendix is also a photo of the vehicle license dear greetings

  • Korea Chevrolet

    Korea Chevroet How is the resurgence of Daewoo in Chevrolet (Europe) recorded in D? How all-round and how among us-drivers? Here in Norway, where I live, this is made into a spoett. Chevrolet was already well established here, especially with big suv’s and pu (suburban, tahoe, silverado, van’s….), from import-taxing greens. Almost every corner you trip on which. Now these “toy cars” come with the same emblem! So the call of Chevy is more destroyed here! chevrolet haendler (=Opel haendler) still has only Tahoe, Silverado and co. in the program. A Daewoo haendler (or former) does not exist with me. I hope that stays that way!

  • Trampling the rear axle

    Hi, I have now installed a loosener in my rear axle and have since the problem that the rear axle in spite of Caltracs and Superstock Springs tramples sobnald the wheels. Now I wonder what this could still be about, have not driven a car with a loosener itself. Is this possible normal? Or could it be due to the rather hard yellow Koni dampers? Or the high vehicle weight on the rear axle?

  • Climate Error codes Cadillac OBD1

    Hiielfe! On his 7th anniversary with me, my Cad (Sedan de Ville 1989, on-board diagnosis-1) does not please me: The air conditioner reports the error code F 48. And she just got a new compressor (including dryer, flushing and new filling) for a medium fortune. Does anyone have an idea what they want now??? If you want to turn it on, (car), she immediately goes to Econ and the service AC control lamp lights up again.

  • Intake bridge changed… clacker, clacker, clack

    Hi people With my olds I changed the suction bridge(455Edelbrock) Since then the engine has been clacking in the lower speed range…the more gas you give the faster the rhythm of the clacking becomes. They told me the Pontiac and Oldsmobile under the Ansau bridge had some tin and it is probably missing now!? That’s why the clacking? Do you have an idea?

  • How big is the chance for a US bargain in Germany?

    Many of you have been watching the market for years – I’ve only been here for three weeks… My question to the experts: Does it happen every now and then that someone offers an older US car ECHT cheaply, e.g. because he urgently needs money and the demand for such cars is manageable? As I said: I mean cars that are REALly cheap, such as the 1974 Olds Ninety-Eight from the colleague for 3000 euros, so not cars that only seem cheap at first glance and that the How would you see the chances? Or do you say: “Dream on – there are no such bargains.” ?

  • Opel monza a capital investment or loss

    Hello I hope I’m right here and can be helped here. I got first registration from Grandpa the opel monza in early 83. With the 6 cylinder rows engine. Color whites it original condition with extras like the 255 rims original and other original accessories. The car now stood it 15 years the barn and has barely km down. It has to be done after the stand time some. Here now my own question. Opa is convinced that the car will increase it’s worth and I can’t find anything about whether he’s an investment. Can one more help me here. I hope very much.

  • C-Kadett for slalom mountain races and circuit

    Hello which cadet do you recommend me for this kind of race? It should be a C-Kadett because of rigid axle and rear drive and of course a Coupe In the ideal case it should be after I’m finished look like this http://youtube.com/watch?v=dS-bpJdHMHs are also available at the coupe also different types udn what should I pay attention to, which has he weakened and which motorization should be in it as a basis (I know depends on the class but what is the best motor)? a car come or you have much. also another one you want to get rid of I also like to take an AUto that was started to build it just shouldn’t be completely finished because I don’t have 5000€ that I can spend for a short time wanting to build the car slowly first then also slalom drive because you don’t need so much motor power thx in advance already

  • Antenna change Kadett D……..BITTE HELFT ME ! ! ! ! !

    I recently bought a used Kadett D. Unfortunately he has a break in his antenna and I have to replace it. It is installed in the passenger’s code wing. Since I don’t have much money I want to save myself the installation costs that still get to the antenna. I have bought a universal antenna already. Only unfortunately I don’t know how to remove the old and install the new one again. That means, I can install it then already. Is certainly the same way, if I use the a Let me remove it. PLEASE WHEN YOU CAN HELP ME , HELFT ME ! Thanks for this already in advance . Your Fireball …..

  • Short-term identification marks ?

    Hello , We recently re-furnished a Manta B (BJ. 88) i.e. completely tuv finished ! I want to do it after the winter to tuv and then also register ! now I wanted to test the car before 2 days or so , the car and again properly move . there is for it something like a short time mark ? the problem is only that the car has no tuv ? goes still something like that ? Greeting Morphs