I took over a wasp 4 years ago. She had an old “acid battery” in it which was completely empty. I always started over the kickstarter. Since it was already at the end of the season, I had bought a new battery at the next season start. GP Pro G89-B Gel (gel battery). Since the gel batteries should be maintenance-free I had decided for them. At the beginning everything was good. Jumps well on and after about 1.5 months again empty. On longer distances it apparently charges something on , so that you can start the wasp again after a short coffee break with battery but if it stands a few days it is empty again. If I charge the battery itself it stops again a few days and is then again empty. My driving profile is also rather little. Every 2 weeks times a few short plug. I sometimes look at wasps weeks standing and they jump with battery always immediately. Now the question: Is the battery generally scrap? Is the gel battery suitable for the Vespa at all and provides the Vespa with enough energy to charge the battery again? Or is the LiMa too small and the Bat. to charge? I would be happy about your experience. Greeting Timo.
Blog
-
Battery defective?
Hello forum. After my car battery ran empty for the second time in my Nissan Almera Tino (2004) I looked at the power consumption at rest. This is about 60mA. This is supposed to be still normal for my research. The alternator delivers a voltage of a little over 14V. I then recharged the battery again (about 13V) and once measured the voltage when starting. This drops to about 11.6V at the start of the system. How can this be evaluated? The battery (Bosch 44Ah) is only about 1 year old. Can it be that it is already defective? MfG has left the charged battery for several days and found that it is not connected, 0.02V per day.
-
Brake plates despite ABS
With my car (Peugeot 308 GTi, year 2020) both front tyres have a brake plate. How can such a thing happen with a new car with ABS? The tires Michelin Pilot Super Sport did not run 300 km. A particularly hard braking is not in my memory. The rear wheels are without damage. Where can such a thing come from – could it indicate problems with the ABS? Can something have gone wrong during the assembly of the wheels through the repair shop? I am a bit perplexed.
-
Wiring harness has passed through – error search
good day! We are just measuring a motor wire harness. Both sides are plugged off, ohmmeter attached, and see there: The cable colors, which are the same, do not go through in some cases, for which one can measure a passage between different cable colors. Now we have searched for the error…on picant places (so where the tree was exposed to heat), we have opened it once, but inside all the cables are intact…sttecker don’t look like they were a good day! we are now a bit at a loss where you could still start, and thought we were asking here for ideas. thank you already!
-
Information / purchase advice Chevrolet Suburban
In the longer term, I plan to purchase a Chevrolet Suburban as a touring vehicle or fun car on long distances. I have looked at the years of construction from 95 to 99 as 4WD and petroler for the purpose of autogas retrofitting. What are the weak points in these years of construction, what should be taken into account when buying? Where can you best accommodate a car gas tank as large as possible without reducing the loading area/case space? Which importers / dealers are missing, which also What does the supply of spare parts look like? Sources of supply? Since the information about the technical data in the Indernett is rather dull or comes from the latest models, I am of course also looking for as much of it as possible. Dimensions, weights, performance, trailer loads, ect. The best question, of course, always at the end: What does the fun cost? Insurance classification? Consumption with “normal” driving mode (many highways, some highway and rather little city; Indigenous in the normal range)? Is one with approx. 15 to 16l/100km petrol or 18 to 20l/100km gas? Taxes with Euro 2? Spare parts and wear parts? That this monster is slightly more expensive than my Volvos is clear to me. Just asks the question, how much more expensive. Sorry, for this mixed of questions, but I would be very pleased about a detailed description of yours. For this soon a V8 blubbers under my ass. MfG Mirko PS: Hie mal ein Example of what I would like to see in ehwa: http://www.off-road-schoener.de/…/P5060030.jpghttp://www.off-road-schoener.de/…/P5060019.jpg
-
S. Vettel on 1. !!
Respect !!! I have to admit that I was quite wrong about him…….good, little sprite new mature….but even then it must fit…. it seems to me that today an M. Schumacher successor was born…. respect !!!!P. No Driver Team – Engine Tyres Times Ave/Gaps 1. 38 VETTEL BMW Sauber M 1’28″091 218.147 Km/h 2. 6 MASSA Ferrari B 1’28″164 + 0’00″073 3. 12 BUTTON Honda M 1’28″506 + 0’00″415 4. 36 DAVIDSON Honda M 1’28″598 + 0’00″507 5. 7 R. SCHUMACHER Toyota B 1’28″614 + 0’00″523 6. 5 M. SCHUMACHER Ferrari B 1’28″819 + 0’00″728 7. 37 DOORNBOS RedBull Ferrari M 1’28″848 + 0’00″757 8. 3 RAICKONEN McLaren Mercedes M 1’29″042 + 0’00″951 9. 4 DE LA ROSA McLaren Mercedes M 1’29″112 + 0’01″021 10. 11 BARRICCHELLO Honda M 1’29″214 + 0’01″123 11. 39 MONDINI Midland Toyota B 1’29″719 + 0’01″628 12. 1 ALONSO Renault M 1’29″741 + 0’01″650 13. 40 JANI Toro Rosso Cosw. M 1’29″858 + 0’01″767 14. 21 SPEED Toro Rosso Cosw. M 1’29″890 + 0’01″799 15. 8 TR M ULLI Toyota B 1’30″006 + 0’01″915 16. 41 MONTAGNY S. Aguri F1 Honda B 1’30″491 + 0’02″400 17. 17 KUBICA BMW Sauber M 1’30″502 + 0’02″411 18. 2 FISCHELLA Renault M 1’30″504 + 0’02″413 19. 35 WURZ Williams Cosworth B 1’30″509 + 0’02″418 20. 20 LIUZZI Toro Rosso Cosw. M 1’30″551 + 0’02″460 21. 9 WEBBER Williams Cosworth B 1’30″775 + 0’02″684 22. 15 KLIEN RedBull Ferrari M 1’30″889 + 0’02″798 23. 10 ROSBERG Williams Cosworth B 1’31″015 + 0’02″924 24. 22 SATO S. Aguri F1 Honda B 1’31″091 + 0’02″798 23. 10 ROSBERG Williams Cosworth B 1’31″01 0’03″000 25. 23 YAMAMOTO S. Aguri F1 Honda B 1’31″316 + 0’03″225 26. 18 MONTEIRO Midland Toyota B 1’31″519 + 0’03″428 27. 16 HEIDFELD BMW Sauber M 1’31″526 + 0’03″435 28. 14 COULTHARD RedBull Ferrari M 1’31″540 + 0’03″449 29. 19 ALBERS Midland Toyota B 1’32″102 + 0’04″011
-
What’s wrong with Alonso?
(F1Total.com) – Although Fernando Alonso was only punished for a “brake test” against Red Bull racing test driver Robert Doornbos at the last race in Hungary, the reigning world champion in the 2nd free practice came together again with the Dutchman. The television footage shows how Alonso sits in front of a left turn next to Doornbos, then wants to slow him down inside in the curve, whereby the Spaniard slows down and slips into the competitor, who is his The race management should take a closer look at the incident, because it was unnecessary in a free training – so it can not be ruled out that a punishment is again pronounced.
-
Rain Race–>Risk of Accident
Quotation: Original written by Habe-kein-Auto I can do ko**** when I read something like that. Have you ever seen onboard recordings of a rain race? If you drive one after another, you only have the edge of the track as a point of reference, otherwise you can see absolutely nothing. And the statement of DC, he would have no experience with it, is silly. The guy has been driving F1 since 1994. So I would consider that with the intention already given.
-
HD Sporti 1200 BJ 2008 – can you or shouldn’t you mix engine oil?
Hello Bin Grad desperate. My motorcycle had little oil in it. Wants to tip what I also did.. 20w50 is on my last bill when changing oil.. assume that the mineral oil was/is in it. Then I accidentally tipped full synthetic oil 20w50 on it.. had the motorcycle also had a short time on afterwards.. my question, is there something bad happening now with my engine? Someone told me that you could not mix these oils.. could clump… or get greasy. Should I rather leave the oil completely out of my oil tank and then tip new ones in? Oh yes.. after I had to fill it up shortly after the oil, I looked again after the oil stand. It seemed strange to me then, because the oil in the oil tank looked like foamy.. that is not normal or. Use your advice.. Thank you Greeting Felix
-
Conditional drilling machine conversion to stepless speed adjustment
Hello I would like to convert our somewhat outdated boring machine to stepless speed adjustment by V-belt drive. First thought was to build a variomatic from a scooter. But maybe someone knows how to convert sets for such things. Is there something like this?